What should I do if the old dishwasher is broken and I can t twist it?

It's the sink drain, if it's broken, you can't get rid of it, you must give it to him. Get it out, if you don't tune it, you can find something to pry it out, although it is said that he put it in, but he must have rusted for a long time, so he got stuck in, so it can still be removed strongly.

If the drain in the old dishwasher is broken and can't be twisted, you can find a plumber or plumber to repair it and replace it with a new sewer pipe.

It's a dishwasher, well, the water is broken, it can't be twisted, it should be able to be twisted, you take that live wrench and twist it, and after twisting it down, you can change it to a new one.

It's just that the water in the sink is broken and can't be wrung out, so there is no other visit at this time, but to replace this. After a long time in the sink, many parts of the sink have rusted and there are bacteria. It also has an impact on dishwashing.

That is, the water in the sink is broken and cannot be twisted, so directly remove the entire sink and replace the drain.

If the old dishwasher is broken, it will not be twisted, so it is recommended to find a professional maintenance company with special maintenance tools and capabilities, as well as supporting equipment.

If you can't get it off, you can't twist it with brute force, you have to find a professional repairer to help you get it down, if you can't get it yourself, it may damage a lot of places.

The water is broken, and now there are a lot of dredging on the Internet, and the artifact can be bought to try it, if it still can't be operated, it is best to find a professional maintenance personnel The solution once and for all is to change a dishwasher.

You can find a professional person to help, or there is no good way to smash this, because some are old and have a certain relationship.

Yes, if the sink drain pipe is broken, and the joint is rusty, you should use a small hammer and a shower to cut it off and put it in a new one, just buy a new set and install it.

It's that the sink is broken and can't be twisted, you can find a way to twist it off, you can try it with a pipe wrench or before hand, it's really not good, it's bad and you can replace it again.

It's just that if the sewer pipe is broken, it can't be twisted, what should I do? Then you should find a hacksaw to cut it off and replace it with another one.

Normally, he should be Xiu dead, you spray some rust remover, also called loosening agent, and maybe it will be fine.

In general, if the sink is broken, you can restart it in the background.

The only problem that had to be re-removed and replaced with a new sewer pipe.

If the water in the sink is broken, then you must find a plumber and electrician, and ask someone to come and help you operate it and replace it.

If there is still in Baoji, go to them for after-sales repair, if it can't be repaired, then buy a new one, or change the brand.

It's just that the water under the sink is broken, and it can't be twisted. In this case, you should go to a professional maintenance personnel to repair and help you get a new one.

It's just that if it's broken, it can't be twisted off, what should I do, then it should be unloaded, it's broken, and I try to rust with a new one.

It's that the water in this sink is broken, and if you don't adjust this, you can find a professional plumber to deal with it, otherwise, the sink at home is broken, and it's really troublesome.

I think so, if the water in the sink is broken, it should not be screwed out, and a plumber should be found to repair it, so that it can be repaired in time and can be used.

In this case, you can cut it directly with a knife, you can get rid of it and replace it with a new one!

If it breaks, you have to destroy it, and then buy a new one and reinstall it, it's still easy to destroy.

No, the sink is broken, and it can't be screwed out, so it's better to replace it with a new one, and the old one can't be bought.

You are not a professional in this, just find a professional maintenance personnel.

A repairman is here to help you fix it, uh, so you can continue to use it.

You can't find the corresponding accessories, right? I suggest you tear it down and buy a new one, it's not pretty good.

Summary. Hello! Dear, I'm glad to answer for you! Hello, the sink water pipe is broken, find a section of the same water pipe, and then buy two two joint sleeves, a bottle of water pipe kind of glue, and then the saw saws the broken water pipe, measure how long, and then replace it with a new one.

Hello! I'm glad to answer for you! Hello, the dishwashing pool water pipe is broken, find a section of the same trapped water pipe, and then buy two two joint sleeves to destroy the slag, a bottle of glue for the water pipe, and then the saw broke the broken water pipe, measure how long, and then replace it with a new one.

If the connection between the sink and the countertop is loose, and the water drowning on the countertop, causing it to leak into the cabinet, such troubles are also common. Solution: First go to the building materials market to buy glass adhesive strips, because the sealing effect of glass glue is very good, and then seal the glass glue bought back at the junction between the sink and the countertop, so that it is solved.

2. The leakage between the sink sewer pipe and the underground sewer pipe is generally due to the aging of the rubber pad, or even cracking after use, only need to disassemble the rubber pad and replace it with a new one. When installing, you should check whether the water pipes and fittings are intact, while considering the overall thickness, and use as few connecting fittings as possible for installationLearn more about the fittings specifications, usage and other details of the water pipes, make sure that the whole drawing is familiar, and then Yebi installs according to the requirements of the drawings When installing the sewage pipe, the quality of the pipes and fittings should be checked to ensure the overall smoothness and cleanliness, and only the material should be cleaned to increase stiffness and avoid the trouble of secondary rework. When installing a sink in the kitchen, the kitchen structure is complex and the equipment requirements are not the same, so when installing the sink on land, all factors need to be considered, and it should be reasonable and practical.

Insert a plastic bottle in the sink, it's so smart, you can easily save a few hundred yuan a year, you have gained experience, great life tips, life tips, home hacks, I hope it can help you, thank you!

Pipe unclogging agents can quickly solve the problem of pipe clogging caused by food residue and coagulated grease.

Use rubber to pump through, and then decisively change the floor drain, recommend Wankang floor drain.

How to unblock the clogging of the sink drain pipe, the following steps are as follows:

1. You can boil a pot of boiling water first, pour it directly into the water outlet, and flush the water pipe through high temperature for dredging.

2. Pour some baking soda powder on the sink mouth of the dishwasher, and pour vinegar on it, the two will have a chemical reaction together, and produce a certain amount of bubbles, wait for about 5 minutes, it can dissolve some oil stains on the sewer pipe wall.

3. Then you need to pour boiling water into the outlet of the dishwashing sink constantly, and rinse it for about 5 minutes, so that the blockage blocked in the water pipe can be washed down well.

Using the hydrostatic method.

In fact, the principle is very simple, the pressure of the water can be used to wash away the foreign matter, and the effect is also very obvious. Finally try the water to dredge completely and there is no clogging at all. We can deal with oil clogging, prepare dish soap to squeeze into the drain outlet, then prepare some baking soda, then vinegar, we can use aged vinegar, we can use white vinegar, and finally pour a pot of boiling water.

Baking soda reacts when it meets vinegar, and dish soap heats water to deal with oil.

Hello, let me come to your questions, thank you for your consultation Sink sewer blockage can be treated with pipe dredging tools, dish soap, boiling water, if you can't dredge it yourself, you can ask a professional to deal with it. Many hardware stores sell household pipe dredging tools, which are composed of a stiffer steel wire loop structure, and before dredging the pipes, wear rubber gloves to protect your hands from getting oil or scratches. I hope mine can help you, and I wish you a happy life!

The main reason for the blockage of the dishwashing sink may be too much oil stains, and the sewage deposited in the sink is discharged out, and then the washing base is mixed with boiling water in equal amounts. Next, pour some dish soap into the drain hole of the sink and rinse slowly with the prepared mixture. The oil stains are broken down by the dish soap, and the sink drain is unclogged after multiple operations.

If the oil is blocked after solidifying, boil the water in a kettle, and then slowly pour it into the sink, the oil in the sink will slowly melt when heated, and it will not clog after melting.

If it is due to foreign body blockage, prepare a thin iron wire, insert it into the drain of the dishwashing sink, and remove the foreign body, do not use a large amount of water to flush, so as not to get the foreign object into the middle of the drain.

If the blockage is more serious, then do not deal with it yourself, so as not to damage the pipe, and ask a professional to dredge it.

The dust under the dishwashing sink and the old water channel blockage can be treated with pipe dredging tools, dish soap, boiling water, if you can't dredge it yourself, you can ask a professional to deal with it.

Many hardware stores sell household pipe dredging tools, which are composed of a stiffer steel wire loop structure, and before dredging the pipes, wear rubber gloves to protect the losers from getting oil or scratches on their hands.

Extend the pipe unclogging tool into the drain until it reaches the clogged place, the dishwashing sink is clogged mainly because the oil stains bind the debris together, you can pour in the appropriate amount of dish soap or pipe pass.

After waiting for 10-20 minutes, pour boiling water into the sewer, you can hear the sound of gas coming out of the originally blocked sewer, and then use the pipe dredging tool to deal with it, one person needs to hold the spring wire, and the other person shakes the handle.

The pipe dredging tool will gradually go down under the action of the handle, and it can also break all the debris in the sewer, and after the wire spring has all entered the sewer, continue to shake the handle to dredge the sewer.

The drain of the sink is often blocked, which is caused by leftovers entering the pipe, so in daily life, it is necessary to clean the leftovers in the bowls and plates before cleaning, which can effectively avoid the occurrence of sewer blockage.

How to solve the backwater in the kitchen drain?

1. When there is a waterproof problem in our kitchen sewer, don't panic first, in order to avoid the kitchen sewer from continuing to appear backwater, you can install a check valve in the sewer, the effect of this item is to only allow water to flow down, not to allow water to flow up, after installing the check valve, the kitchen will then reverse the water, the check valve will automatically close, and the water will naturally not come up.

2. The kitchen sewer is a pipe with a complex structure, if there is a backwater problem, the main reason is that it is blocked, at this time, we must first dredge the kitchen sewer, if it is not serious, you can go to some hot water or baking soda and vinegar, if it is serious, you can use a small dredge machine to dredge, and finally it is too serious, you can find a dredging team to dredge.

3. You can also install a waterproof bag in the waterproof layer of the kitchen, and after installing the waterproof package, you can avoid the phenomenon of backwater in the kitchen in the later stage.

4. Another way to reverse water in the kitchen is to install an independent water pipe system, because if there is water backflow in other homes in the whole building, then the whole building will be affected, so we install a water pipe independently for drainage, so that it will not be affected by other neighbors.

The method of backwater when the sink drain is blocked is as follows:

Can be solved with unclogging tools:The wire loop at the front end of the pipe dredging tool can be extended into the pipe to grab the blockage out, or shake the handle to break the debris, which can be dredged well, and there will be no backwater.

Can be solved with pipe unclogging agent:Pour dredging agent into the clogged pipe, and add some hot water, wait for a period of time, the blockage can be decomposed, and then flush, the blockage can be discharged, and there will be no backwater.

Can be solved with unclogging tools:The wire loop at the front end of the pipe dredging tool can be extended into the pipe to grab the blockage out, or shake the handle to break the debris, which can be dredged well, and there will be no backwater.

Can be solved with pipe unclogging agent:Pour dredging agent into the clogged pipe, and add some hot water, wait for a period of time, the blockage can be decomposed, and then flush, the blockage can be discharged, and there will be no backwater.

Can be solved with vinegar and baking soda:Both of these have a decontamination effect, and they can also be descaled after mixing, first pour boiling water into the sewer, then pour baking soda and vinegar respectively, wait for about four or five minutes, there will be a large number of bubbles, it will dissolve oil stains, food residues, etc., continue to flush the sewer with hot water, and it will be unobstructed quickly.

How to avoid sink drain clogging problems:The dishwashing sink sewer is blocked and backwater, mostly because some food residues or oil stains enter the pipe and adhere to the inner wall of the pipe, we can set up a filter screen at the mouth of the sewer to avoid residues from entering the sewer, for the plate with oil stains, you can wipe it off with a paper towel and then clean, or clean it with hot water, you can greatly avoid the blockage.

For families with good economic conditions, you can choose a kitchen garbage disposal device in the sewer location, which can crush vegetable leaves, bones and other residues, and the crushed substances will be naturally discharged with the water flow when they enter the sewer, and basically there will be no blockage and backwater.