Compared with ecological board and solid wood particle board, which decoration material is more heal

Eco-board and solid wood particle board.

Which decoration material is healthier and more environmentally friendly? When woodworking cabinets are hit, eco boards are one of the most recommended boards. Particleboard.

It is the plate used by large manufacturers, and it is also the most common plate when customized. And who of these two boards is more environmentally friendly and who is more suitable for cabinets? Eco-board is a wood-based board with finger-jointed board, multi-layer board, and particleboard as the core material, and then pasted cyanamide decorative board on the surface.

Wood-based panels, made of solid wood and miscellaneous wood, then glue is added at high temperatures. These two sheets are used to process glue, which is formaldehyde contamination.

Therefore, both types of plates contain formaldehyde.

<> difference is to pay attention to the amount of glue, from the perspective of low environmental protection, the more glue, the higher the environmental protection of the eco-board. But now that the technology is upgrading, formaldehyde-free glue has also come into being, and the amount of glue content is not the only conclusion whether it is environmentally friendly. The quality of the edge banding technology will also affect the release of harmful gases such as formaldehyde in the plate.

So the printing plate is environmentally friendly, we have to look at what kind of glue is used, the content of the glue and the process of the edge of the printing plate, not just because of the amount of glue used. The deformation resistance, load-bearing capacity, and nail holding force of the board are important factors that determine whether the furniture is durable.

Because eco-board is the core material of solid wood fingerboard or multi-layer board, the moisture content.

More difficult to control and easy to deform, but because of this, the grip of its load-bearing pegs.

It is better, and because a layer of veneer is pasted on the surface, it is not painted, and the waterproof and moisture-proof ability is better. Because the particleboard contains a large amount of glue, its deformation resistance and nail holding force are acceptable, and the bearing capacity is also medium, but its moisture resistance is weak, and the overall service life will be slightly weaker than that of the ecological board. In terms of comprehensive environmental protection, durability and quality, it accounts for the highest proportion and is the most cost-effective.

Compared with ordinary particleboard, the ecological board will be higher in terms of environmental protection, durability, and quality. But if you choose to customize, the ** of the grain board may be more expensive than that of ordinary manufacturers, and you can even buy the grade of solid wood relatively well. If it is a special particleboard, such as Osson board.

Hexiang boards, they may be more environmentally friendly, but they are also more durable because of different processing methods and different internal structures.

It must be that the ecological board is more environmentally friendly, and the formaldehyde content of the ecological board is relatively small, which can reduce the production of formaldehyde, can be used better, and the moisture resistance is also very good.

Personally, I think that the decoration material of the eco-board is healthier and more environmentally friendly, and the eco-board is also very practical, and the service life is also very long.

Personally, I think the eco-board should be healthier, the environmental protection ingredients are safer, and the ** is also more favorable, no peculiar smell, very good.

You can choose logs directly, such materials are relatively safe, there will be no glue and the like, which is more environmentally friendly.

The eco board is good.

Ordinary particle board is easy to get wet, but its water absorption expansion coefficient is small, and the deformation is small, so it can be better moisture-proof. The surface of the eco-board is flat, not easy to deform, and it has the characteristics of acid and alkali resistance, high temperature resistance and strong stability, making it more widely used in the field of home decoration and panel furniture. In the context of the increasingly difficult raw materials of solid wood, the materials of the group imitation granular collapse fiber board are extensive, and the branches and fast-growing wood can be broken and made, so it is economical and more competitive.

Ecological board, also known as paint-free board, has many kinds of colors and is easy to process, and can be used for cutting, drilling, sawing and forming processing.

Eco-boards are better than particle boards.

The specific analysis is as follows:

The most important advantage of the ecological board is environmental protection, it can realize the recycling of raw materials, make full use of resources, and contribute to the protection of the environment, at the same time, he can also be waterproof, anti-corrosion, insect-proof, anti-mildew, this board does not contain formaldehyde and other harmful gases.

Therefore, there is no need to worry about the impact on the body, the color of the ecological board can also be selected at will, and the color of the board can not fade for a long time without painting, and it is also very convenient to construct, so it has become a best choice in the decoration board.

Particle board is a variety of Tianbi sedan wood crushed into granules, after pressing into a board, with very good moisture-proof performance, the current overall cabinet material is mostly particle board, particle board has high density, good strength, nail holding force is better than MDF.

However, the flatness of the particle board is not as good as the MDF, and the arc and various shapes can not be made, and the production process of the particle board is different, and the quality is very different, and it is not easy to identify.

The difference between eco-board and particle board:

1. The material is different: the internal material of the ecological board is spliced by some solid wood, and its surface feels very smooth, not as rough as other boards, which is not a sedan because compared with other boards, it has a layer of surface processed by impregnated paper.

Therefore, when furniture is made from this kind of wood plank, there is no need to apply a layer of oil or paint to the surface after making it, because it already has a layer of lacquer.

Particle board, also known as particleboard, is mainly made of wood or other dry lignocellulosic materials, and is made of man-made boards made of wood or other lignocellulosic materials after applying adhesives under heat and pressure.

2. Different performance: the fire performance of the ecological board is relatively good, it can withstand high temperatures, and it is not easy to crack in a humid environment; Particle board has very strong stability and compression resistance, and it is not easy to deform.

Now the plate is indispensable in home decoration, there are many types of plates on the market, many people do not understand the advantages and disadvantages of the plate and do not know how to choose. At present, the most commonly used are ecological board and particle board, but how to choose between the two? Next, Xiaoye will talk about which is better, the ecological board or the particle board.

What is an eco board

Also known as paint-free board and melamine board, it is a decorative board made by putting paper of different colors or textures into the resin adhesive of the ecological board, and then drying it to the degree of curing, and laying it on the surface of particleboard, moisture-proof board, blockboard, etc., and making it by hot pressing.

What is particle board

It is a wood-based board made of wood or other lignocellulosic materials, which is made of fine wood fibers on both sides, long wood fibers sandwiched in the middle, and glued under heat and pressure after applying adhesives, which is a board produced by particleboard technology.

Comparison of eco-board and particle board.

Mainly from the performance, environmental protection, durability, the state section of the rush and other factors.

1. Performance.

The eco-board has the characteristics of high hardness, good wear resistance and heat resistance, and contains multi-layer solid wood, so the nail holding force and stability are strong, and the furniture is not easy to deform and crack. Its surface is smooth and flat, and its color is bright. The eco-board has a strong corrosion resistance effect and has a certain resistance to general corrosive liquids.

Particle board has the characteristics of high density and strong compression resistance, retains the essence of more natural wood, and the decorative effect is relatively better. It has good machinability and simple installation, but it is mainly made of wood chips, and the nail holding force is very weak, which is prone to deformation and cracking, and the service life is relatively short.

2. Environmental protection perspective.

The environmental performance of the eco-board stove is better than that of the particle board. Ecological paint-free board from a literal point of view is to avoid the link of painting, so environmental protection is much better, and house decoration environmental protection is the most concerned aspect, in the decoration will be exposed to paint, are to use less paint. Then, it is because of this that many people choose ecological boards, which are highly sought after by owners and friends.

3. Durability.

It's a little better to choose a particle board. The advantage of particle board is that no matter how small the piece is cut, it can do a good job of veneering and edge banding, but if the edge sealing is not good, the content of formaldehyde released is high.

4, ** aspects.

The eco-board will be more expensive than the particle board, but it also depends on the specific brand, product technology, etc. Theoretically, the cost of eco-board is indeed higher than the cost of particle board. In the board less than 300 yuan, the particle board is basically the largest, and the cheapest ecological board is close to 300, which is relatively cost-effective, but the environmental protection effect is indeed better than that of particle board.

To sum up, combined with the respective advantages and disadvantages of ecological board and particle board, each board has irreplaceable advantages and disadvantages, as for the question of which is better, it is necessary to consider it comprehensively according to the actual situation, which is the best.

Compared with <> ecological board and solid wood particle board, which decoration material is more healthy and environmentally friendly? When we buy plates, we can't use the way of plates to evaluate which environmental protection is compared to plates, because the environmental protection of materials is related to its formaldehyde content, that is to say, the same plate will exceed the formaldehyde standard. Eco Board:

Ecological board is a decoration company to make cabinets commonly used plates, the decoration company on the market to make most of the cabinets are made of ecological board or multi-layer board, this kind of board is easy to use, the weight is clear, the use of glue is relatively less, the nail holding is good, and the best is also affordable, so it is the darling of the decoration company. Solid wood particle board: solid wood particle board is pressed with sawdust and glue, the nail holding force of this board is not good, so the decoration company will not use this kind of board, and the manufacturers of wardrobes are different, their combination is not nailed, it is a combination of embedded buckles, so the nail holding force has no effect on them, and the deformation of the particle board will be a little better than the ecological board, and the use of particle board to make a wardrobe is also the standard of the entire wardrobe manufacturer.

The finishing layer of the ecological board and the solid wood particles is finished with melamine board, but the difference between the inner core. So how do we measure when we look at the environmental protection of the plate, the easiest thing for the owner is to look at the environmental protection level, the national standard is E1, E2 level, the European standard has E0 level, but whether there is really a European standard E0 is unknown, many of the imported plates are basically produced in China and then OEM, so we don't need to waste this money, or choose E1 is enough, of course, we are really not at ease, Then take this plate sample to the testing agency to test the actual formaldehyde content. For the air pollutant detection of the whole house after the decoration, if the formaldehyde content exceeds the cube, then it is necessary to carry out formaldehyde treatment, which can be combined with photocatalyst and activated carbon.

Eco-boards are more environmentally friendly. The panels are made of fir wood in the middle, and then the sides are decorated with decorative panels. It's relatively safe.

The eco-board will be healthier and more environmentally friendly. There is no glue in this kind of board, so there is no formaldehyde and no unpleasant smell.

When renovating a new house, the hard renovation is done as a whole, followed by the soft decoration. Soft furnishings are cabinets of various materials. As long as soft furnishing is mentioned, panels of different materials are used.

Of course, solid wood and plank are two different concepts. Pure solid wood is a material made from a whole piece of wood. Plates, on the other hand, are processed and synthesized materials.

Eco-board is one of the panels, which is mainly used for soft decoration. All wardrobes are custom-made. You should be familiar with solid wood particleboard.

As long as you have renovation experience, or your relatives and friends have just renovated a new house, you will mention particleboard. Now the whole house customization of the home is more popular, that is, solid wood particleboard. As long as you choose a whole-house custom wardrobe, regardless of whether the manufacturer has a showroom or a board supplier, you will recommend solid wood particleboard, especially the big brand whole-house custom wardrobe, focusing on solid wood particleboard for full-floor customization.

The décor is clear. The custom wardrobes throughout the house were good. I can't decide to choose the board.

I don't know enough about the board of directors, and I don't feel comfortable about environmental protection. It's normal to have this kind of thought. The eco-board is melamine, which is known as the all-aromatic fir ecological unpainted board.

It has good corrosion resistance and has good environmental performance. During use, it will not release formaldehyde and benzene that are harmful to the human body, and the safety performance is high. Particleboard is a kind of particleboard, and it is also a new type of high-grade environmentally friendly material.

It is a type of wood-based panel made from wood or other really broken materials, bonded with adhesives. Under the action of heat and pressure, the surface of the particleboard is particularly smooth and also easy to shape. It has a high degree of aesthetics, good sound insulation, mildew resistance, heat preservation and wear resistance, is not easy to wear, strong nail holding force, and is very environmentally friendly.

It is impossible to generalize. Good particleboard is more durable and environmentally friendly than eco-boards and multi-layer solid wood. The environmental rating of cheap multi-layer solid wood cannot reach E1, and the environmental protection level of high-quality particleboard can reach E0.

It also depends on the processing technology. Formaldehyde emission can reach 0. The cabinets are made by on-site carpenters and the edges are glued with buckles.

Even if you give you an e0 board, you can't make an eco-friendly cabinet. Currently, the best particleboard on the market has a better nail holding power than multi-layer solid wood. Therefore, whether it is particleboard, multi-layer solid wood or eco-board, it all depends on the quality and processing technology of the board.