How do you weave wind chimes out of ribbon paper?

In a word, it is still necessary to use people's ingenuity and talent.

Material: a roll of ribbon [1 cm wide].

Scissors. Production process:

1.Cut out 4 ribbons [30 cm long] and fold them in half at 11:19.

Material: Ribbon roll [width 1 cm].

Process:1Cut off 4 ribbons [1 cm long].

2.The four ribbons folded in half are threaded into [long at the bottom] and finally tightened after wearing, like"+"Shape.

3.will"+"The 4 long sides of the shape are folded in half [long original upward, folded in half and then down] and tightened.

4.Take the long 1 countryside fold out 1 triangle, and then fold up 1 triangle, with the above method, the remaining 3 ribbons are also folded out of 2 triangles, check it into the edge close to the 2nd triangle, and tighten, so that the two triangles stand upright in the "+" shape, and connect the remaining 3 ribbons in turn.

5.Thread the 4 long ribbons you just inserted into 1 square and thread the remaining 3 ribbons in the same way. The shape is like a " shape, and 18 such triangles can be folded.

6.First take two "" shapes, connect the two ribbons on both sides together, and then take 6 "" shapes in turn to form a ring, and then press down the middle part of the two "" shapes in the upper part of the ring, and press down the symmetrical part below, which can probably form a "peach heart" shape.

7.Take 2 pcs"Peach heart", and then the symmetrical position of its upper part is connected, and it is connected in the other part.

8.Take 1 more " ", connect it at the center, and will"Peach heart"Turn over, use the same method, connect 3 " ", take another 2 " " shapes, 16 sides are connected, probably can form a spherical shape, do 2 can be.

9.Then use a thin wire to string the round ball, "peach heart" shape, ** in the middle can be strung with some colorful ribbons made of pentagonal shapes, zongzi, etc., (if possible, you can hang a few small wind chimes on it, the effect is very good). It's just not the kind you want, but this kind of ribbon wind chimes is also beautiful.

Very complicated, brass wind chimes.

If you live in a place that lacks the scent of nature's birds, you can make a string of romantic wind chimes and hang it on the lintel. When looking for materials to make wind chimes in nature, whether traditional or modern, rustic or smart, choose light green and brown materials are the best combination. If the wind chimes are hung outdoors, the copper used to make the wind chimes should have a striking blue-green patina.

Materials: Copper pipes, pipe wrenches, small hacksaws, electric hand drills, wire cutting blades, galvanized steel wires, glass beads, leather strips or rubber bands.

Production method: 1. The main skill is to cut off the copper pipe and drill holes on it. If you want to realize your own design, you must first draw a sketch of the wind chime on the drawing, and modify the design drawing while making the wind chime, so that it can be perfected and become a model for making wind chimes in the future.

2. Use a pipe wrench or hacksaw to cut the long copper pipe into 7 copper pipes of different lengths. A slight difference in the length of the brass produces several different tones (longer brass is less sounding). Four small holes were drilled at the upper and lower ends of the longest copper pipe, the two at the upper end were opposite to the two at the lower end, and the other six copper pipes were only drilled with two opposite small holes at one end.

3. Cut a section of electroplated steel wire with pliers, the length is the circumference of the designed steel ring, bend the steel wire into a steel ring, and fold the excess part into a second circle. Thread six pairs of flat glass beads through the steel rings and trim the steel rings into rings so that the glass beads can roll on them. Tie a knot at the junction of the glass beads and the ring, tie a strip of leather, and use a crochet needle to weave a blanket to thread the strip of leather into the ring between the two pairs of beads.

4. Cut a short strip of leather, tie a knot after passing one end through the two holes of a copper pipe, and tie the other end between a pair of glass beads on the ring to connect the copper pipe with the ring. Continue to use the needle to thread the strip of leather between the other five beads, while tying the other five copper tubes. Thread one end of the strip through a pair of glass beads to make the hanging end of the wind chime, and tie the longest copper pipe to the other end.

Twist the strip of six copper pipes and the strip of the longest copper pipe together, hang it, and you're done.

Unique wind chimes.

Materials: medicine bottles, electro-optical paper, cement, cardboard pieces, needles, threads.

How to make it: 1 You have to find a way to find 9 small medicine bottles, then fill them with water of various colors, and then thread a thread on each bottle cap;

2. Cut a disc out of cardboard, thread it through the thread in the middle, and then fix the thread of the medicine bottle around the disc;

3. Use cement and electric paper to make all kinds of beautiful patterns and stick them on the bottle.

Unique wind chimes.

Materials: medicine bottles, electro-optical paper, cement, cardboard pieces, needles, threads.

How to make it: 1 You have to find a way to find 9 small medicine bottles, then fill them with water of various colors, and then thread a thread on each bottle cap;

2. Cut a disc out of cardboard, thread it through the thread in the middle, and then fix the thread of the medicine bottle around the disc;

3. Use cement and electric paper to make all kinds of beautiful patterns and stick them on the bottle.

Gotcha: Leave the rubber cap on the glass bottle.

Materials: iron wire, plastic ribbons, needles, bottles, caps, colored paper, bells, colored beads.

Start by forming a loop of barbed wire, and then choose how many bottles to use according to the size of the circle. Wash the bottles, peel off the labels on them, and cut them into the bottles with colored paper of various colors to decorate them.

Split the plastic ribbon into filaments, choose the appropriate length and wear it with a needle on the rubber cover, and the end should be netted to prevent the filament from falling off, and then put on beautiful colored beads and bells, and then buckle the lid to the bottle. Do this a good chain of wind chimes. Wear all the other bottles in the same way, with each chain about five centimeters longer than the other.

It is fixed to the wire in turn, so that it has the effect of spiraling down. Then wrap the wire in colored paper to make it beautiful.

The wind chimes are ready!

I don't know if it's detailed, it depends on your understanding, you can change things like colored paper and colored beads at will, the main purpose is to look better. It's up to you!

Wear the ribbon on the perforated plate.

There are too many diagrams to give you a link.

This needs to depend on the complexity of your wind chimes, if it is simple, the amount is very small, if it is complex, it may take several volumes, generally when designing, consider it, prepare a volume is about the same.

Recommended production steps.

How to make ribbon handmade wind chimes? What materials are needed? What is the process? Read this article with questions!

Ingredients:

A roll of colored ribbon [1 cm wide], scissors.

Production process:

1.Cut out 4 colored ribbons [30 cm long] and fold them in half at 11:19.

2.After folding in half, the 4 colored ribbons are threaded into [long below] and finally tightened after wearing, like"+"Shape.

3.will"+"The shape is folded in half with 4 long edges [long up and folded in half and down] and tightened.

4.Take the long 1 and fold down to make 1 triangle, then fold up to make 1 triangle, with the above method, the remaining 3 colored ribbons are also folded out of 2 triangles, insert it close to the edge of the 2nd triangle, and tighten, make the two triangles stand upright in the "+" shape, and connect the remaining 3 colored ribbons in turn.

5.Thread the 4 long colored ribbons you just inserted into 1 square and the remaining 3 colored ribbons in the same way. The shape is like a " shape, just fold out 18 triangles like this.

6.First take two "" shapes, connect two colored ribbons on both sides together, and then take 6 "" shapes in turn to connect them to form a ring, and then the upper part of the ring to get two "" shapes in the middle of the shape to press down, and the symmetrical part below is also pressed down, roughly can form a "peach heart" shape.

7.Take 2 pcs"Peach heart", which are connected in symmetrical positions in the upper part of it, and connected in their corresponding parts.

8.Take 1 more " ", connect it at the center, and will"Peach heart"Turn over, use the same method, connect 3 "" ", take another 2 "" shapes, 16 edges are connected, roughly can form a spherical shape, just do 2.

9.Then use a thin wire to string the round ball, "peach heart" shape, ** the middle part of the string can be made of colored ribbons to make a pentagonal shape, zongzi, etc., (if you have the opportunity, you can hang a few small wind chimes on it, the effect is very good).