Is it normal for the large glass to shake at the middle point when pressed?

If the thickness of the glass does not exceed eight millimeters, and the area is relatively large, you press the middle, and it has a slight shaking, which is normal, which is a physical phenomenon caused by the elasticity of the glass itself.

The balcony large glass pine shake can take the following methods:

1. If the window is moved, the window sash and the window sash are still shaking left and right after being locked, and the lock hook is adjusted, it may be that the lock hook is too long.

2. Change the size to a smaller size, or make a window. Casement windows are more expensive, and the sealing and sound insulation are better than those of sliding windows.

3. The floor-to-ceiling window glass will shake when pressed by hand, indicating that there is a problem with the fixing method of the glass, the thickness of the glass, or the size of the adhesive strip, and the installer must be contacted to repair it. You should know that the installed floor-to-ceiling window glass will not shake.

4. In the process of use, if there is a small problem, you can choose to drip lubricating oil on the position of the hinge to prevent jamming. And the daily use of floor-to-ceiling windows is to ensure that the action is as light as possible, and cannot be hit with heavy objects.

Extended information: Construction plan and precautions for sealing balconies:

1. Window sealing scheme.

Before sealing the balcony, be sure to find the property to verify the window sealing plan. If the balcony of the home is facing the main road, the property has strict requirements for sealing the windows, so as to avoid unnecessary trouble in the later stage, this step must be done.

2. Window sealing time.

Generally, after the wall is renovated, you can arrange for the merchant to come to measure. The construction time of window sealing and the handover of the bricklayer are carried out to avoid the conflict between balcony tiling and window sealing.

3. Seal the window frame first, and then seal the glass.

The merchant wants to save trouble, and the window frame and glass are installed at one time. Later, during construction, if the glass is dirty, you should wait for the putty to be scraped before installing the glass and screens. Sealing the window frame first, and then sealing the glass, can leave a lot of things for you to clean the wasteland in the later stage.

4. Knock off the insulation layer.

Remember to knock off the insulation in the window frame area and measure the window size. There is an insulation layer, the window frame is not firmly fixed, and it is easy to crack and leak water in the later stage.

5. Low wall waterproofing.

Some balconies have a small low wall, remember to paint this wall with waterproofing to prevent rainwater from seeping into the room along the wall.

6. Reserve maintenance space.

If you put a laundry cabinet on the balcony, try not to stick to the glass as much as possible, and separate it to accommodate your hands to reach in. It is convenient for later maintenance, and sometimes the window leakage needs to be re-glued. The finished laundry cabinet can be moved directly, and the customized or brick-built laundry cabinet cannot be moved in the later stage, so it is necessary to reserve this maintenance space.

7. Do not dismantle the guardrail.

Balconies come with their own guardrails, remember to check when accepting the new house, whether the installation is reliable, whether there is rust, etc., if there is a problem, you can ask the developer to replace. If the balcony is sealed in the later stage, it is not recommended to remove this guardrail if there are no special requirements. No matter how strong the tempered glass is, the protective effect is not as good as the guardrail.

Try to match the height of the window frame with the guardrail, so that it can be hidden.

It is normal for the middle point of the large glass to shake, and there is no support point in the middle of a large area of the middle thing, so it is normal to press and shake a little.

This situation is not normal, if the glass is shaken by hand, it means that there is a problem with the fixing method of the glass, the thickness of the glass or the size of the adhesive strip, and the installer must be contacted to repair it, so that it can be safe.

Abnormal. If the glass shakes when pressed in the middle, it proves that it is not securely installed. You need to find someone to reinstall it, otherwise something unexpected will happen.

Large glass pressed to the midpoint. Shake. This phenomenon is not normal, indicating glass. The installation is uneven, if encountered. Windy day. May cause glass to break. So install the glass as early as possible. so as not to damage the glass.

Because the area is too large, it will shake, which is normal, and generally the insulating glass will shake, mainly because the glass is more than the frame. It can effectively absorb water in the air.

If it is a large glass, press the middle, and the surrounding force will be unbalanced, and there will be shaking, which is a normal phenomenon.

Obviously not normal. The strength of the visual inspection of the glass thickness is not enough, especially the thickness and strength of the insulating glass outer sheet is not enough, and the wind pressure resistance is obviously insufficient.

The middle point of the large glass is shaken, this is normal, because the middle point is the large glass, the weakest place in the middle of the large glass.

Abnormal, if the window is moved, the window sash and the window sash are locked and still shake left and right, adjust the lock hook, it may be that the lock hook is too long.

It can be changed to a smaller size, or a window can be made. Casement windows are more expensive, and the sealing and sound insulation are better than those of sliding windows.

Hello! I think it's still not normal, sometimes you still can't shake like this, and the sealing performance is definitely not very good.

It is very abnormal to press the glass to shake, first of all, it may be that the fixing point of the glass is not fixed, and secondly, the sealing effect of the glass is not good, and it may also be caused by the poor material of the glass.

The glass is shaking, mainly because the glass is smaller than the frame and is not installed firmly, so it will shake after the wind blows, and the glass will fall off in serious cases, which must be dealt with in time.

Because the higher the house is built, even a small shaking of the ground will cause a large shaking of the top, and the higher the building, the greater the shaking amplitude. The building has strict calculations in terms of wind load and will not be a problem.

A rigid body is an object that does not change in shape and size, and the relative position of the points inside does not change, during motion and after being subjected to force. Absolute rigid bodies do not actually exist, but are only an ideal model, because any object is more or less deformed after being subjected to force, and if the degree of deformation is extremely small relative to the geometric dimensions of the object itself, the deformation is negligible when studying the motion of the object. As you said, the shaking does not affect normal use.

If the large glass is a little shaky in the middle, it should be abnormal, right? If the shaking is too large and the entire glass is shattered, it will be a big loss.

The middle part of the large glass of my balcony also shakes slightly, which should be a normal situation.

Because the 5 centimeter glass is too thin, the area of a single piece of glass is too large, there will be deformation, and the flatness of the insulating glass is not good, and it is easy to bulge, so it will shake when you press it by hand, if it is tempered glass, it will be safer, if it is not tempered, it is too dangerous, and it may be broken at any time, so you must pay attention to safety.

1.It is necessary to replace a relatively large insulating glass in time.

Generally, the insulating glass shakes, mainly because the glass is smaller than the frame and is not installed firmly, so there will be shaking after the wind blows, and if the situation is serious, the glass may fall off, which must be dealt with in time to avoid unnecessary losses.

2.Before buying insulating glass, you need to confirm that the insulating glass is tightly sealed.

3.If the quality of the insulating glass purchased is relatively poor, the black PVC styrofoam used is basically used.

Then the sealing effect is very poor, which seriously affects the later use.

4.The insulating glass sealed with sealing strips is of relatively good quality.

5.If it is the best insulating glass, then between the two glasses, an aluminum spacer will be installed, and there will be more air holes on the aluminum spacer, which can effectively absorb the moisture in the air.

6.And in winter, the insulating glass of *** will not produce fog, anyway, the quality is poor, there will be fog.

7.Once the insulating glass has been installed, it is time to test the acoustic properties it provides.

8.If the sound insulation performance is very good, then its quality must be good, and the use time is relatively long.

9.The sound insulation effect of insulating glass with poor quality is relatively poor, and later use will bring unnecessary trouble.