Every time there is a strong wind, the aluminum alloy window shakes very badly, how to deal with it?

The recent drop in temperature, coupled with the occasional roar of the cool breeze, especially at night, is really scary when the sound of the whirring breeze blowing through the cracks in the windows that are not sealed. Even if the air conditioning and heating are turned on at home, it will quickly dissipate heat, which is very energy-saving and affects the quality of life at home.

<>First of all, single-layer sliding windows.

Inevitable air leakage, which is the inevitable ,,, solution of the push-pull structure, double-layered. Secondly, the inner layer is made of plastic steel.

Double glazing - for added insulation. Two-layer sliding window frames, must be used to weaken the wind, if it doesn't work, tape, this will not be, then you will freeze if there is air leakage, it is very uncomfortable, with the increase of floors and the probability of air leakage is getting bigger and bigger. So how do we get the windows right?

For example, now a friend asks such a question: how to deal with air leakage in window frames? To write a maintenance report, the regular safety meeting should be emphasized.

Of course, if it's a private home, that's a different story. You can find a professional maintenance worker or the old man next door, and the cost will be paid by yourself. If it is an illegal building.

Yes, all reports and begging words are all shattered!

Re-whip the styrofoam.

Hit the curtain wall structural adhesive.

Dealing with waterproofing can basically solve the problem. If it belongs to the second case, it will be more tricky, that is to say, the glue can be re-played, and the problem of window defects can only be completely solved by replacing the window, which is another expense! The sealing strip can be replaced and EPDM adhesive can be used.

It is better to find a window worker to replace it. If it is filled with styrofoam, you also need to find a worker to operate, after the styrofoam is cured, you can pinch it yourself to see, and the quality of the pinching is better. The above is the relevant content of the Mawang Encyclopedia about what to do if the high-rise window leaks.

In short, because window air leakage is not only a problem of air permeability and rainwater, but also reduced warmth and sound insulation, once the window leaks, it should be solved in time. I hope this article can help you. Pay more attention to observation, first look at the indoor window sill to see if there is a watermark, it is best to see it when it rains, it is definitely the window leakage, or the window frame is not full of ash.

If there is a large gap between the window and the window frame, the best way is to change the size of the window, you can find the original installer to see if you can make the window frame bigger, or fill the gap with a sealing strip, so that the gap can be solved, and there will be no trouble with shaking sound in the later stage.

I think that every time there is a strong wind, the aluminum alloy window is particularly shaking, we should repair it in time, you can find the relevant master to take a look, and reinforce and install it.

When there are embedded iron parts on the wall, the iron feet of aluminum alloy doors and windows can be directly welded with the embedded iron parts on the wall, and the welding place needs to be treated with anti-rust.

When there are no embedded iron parts on the wall, the iron feet of aluminum alloy doors and windows can be fixed to the wall with metal expansion bolts or plastic expansion bolts.

The sound of aluminum alloy windows blowing and shaking is basically the resonance sound of the window, and there are two main reasons: first, the window is loose; Second, there is a lack of oil in hardware. Loose windows are usually due to a problem with the seal; Loose locking screws, falling glass glue, aging sealing strips, and poor sealing of aluminum alloy doors and windows will cause the windows to shake and produce abnormal noises.

Fittings need to be replaced, or cardboard can be used to temporarily fix window looseness. If it is just a lack of oil in the hardware, it can be maintained with lubricating oil in time. 1. Loose window locking screws Loose or deformed window locking screws will shake the window in windy weather and produce abnormal noise.

Solution: Tighten the loose screws, or replace the lock. You can also put a piece of cardboard directly under the window, and then gently shake the window to check, and the window can be pushed up without shaking.

2. Glass glue falling After a long time, the glass glue will fall, age, crack and other phenomena, resulting in loosening of the glass. Most of the reason is that the aluminum alloy door and window assembly manufacturers did not play the best glass glue or forgot to play glass glue in the construction process, resulting in air leakage between the profile window frame and the glass. You can hold the window frame with one hand, and wipe the glass from the outside and inside with the other hand, and if it is loose, it will "rattle".

Solution: Remove the aging glass glue, clean the gap between the glass and the window frame, and then re-apply the glass glue around the glass. 3. Aging of the sealing strip The aging of the sealing strip will also lead to the loosening of the window, which is easy to be blown by the wind and produce abnormal noise.

The main reason is that the service life of the sealing strip is much shorter than that of ordinary times after long-term exposure to wind and sun. Solution: Replace the sealing strip and you're good to go.

In case of emergency, the window can be temporarily fixed with adhesive sealing strip or transparent glue to prevent it from leaking and shaking. 4. Aluminum alloy doors and windows are not tightly closed There are two situations in which aluminum alloy doors and windows are not tightly closed: one is the slippage of the lock point, resulting in the door and window not being tightly closed; The second is that the window falls, making it impossible to close the window.

Solution: Both of these situations are caused by hardware accessories, replace the hardware, if the door and window are closed and sealed when the tight misfit, it is recommended to replace as soon as possible. In addition, the gap around the installation is too small, and there is not enough space for thermal expansion and contraction of the material, which will also lead to gaps in the window, air leakage and shaking.

In this case, it is necessary to close it at the time of installation, and it is best to ask a professional master to install the windows.

Look at whether it is the sound of the wind or the resonance of the window, it is generally not well sealed. The gap between the frame and the glass frame is too large, just stick a wool strip.

The seal is not done, and I will find the person who installed it to sort it out for you.

Poor sealing is just not installed.

There is a problem with the size, and the dust strip is not installed.

You can choose to seal the gaps with kraft paper, paste or plastic tape. You can also choose to cover the entire window with plastic sheeting indoors and tape the perimeter to the wall.

Be careful to regularly check the window for cracks, fill it with foaming agent if necessary, and then apply a layer of cement. It is better to find a professional to carry out the construction. If the glass is loose, there will be a gap, and it must be handled by a professional.

Check the screws on the windows, and if possible, re-tighten the screws with signs of loosening. If the glass window has been used for a long time, the glue that sticks to the glass will shrink, and there will be a gap between the glass and the frame. You can use glue to apply it to the crevices around the glass.

Precautions. Before using nanoglue, it is necessary to remove dust and garbage from the cracks of the windows. Dirt in the window frame will increase the convection between the window and the outside air, which can cause air leakage, so it should be cleaned up in time.

When it is found that the doors and windows are opened inflexibly or other abnormal conditions in the process of use, the reason should be found in time, and if the customer can not eliminate the fault, you can contact the door and window manufacturer and the first business, so that the fault can be eliminated in time.

1. Check the windows. First of all, you can check whether the windows are closed tightly, because when the wind is strong, the windows may not be closed tightly, which may cause shaking. Secondly, if the window still shakes after closing it, you can check whether there are cracks in the window, and if there are cracks, replace the window in time to avoid harm.

2. Install a windshield device. When the wind level is particularly high, in order to prevent the windows from shaking, we can install wind shields, and install sound insulation materials and thick curtains to block them. Prevents indoor and outdoor air convection that can cause window glass breakage.

3. Replace the window material. Due to the long service life of some windows, the material of the window is aging, and when there is strong wind outside, it will shake violently, at this time, you can consider replacing the hard window material.

4. The glass is loose.

The glue of the glass attached to the doors and windows that have been used for a long time shrinks, and there is a gap between the glass and the frame. It is also possible that the sealing measures between the glass and the window frame are not very good. Hold on to the window frame and wipe the glass repeatedly with your hands, and you can feel whether the glass is loose by wiping both inside and out.

If you have the tools and patience, you can apply glue yourself in the crevices around the glass.

5. It may be that the screws are loose.

If possible, check the screws on the doors and windows regularly, and re-tighten the screws with loose signs if possible.

If there is always a strange noise, it may be because the window is not closed tightly, just need to close it tightly or be supported by something, or it may be because the window is damaged and people can fix it.

It is because the fixation of the aluminum hinged window is not very stable, so it will cause such a sound, as long as the aluminum hinged window is fixed again when the weather is good.

First of all, we have to check whether the window lock screw is loose, the window lock screw is loose, or is there any deformation? Second, it seems that the glass corner has been falling for a long time, and the glass glue will fall and age.

You can seal all the corners of the window with adhesive tape to reduce the noise.

The windows chosen by many families are made of aluminum alloy, which has a wide range of uses, and has many properties, such as its strong stability, which is not easy to corrode after a long time, and the waterproof effect is also very good. But how to deal with the sound of the aluminum alloy window blowing in the wind? Next, let this site answer for you.

1. If there is a large gap between the window and the window frame, the best way is to change the size of the window, you can find the original installer to see if you can make the window frame bigger, or fill the gap with a sealing strip, so that the problem of the gap can be solved, and there will be no trouble with shaking sound in the later stage.

2. If the window frame is loose, you need to fix the window frame with screws, and re-apply it with glass glue at the edge of it, so as to achieve sealing, and at the same time be able to play a waterproof effect, but also pay attention to the fact that the doors and windows must not be stuck when applying glass glue.

Kiss is a pleasure to answer for you, my answer is <> below

If it is because there is a large gap between the window and the window digging frame, the best way is to change the size of the window, you can find the original installer to see if you can make the window frame bigger, or fill the gap with a sealing strip, so that the problem of the gap can be solved, and there will be no trouble with shaking sound in the later stage. 2.If it is due to the loosening of the window frame, you need to fix the window frame with screws, and re-apply it with glass glue at the edge, so as to make He Sanyan to the sealing, and at the same time it can also play a waterproof effect, but also pay attention to the glass glue when you must not jam the doors and windows.

There are two reasons why the gap between the window and the window frame is too large.

The solution is to increase the size of the window door. For this reason, you can go directly to the person who installed it.

The second reason: loose window frames.

Solution: Re-fix the aluminum alloy window frame with a wall screw, and then hit glass glue on the edge of the crab with the wall to make it waterproof. Be careful not to jam the window door when fixing.