-
1. The central lock of the door is open. When the door can't be opened, we can first unlock it with the car key, and then lock it, repeat twice, and then find the central lock button on the left front door trim panel of the main cab, press the unlock button, so that we can try the door that can't be opened again, and see if it can be opened! This is one of the reasons why the car door won't open.
2. The child lock is on. When we close the car door, we must remember to see if the child lock is closed, if it can't be opened, we need to take out the word change cone, and screw the child lock to the closed state, so it's good.
3. The cable of the door lock block is out of order. After this reason appears, we can't open the door from the car, because if the cable fails, then it will directly affect the lock block that can't be opened.
4. The door hinge and lock post are deformed. When the door is subjected to a certain external force, it may cause the door hinge and lock post to deform, which is also one of the reasons why the door cannot be opened.
5. The door limiter is out of order. After this kind of problem, we are very laborious when opening the door, or it can't be opened at all, the solution is to replace the door limiter, so that the door can open and close smoothly.
6. The door is frozen. The weather in winter is relatively cold, it is easy to freeze the door, and some vehicle door locks are frozen, after this problem, the door can not be opened, so we need to drive the vehicle to the sun, or use the baking lamp to bake the door that cannot be opened.
-
Are you locking the car when the headlights or other electrical appliances are not turned off, the power is exhausted, find a car, use Jianglong to power your car, open the door, let the other party's vehicle on the car and slightly refuel, you take a taxi, or it is not easy to get the other party's car out of power, first connect your battery, then connect the negative pole, and then go to the other party's battery, but also first connect the positive pole, and then connect the negative pole, or just in case.
-
It is estimated that the lock block is frozen after the car wash or snow, there is no other way but to go into the heating warehouse to slow down, I hope mine will be helpful to you!
-
1. Go home to pick up the keys or find a family member to send a spare key, which is the way to insurance and minimize losses.
2. Open the lock company to open the lock company, and you need to prepare valid documents such as ID card, driver's license, and driving license to find the lock company.
3. Unlock through the high-tech configuration in the car, such as OnStar and the like, you can remotely unlock the lock through the mobile phone remote control or call the customer service center.
4. Under the premise that the three methods above the state base cannot be opened, the only way to open the car window is to smash it open.
-
I don't know if you have ever encountered the situation that you can't open the door whether you use a remote control key or a Bluetooth key, or a mechanical key, if the owner encounters something more urgent, it is very annoying. There are many reasons for this problem, and how to solve it in ordinary times, let's explain it next.
How to solve the problem that the car door can't be opened:
1. After washing the car in winter, if the water remaining in the handlebar, lock, and door gap is not wiped dry. If you park for too long, there will be ice, so the owner will naturally not be able to open the door. The owner can use a baking lamp or a hot object to bake it, and the ice will be able to open the door when the ice melts;
2. If the door lock used by the vehicle is an electronic lock, then the battery will not be able to open the door if there is no power. The owner needs to replenish the battery to open it;
3. If the door lock block cable fails, the owner will not only be unable to open the door outside the car, but also unable to open it in the car. If the cable fails, the door lock block will not be opened, and the door will not be opened.
4. If the door limiter fails, it will be very laborious when the door is opened, and if the fault is more serious, then the door will not be opened at all. The owner only needs to go to the 4S shop or repair shop to replace the new door stopper.
If you want to open the door immediately, you can try to ask a friend to help. If one person pushes the door outward inside the car, and one person pulls the door outside the car, it may be possible to open the door. You can also lower the window of the door and remove the sealant of the window, so that the gap in the glass will be larger.
You can use the wire to bend it into a hook, and then pull the connection between the cable and the locking machine, and it is possible to unlock the door.
-
Landlord, I've already encountered this problem. It's the lock in the main driver that is broken, you go to the 4S store to change it, I've changed it, it's a little expensive. This situation is only encountered in winter, not in summer.
Generally, there is an indicator light on the key fob, and when we press a certain button, this indicator light will flash. If the indicator does not flash, it means that the key fob is faulty, the battery may be dead, or there is a problem with the remote control itself, at this time you need to change the battery or change the key; If you change a key, still can't open the door, you see if the car's double flashing lights are flashing when pressing the remote control unlock key, if there is no flashing, the car has not received the unlocking signal, if it flashes, it means that the car has received the unlocking signal, and if it still does not unlock, you need to check the car itself. >>>More
You can use the battery of other vehicles to power up, and you can open the door after the car is powered on. >>>More
Because the pressure inside and outside the car is the same, the door cannot be opened.
It may be that the outer handle is not good. >>>More
The mechanical key can't open the door:
1. The operation is not right, and the direction of screwing the key is wrong, and in most cases the direction of screwing the key is clockwise. >>>More