Animal farming and machine farming, machine farming has obvious advantages, but why do some old farm

Updated on Three rural 2024-07-21
9 answers
  1. Anonymous users2024-02-13

    Old farmers have become accustomed to this way of planting, and it costs a lot of money to buy machinery, and farmers are reluctant to invest.

  2. Anonymous users2024-02-12

    It's easy and easy to do, and it's very reassuring. Able to plow the land very well.

  3. Anonymous users2024-02-11

    Because it has formed a habit, some of them will not be used, and some of them will only be planted relatively little, so there is no need to use machine farming.

  4. Anonymous users2024-02-10

    But in more remote places, young people are working outside, and there are only older people at home, and they can't bear to let the farmland be desolate at will. Animal farming, which can be used by any old man, is simple and reassuring, and is deeper than machine farming, more edge-to-edge, and stronger planting; Livestock farming should have livestock, raising livestock can be used for application, easier to breed and easy to increase the annual income of the family, not to mention, such a family farming is not much, so to speak, the benefits of using cattle to cultivate the land are deep:

    Oxen are used to plough the land, generally two oxen pull a plough, and the depth of the agricultural land is above 25. After deep ploughing, it is suitable for the growth and development of grain crops, because it locks water, solidifies the soil, and the soil layer is conducive to the fluidity of nutrients and other loose soil layers: when using cattle to plough the land, the cattle walk relatively slowly, and the plough can evenly disperse the scraped soil.

    That's what the big tractor double plough can't do: because the big tractor moves fast, the scraped soil turns out of the furrow directly opposite the furrow, and the soil layer is still hard and <>

    It is not conducive to the growth and development of crops, but it is beneficial to fine harrowing: using cattle to plough the land can achieve the effect of deep ploughing and fine harrowing. After the agricultural land is dried, when ploughing, the first two oxen pull the empty rake; Later, slowly add load to the rake; In the end, people stand on the rake several times and rake finely, so as to achieve the effect that the soil layer is scattered and not false.

    That's what a tractor can't do after plowing the land. Because if a large tractor ploughs the land after ploughing, it will lead to soil degradation and is not conducive to the growth and development of crops. Animal farming and machine farming have their multifaceted nature:

    There are advantages and disadvantages, although machine farming has the upper hand, this also needs a prerequisite as a foreshadowing.

    For example, the aging of the population is not very serious, there are new forces, flat Sichuan area, plain area, and geographical location, and the advantages of machine farming are very obvious. However, in the terraced fields in hilly and mountainous areas, the equipment of mechanical automation is not in the field, the population is aging, and there is no new force behind, and machine farming does not see any advantages. Animal farming does not have the obvious advantages of mechanized farming, but it is more suitable for some farmers to plow the fields and agricultural land.

    What is the reason for this? Because there are some terraces, if the mechanical equipment is not available, it can be reached by livestock, even if it is a sheep intestine path. Another is to raise livestock, busy is a little busy, a year down to the next cub or something, can not only subsidize the family but also organic fertilizer to the field, fertile soil.

  5. Anonymous users2024-02-09

    When I was a child, there was an old ox at home, and the plough was the production tool at home, until now, with the development of productivity and the changes of the times, the planting method has also changed from traditional manual planting to modern mechanical planting. What are the characteristics of ox ploughing and mechanical ploughing?

    1. Cattle ploughing. The traditional way of farming with oxen and ploughs retains the original characteristics of the farming era, where man and nature live in harmony, cow manure can nourish the fields, and ox farming does not damage the environment and can be done anytime and anywhere. Cows are the best friends that humans rely on for survival. In the paddy field, the buffalo responded to the shout of "oh shh

    On a rainy day, the old farmer wears a hat, a coat, rolls his trouser legs, and raises spotted bamboo strips, and the picture is beautiful.

    However, due to the backwardness of traditional cattle farming methods, it has a great relationship with the strength and cooperation of cattle. For a long time, the land in many places has not been subsoiled for many years, the soil cultivation layer has become significantly shallow, the plough bottom has thickened year by year, and the cultivated land has been hardened day by day, which has restricted the increase of grain output to a considerable extent. With the development of modern agriculture, there is an urgent need to carry out land subsoiling, break the bottom of the plough, improve the quality of cultivated land, increase the yield rate of land, and improve the comprehensive production capacity of agriculture.

    And so the machine came along.

    2. Mechanical ploughing.

    Compared with traditional cattle farming, the advent of the mechanical age greatly reduced the phenomenon of labor, low crop yields and barren fields for farmers. The advantage of mechanical tillage is that it can effectively break the hard bottom layer formed by long-term tillage or cattle ploughing, and greatly improve the water permeability and air permeability of the soil; In addition, mechanical ploughing can also greatly improve the ability of the soil to store rainwater and snow water, increase the soil moisture of the new soil layer in the dry season, and improve the water storage capacity of the tillage layer. Because a large amount of precipitation is stored underground, the evaporation loss and flow loss of soil moisture are greatly reduced, providing abundant natural precipitation resources for crop growth. Mechanical subsoiling can also effectively remove stagnant water and saline.

    Compared with traditional cattle farming, mechanical farming also has the advantages of high efficiency and low cost. A ploughing machine only needs to spend money once, and it can be recycled many times, and as long as farmers learn the basic operation, they can sit on the machine and operate it effortlessly, which greatly improves the operation efficiency. Obviously, compared with cattle farming, mechanical farming is more in line with the development of modern society.

    In general, despite the advent of the mechanized era, the traditional way of cattle farming also has value worth passing on, and cattle farming still exists in some places.

  6. Anonymous users2024-02-08

    When cultivating land in the countryside, cattle will be used to plough, but now people's lives have become better, many people will also use machines, the characteristics of the machine is that the speed is relatively fast, saving time and effort, and the characteristics of ox ploughing are more refined, with a sense of labor.

  7. Anonymous users2024-02-07

    Cultivated land in many rural areas has now been mechanized. The use of arable land to cultivate land can save time and improve efficiency. However, there are also some rural areas that are constrained by the terrain and still use cattle.

  8. Anonymous users2024-02-06

    Now that the machine is used, the cattle ploughing is more environmentally friendly, and the machine ploughing is more convenient, faster and can be used better.

  9. Anonymous users2024-02-05

    Be sure to choose the machine, because the machine ploughs the land faster and more efficiently, but if the ox ploughs the land, it saves costs.

Related questions
6 answers2024-07-21

1. Cylinder-by-cylinder adjustment method.

Turn the crankshaft until the compression of the 1st cylinder is completed, and adjust the intake and exhaust valves of the 1st cylinder. Then shake the crankshaft, according to the ignition order to make the next cylinder reach the end of compression, and then adjust the intake and exhaust valves of this cylinder, and so on, until the cylinder adjustment is completed. >>>More

11 answers2024-07-21

Choose the micro tiller from STIHL, Germany, which can play the function of turning the soil and weeding by changing the blade. Choose the micro tiller from STIHL, Germany, which can play the function of turning the soil and weeding by changing the blade. According to the current development, high-horsepower tractors are more economical to work, efficient to work more and make more money, it is recommended to try to make more horsepower, the brand depends on personal preferences, Deere, Dongfanghong, Dongfeng, Lovol are mainstream models, according to the actual needs to choose is correct.

5 answers2024-07-21

There are many brands of orchard micro-tillage, the quality is uneven, now the orchard micro-tillage machine is mainly four-wheel drive, and the diesel engine is used more in southern orchards such as citrus orchards, vineyards, etc., mainly used for ditching and fertilization, which can realize ditching, rotary tillage, weeding, backfill and other functions. >>>More

4 answers2024-07-21

When the diesel engine is under load, it runs unevenly, and the exhaust pipe emits black or white smoke. >>>More

7 answers2024-07-21

The four-wheel drive micro-tiller is mainly based on the rear spin, with large driving force, and the rear rotation function is better than the front spin! >>>More