The four wheel drive micro tiller is easy to use with front and rear drive, or easy to use with fron

The four-wheel drive micro-tiller is mainly based on the rear spin, with large driving force, and the rear rotation function is better than the front spin!

Reasons why the four-wheel drive rear rotation micro tiller is easy to use:

1. It can be equipped with a differential model, and there is a clutch at the right handle, which can achieve fast turning, which is very convenient to use.

The differential version is easy to steer, easy to operate and particularly flexible.

2. The four-wheel drive rear rotation micro tiller can be replaced with three kinds of knives for rotary tillage, ditching and weeding, and can also be equipped with ridge and backfill knives.

3. Gearbox.

There are fast, slow, and air plus reverse gears, which is more convenient to operate.

4. An electric ignition device can be installed, and a hand-pulled double start can be added to make the ignition lighter.

The following is a physical picture:

Four-wheel drive back-spin micro tiller.

All things considered, it has many advantages of rear-wheel drive and supports rear-wheel drive.

How to install the tiller correctly.

The micro tiller is powered by a small diesel engine or gasoline engine, which has the characteristics of light weight, small size and simple structure. Micro tiller is widely used in plains, mountains, hilly dry land, paddy fields, orchards, etc. With the corresponding machinery and tools can be pumping, power generation, spraying, spraying and other operations, but also can tow trailers for short-distance transportation, micro tillage can be freely exercised in the field, easy for users to use and store, save the trouble that large agricultural machinery can not enter the mountainous fields, is the choice of the majority of farmers and consumers to replace cattle farming.

2.Install the parts into components according to the technical requirements, such as the ditching knife of the micro-tiller, the deep ploughing resistance plate, etc.

3.To choose the right knife, first install the left and right plough knife combination, and pay attention to the plough blade is ahead. If the knives are installed in reverse, not only will the tillage be ineffective, but the knives will also be damaged.

4.Correct the position of each part, and then tighten the screws of each part and attach the pins of each part.

5.Be sure to pay attention to the safety of personnel and machinery when installing.

6.After installation, a comprehensive inspection and lubrication should be carried out, especially the various adjusting mechanisms and moving parts of the micro-tiller should be flexible, and then various special tools and spare parts should be checked and counted.

It depends on personal usage habits.

Farmers use four-wheel drive micro-tiller with a big difference between forward rotation and rear rotation, full function!

Summary. We are glad to serve you Four-wheel drive micro tiller is easy to use with front and rear drive, or easy to use with front wheel drive and rear rotation.

I think the rear rotation tillage is better than the front rotation, the most obvious advantage is that the wheels will not leave a trace, and the field rotation is better!

Secondly, the master who drives is also better, everyone knows that the gray tip of the spinning field is very large, if the front spin master will feel that the line of sight is not good, and the center of gravity in the front is less, and the center of gravity in the back is large, and it is also convincing to drive in the back!

The four-wheel drive micro tiller is easy to use with front and rear drive, or easy to use with front drive and rear rotation

I am glad to serve you Four-wheel drive micro tillage machine front rotation rear drive yam hidden easy to use, or front drive back rotation is easy to use, I think that the rear rotation tillage is better than the front rotation, the most obvious advantage is that the wheel will not leave a trace, Tian Xuan's good look more funny! Secondly, the master who drives is also better, everyone knows that the gray tip of the spinning field is very large, if the front spin master will feel that the line of sight is not good, and the center of gravity in the front is less, and the center of gravity in the back is large, and it is also convincing to drive in the back!

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the driving force for my progress. If you feel that I am satisfied with the answer of Fu Lu, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

Summary. Hello, dear.

The four-wheel drive is strong, and it can be used in paddy fields, sand fields, and normal operation, but it is much more expensive. In fact, in rural areas, many people don't care too much about four-wheel drive, and most of them are two-wheel drive, because two-wheel drive is cheap and saves money; General farmland cultivation is basically two-wheel drive, and it is still possible to bring a rotary tiller. If you plan to work for others, it is recommended to have at least 80 horsepower; If you use it yourself, generally 25 horsepower is fine, which is fuel-efficient and convenient.

Is it better to use four-wheel drive or two-wheel drive for rotary ploughing.

Dear, hello, I'm glad to be able to help you answer your questions, but typing takes a little time, please wait a minute, during this period about other fiber matching questions about the destruction of the problem, you can ask me early, I will try my best to help you.

Hello, the pro-four-wheel drive is strong, you can work normally in paddy fields, sand fields, but ** is a lot more expensive. In fact, in the countryside, many people don't care too much about four-wheel drive, and most of them are two-wheel drive, because two-wheel drive is cheap and saves money; General farmland cultivation is basically two-wheel drive, and it is still possible to bring a rotary tillage to send a machine. If you plan to work for others, it is recommended to have at least 80 horsepower; If you use it yourself, generally 25 horsepower is fine, which is fuel-efficient and convenient.

Micro cultivator is now used by farmers to replace the machine of cattle, because it has the characteristics of small, light, affordable and so on, it is favored by consumers.

1. Characteristics of four-wheel drive dual-purpose micro tiller (including forward rotation and rear rotation):

1.The operation of the micro-tiller is flexible and simple, and it is widely used in plains, hills, mountainous areas and other landforms, and can be applied to deep ploughing, shallow tillage, ditching and other operations in dry land, paddy fields, orchards and vegetable fields.

2.The micro-tiller is equipped with corresponding accessories, which can be used for soil cultivation, bottom fertilizer, weeding and other operations.

Second, the rotary knife of the front spin micro tiller is far away from people, which is relatively safe, but the operation is more laborious.

3. The operation of the rear rotation micro tiller is more labor-saving and flexible than that of the front rotation, but the rotary knife is closer to the person and is more likely to cause accidents than the front rotation.

When operating machinery, it is necessary to familiarize yourself with the operation and concentrate to avoid accidents.