How to use a hose to bring tap water to the second floor

As long as the hose length is okay and the water pressure is sufficient, just pull the hose and add a faucet.

The hose of tap water is connected from the outlet of the fixed tap water valve to the hose between the outlet that needs to be moved, such as the connection between the faucet and the control valve of the shower (showerhead), basin or vegetable sink, etc., and is generally not used for long-distance (and there are no very long specifications) connection pipes.

If the pressure is not reached, a booster pump needs to be installed.

A booster pump is a device that uses electricity to drive a water pump to increase the water pressure in the water pipe. If it is only a booster pump for single-family household use, it is recommended to choose a booster pump with a single-phase power supply, because household power supplies are generally single-phase.

You can buy a booster pump with pipeline connection, which is easy to install and takes up little space, only need to install the booster pump on the inlet pipeline, and it is best to match the pressure control device. The premise is that the amount of water supply must meet the needs of the first and second floors at the same time. Household booster pumps are only a hundred dollars.

1. Remove the fixed base on the faucet first; 2. Unscrew the nut on the threaded pipe by hand; 3. Then pass the hose through the nut and rebar, and at the same time pass the hose through the pool and fix it; 4. Plug the small end of the hose into the water inlet of the faucet and tighten it; 5. The rebar is fixed on the lower side of the faucet; 6. Just fix the nut again.

How to choose a faucet.

1. Test the valve core.

When buying a product, the first thing to look at is the spool, because it is the most important accessory. There are many kinds of spool materials, and the materials selected are different in different occasions, so it depends on the specific use occasions. In addition, you can't just look at the surface of the product, you should use your hand to dial the handle to see if it is bad, if the feel is smooth, the use of flexible means that the quality is good.

2. Product "ID card".

Each product has a product description, so you should read it clearly when you buy it, and you can also get a better understanding of the product. If it is an imported product that is missing, it is necessary to carefully look at the certificate, factory address, instructions for use, etc., because it is more expensive, if the quality is not good, it will cost too much.

3. Weigh the test switch.

You can also weigh the weight by hand, this method is very simple, generally speaking, the heavier the portion, the better the quality. When purchasing, you can also move the switch to see if the switch is tight, whether it is convenient to open, and see the water effect.

4. Look at the plating.

You also need to search wide to see the plating, if the quality of the faucet is poor, the surface will be white, and not smooth enough. And if the quality is not good, there will be spots on the surface, scratches, and rust after a long time.