How to deal with frozen tap water, how to thaw tap water frozen the fastest

There are several ways to thaw it:

1. Use hot water.

Cover the faucet and water pipe with a towel or damp cloth and unscrew the switch. Then start from the faucet, pour it with warm water a few times, then take a pot of hot boiling water, and pour it evenly back and forth on the water pipe, being careful not to burn yourself. If the freezing is severe, you can pour it several times until the water pipe is boiled.

2. Use a hair dryer.

If the tap water pipe in your home is ppr material and slightly frozen, you can use a hair dryer to blow your hair, be careful not to blow in one place, but up and down, so that you can thaw the water pipe.

3. Use a blowtorch.

The blowtorch method is suitable for cast iron water pipes.

There are many ways to deal with tap water after it is frozen, and the following is a specific method:

1. Boiling water thawing method When thawing the water pipe, you must first understand the degree of freezing of the water pipe, if the degree of freezing of the water pipe is not too serious, you can use the method of pouring boiling water, but remember not to pour boiling water directly, you can use a soft plastic pipe with a diameter of about 1 cm, insert the thin tube into the frozen pipe, and pour the boiling water into the plastic pipe for thawing. 2. Iron rod thawing method Unscrew the tap of the tap water pipe, put the iron rod into the fire to burn, make it red, the temperature of the iron rod is extremely high, and then insert the iron rod into the pipe, and the frozen water will melt after staying for a period of time, it should be noted that it is best to turn off the sluice gate when thawing to prevent the water from suddenly coming out. 3. Heating and thawing method In the thawing of tap water pipes, the most important principle is to increase the temperature of the frozen water in the tap water pipes, so that the water can be easily dissolved, and there are many ways to heat up the water in actual operation.

In the operation, you must pay attention not to bake directly with fire or use boiling water to scald directly, which will cause the pipe or water meter to burst.

Summary. Hello dear! First, you can pour warm water on the faucet and the water pipe, remember that it is lukewarm, not hot water, otherwise it is easy to rupture.

Or use a hose to connect to the faucet, then pour hot water into it and wait for it to thaw slowly. The second is to use an electric fan or hair dryer to heat it slowly and wait for it to thaw. Third, wrap the hose in a towel or other cotton object, and then pour hot water to thaw it slowly.

Hello dear! First, you can pour warm water on the faucet and the water pipe, remember that it is lukewarm, not hot water, otherwise it is easy to rupture. Or use a hose to connect to the faucet, then pour hot water into it and wait for it to thaw slowly.

In the second stage, use an electric fan or hair dryer and other heating tools to heat slowly and wait for thawing. Third, wrap the hose in a towel or other cotton object, and then pour hot water to thaw it slowly.

Kiss! If there is an outdoor faucet at home that can be used, then it is necessary to make temporary insulation for the faucet and water pipe according to the weather in advance, so that it will not freeze even if it encounters a cold wave. The specific method is actually very simple, that is, to make a long-term insulation treatment for the water pipe, so that it will not freeze, and at the same time, it can also ensure that the water pipe will not oxidize, so that the service life of the water pipe is longer.

1. In the night when the temperature is very low in winter, you can open the faucet a little bit, so that the water continues to flow out, and the flowing water can effectively prevent the water pipe from freezing even in a colder environment.

2. Wrap the water pipe with cotton, linen silk and straw rope, and at the same time wrap the water pipe tightly with cotton and linen fabric or antifreeze cover, and it is best to wrap the water pipe with a few more layers, so as to effectively strengthen the warmth of the water pipe, so as to prevent the water pipe from being frozen;

3. The mechanical temperature sensor switch refers to the automatic opening of the switch when the temperature is close to the freezing point, which can effectively release the cold water in the pipeline, and automatically close the valve when the temperature is suitable.

1. In the night when the temperature is very low in winter, you can open the faucet a little bit to let the water continue to flow out, the flowing water can effectively prevent the tap pipe from freezing even in a colder environment, and it is necessary to pay attention to the need for a small water flow when opening the faucet, if the water flow is too large, it is a very uneconomical thing to waste too much water;

2. Wrap with cotton, linen silk and straw rope, and at the same time, wrap the water pipe tightly with cotton hemp fabric or antifreeze jacket, and it is best to wrap the water pipe with a few more layers, so as to effectively strengthen the warmth and brightness of the water pipe, so as to prevent the water pipe from being frozen;

3. The mechanical temperature sensor switch refers to the automatic opening of the switch when the temperature is close to the freezing point, so that the cold water in the pipeline can be effectively released, and the valve will be automatically closed when the temperature is suitable for the key.