How to fold money paper ingots, how to fold ingots How to fold paper ingots

1. First of all, let's find a rectangular piece of paper.

Fold one short side to the other short side, but do not align, leave one side, generally leave half of the paper 1 3 can be.

2. After that, we will fold the upper layer of shorter paper, the opening edge to the opposite side, but do not align with the opposite edge, so that half of the previous layer of paper goes out.

3. After that, fold the paper below in the same direction, and align the edge with the edge of the bottom paper.

4. After that, we can see that the paper is wide on one side and narrow on the other, and we will fold the corners of the wide side to the line inside.

5. After that, the corner of the narrow side on the left side is also folded to the line inside.

6. After that, fold the narrow side in half along the inner line to the wide side.

7. Finally, we will stand up the big head of the origami, stretch it with our fingers, and press down on both ends to reflect the shape of the ingots, and we will quickly fold the ingots out.

What is ingot? Ingot is the currency of ancient China, there are two kinds of gold and silver ingots. Most of them are held by the scholar class and wealthy merchants, and are regarded as treasures by the people.

There are many kinds of prosperous wealth products in China, some are won by increasing luck, some are obtained by stealing, especially partial wealth, most of them are sue rui beasts, little ghosts suck money and steal money, and there is a product that relies on their own reproduction to get rich, that is, cornucopia, cash tree and gold ingots.

The role of ingots:

After the gold ingots are opened, they are placed in their own financial position, like chickens laying eggs and laying chickens, to breed profits, so as to prosper wealth, for hundreds of years, through the practice of feng shui masters, its effect is very good. Gold ingots attract wealth into the treasure, ingots have the effect of generating wealth and prosperity, and the wealth is rolling, as the so-called money and silver money are sent to the house, and the Fulu longevity is ten thousand years. The four elements of life and destiny are nothing more than happiness and longevity, happiness is peace, Lu is wealth, longevity is health, and happiness is needless to say.

Therefore, after the gold ingots are opened, they are placed in a specific position, which is one of the important magic tools for making money.

The feng shui function of ingots is mainly to generate wealth and prosperity, and it is mostly used in a pair, and there are 2 points in usage:

1. Put a pair of gold ingots on the largest window or window sill in the whole house, and put one on the left and right corners, the purpose is to absorb the wealth outside the window, and the bigger the window, the more prosperous the wealth.

Second, put it in the corner of the oblique corner of the door into the house, where the place hides the wind and gathers qi, and it is also a wealth position, and put a pair of gold ingots to strengthen the fortune.

How to fold gold ingots**.

Gold ingots, as the name suggests, are golden ingots, so first of all, you have to prepare a piece of golden paper, preferably gold foil paper, shiny, and looks more like gold ingots!

Fold method 2 of gold ingots: then fold one side in half at the beginning of the third of the fold.

Fold the ingots 3: Fold the other side in half in the same direction as in the previous step, note that it is in the same direction, not to both sides! But instead of a third, the edge of this side aligns with the fold line that was folded in half at the beginning!

Folding method of gold ingots 4: fold the corners of the triangle along the place where the white and gold cross the four corners of the folded rectangular gold foil paper, as shown below

Fold method 5 of ingots: Fold the white side in half along the dividing line between white and gold and fold it into a golden T-shape.

Fold 6 of gold ingots: Next, stretch the body shape from the long side in the middle to both sides.

The folding method of gold ingots 8: I introduced how to fold ordinary ingots before, in fact, the folding method of gold ingots and the folding method of ingots are similar, mainly the difference in paper, gold ingots should use golden paper, as long as the direction is not reversed, it is the same!

1. Take a stacked gold ingot.

paper used; 2. Fold the wide side of the paper source;

3. Fold the lower edge upwards to du;

4. Then turn the paper to the right;

5. Move the edge of the uppermost DAO surface downward;

6. The lower right corner and the lower left corner are folded upwards in turn;

7. Fold upwards again;

8. Fold the corners of the right and left sides inward;

9. Pull the corresponding position to form the shape of a gold ingot.

1. First of all, we need to prepare a rectangle.

The shape of the white paper, as shown in the figure below.

2. Align the upper and lower parts of the rectangular DAO-shaped white paper along the middle and inner points, and fold the creases tightly.

3. Fold the right part of the rectangle to the top left to make a small triangle. At the same time, fold the left part of the rectangle to the lower right to form a small triangle. And press and fold out the creases.

4. Then we flip the paper over, which is what it looks like in the picture below.

5. Align and fold the left and right parts of the paper, and press and fold out the creases, as shown in the figure below.

6. Then tuck the extra triangle from the left part of the paper into the inside of the right side, as shown in the figure below.

7. Follow the above method and stuff the extra part on the right to the left side, as shown in the figure below.

8, and then use your hands to stretch the bottom part of the ingots up little by little. Finally, you can use your hands to sort out the upper part to make the center of the ingots appear smoother. The ingots are ready.

The folding method of paper ingots is as follows:

1. The left and right corners are folded to the center.

Line This division needs to fold 2 sheets of the 2 sheets just folded back to back, and the third sheet is folded in pairs, wrapping the lower half of the 2 sheets.

2. Fold one side along the line.

3. Turn it over and fold the corners on both sides.

4. Fold the left and right sides inward.

5. Fold down the upper corners along the line.

6. Stretch out and succeed.

"During the Qingming Festival, it rains a lot, and the pedestrians on the road want to break their souls", in the blink of an eye, the Qingming Festival is coming, people have to go to worship the deceased relatives, and they must fold some ingots in advance, and ask them to take away the hearts and thoughts of their relatives. Method 1

Prepare a piece of tin foil, the ratio of length to width is 3:2, so that it will look better when folded.2 Fold the tin foil in half along the long side, note that the silver side is on the outside 3, and fold the folded side up about one-third.

4. Open the upper opening downwards and leave the folded part as it is.

Here's a side view.

5. Fold the larger part below, and the edge is flush with the bottom edge of the folded part, which is a side view.

6Fold the two corners of the silver part inwards at the top.

7. The two corners of the yellow part below should also be folded inward.

8. Fold the yellow part up along the dividing line with the silver part.

9Take it in your hand and open the fold.

10 The two sides of it are properly stretched outward, so that the inner part can be supported11 The outer side is slightly tidied up, don't suffocate it, and a ingots will be folded.

1 First of all, you have to have a rectangular piece of paper, folded in half.

2 Then fold back a little (don't be very.)

There are many daos, and they specialize in folding ingots.

One centimeter is enough for special paper) genus.

3. Pay attention to the second article above, folding back refers to the place where the top and bottom of the paper are folded in half.

4. After the fold, the middle space is stretched out, and the two sides of the fold are pressed inward.

5Fold the corners of both sides up a little.

6 ingots are ready.

The folding steps of paper ingots are as follows:

1. First turn the gold foil paper upside down, then fold it in half, with the back on the inside and the gold on the outside. After folding in half, one side is folded in half at the beginning of the third of the fold.

2. Fold the other side in half in the same direction as in the previous step, note that it is in the same direction, not to both sides! But instead of a third, the edge of this side aligns with the fold line that was folded in half at the beginning!

3. Fold the four corners of the folded rectangular gold leaf paper along the corners of the triangle where the white and gold intersect.

4. Fold the white side of the town in half along the dividing line between white and gold and fold it into a golden T-shape.

5. Next, stretch the T-shape from the long side of the middle to both sides, tidy up the shape of the royal grinding hand, and a gold ingot will come out.

Use scissors to cut the paper into a square of moderate size (there is no length limit on the side length of the square here, the side length will only depend on the size of the ingot), first put the diagonal line of the square paper, and then spread out, and fold the diagonal here to facilitate the later steps to make the center bulge part of the ingot.

Align the square paper on both sides of the paper, and then fold it to get a medium-sized rectangle to transport the muden.

Then align the folded rectangle in the second step with both sides in the same direction, and fold it again to obtain a small rectangle that is resistant to brightness.

<> fold the 4th step in reverse, and then fold the four corners together.

The ends are folded again, i.e., the corners of the ends coincide, forming a trapezoid.

Hold the trapezoid upright and open the long side outward.

Pull it away from the short side of the trapezoid (the bottom is open) and concave it with your fingers to get the middle bulge of the ingot.

The back is straightened, and the ingots are completed.

Step 1: Prepare two small pieces of paper, square or rectangular, as shown in the figure below.

Step 2: Fold the two small pieces of paper in half respectively (if the color is single-sided, the color side is facing outward), as shown in the figure below.

Step 3, then one of them is folded in half and does not move, and the other is folded in half and then turned over a side, wide and narrow, as shown in the figure below.

Step 4: Then insert the two pieces of paper together, and then align the sides after insertion, as shown in the figure below.

Step 5: The two "small sides" do not move, and the "big" part is folded together after the big corner is folded, as shown in the figure below.

Step 6, then stack the two "small sides" together, the direction does not matter, the top can be pinched, and the bottom is the "bottom", as shown in the figure below.

Step 7, finally pull the top flat and pull away the trace pure (if you want to make the middle have a bulge, just pinch a circle of small edges, no problem if you don't pinch it), and then adjust the bottom, in order to be able to "stand" up, here the paper ingots are folded, as shown in the trapped state or the figure below.

Extended information: ingots are made of valuable**or**, generally**most,**rare, in the history of Chinese currency, the official gold and silver are called "ingots", which began in the Yuan Dynasty, but as early as the beginning of the Tang Dynasty, when the Yuan Tongbao was in the world, the folk had to take its huge, precious meaning, and read it as "open the ingots", and the Yuan Dynasty called gold and silver money as "ingots", which is the meaning of the treasure of the Yuan Dynasty.

The folding method of paper ingots is as follows:Tools: several rectangular sheets of paper.

Specific steps: *8cm gold foil paper is folded along the center line of the short side, and the gold foil paper side of the stool pants is on the outside, and folded into a rectangular paper.

2. Fold upwards into a triangle with the folded edge of the 1st side of the rectangle.

3. The other 1 side is folded down at a right angle into a triangle to obtain a quadrilateral paper.

4. Take the midpoint line of the upper and lower sides of the quadrilateral paper as the crease, and fold it outward into a "W" shaped paper.

5. The 1 corner of the bottom edge of the "W" shaped paper is folded on the other side of the angular bisector, and the paper is pressed under the triangle paper, and the other 1 side is folded in the same way and pressed under the three-pure angular paper.

6. The jujube cavity is stretched out in the origami, and the middle is concave and folded inward, stretching the two corners.

7. Cut into an arc with scissors, and 1 ingots will be folded.