How to fix the cork board to the wall, how to fix the plank to the wall

How to fix the cork board:

1) It is recommended to use an electric drill to drill the hole and fix it with decorative bubble nails, which is beautiful and firm.

2) You can also consider painting a layer of wallpaper bottom film on the wall first, and then fix it with white latex.

3) If it is to be removed in a few days, it can be fixed directly with double-sided tape.

Cork boards. Usage:

2.Used for interior decoration, it can be cut into various shapes and spread on the wall, which has the effect of moisture-proof and sound insulation. Create a warm and comfortable living environment.

If it is a latex painted wall.

Don't use it.

How to paste the surface·· Because of the latex paint on the walls.

It is a latex paint finish.

plastering layer. Finally, there is the base layer of the wall.

It's easy to tear off the wall... You use a plastic anchor.

Bar·· It is a self-tapping screw.

The kind that is combined with plastic anchors.

Start by making a hole in the wall.

Pay attention to the size. Then stuff it straight in.

Even if you don't use it in the future.

You take it off. After that, just stuff the holes with plaster plaster.

Not really. Smear some latex paint··· As for the anchors.

You go straight to the hardware store.

As soon as you talk to people, you will understand... Oh.

How to fix the cork board to the wall:

First, clean the wallpaper within the fixed cork board with a clean, damp towel;

Use a pencil to mark the location of the hole to be punched;

Use masking tape (the kind that leaves no traces and is easy to remove) to dip a clean garbage bag on the area to be punched to catch the dust and debris drilled out;

Use an electric drill to punch holes in marked locations;

Blow off the residue in the hole and plug in the plastic expansion plug;

Remove the dusty garbage bag and fix the cork board to the wall with screws that match the expansion plug;

Install a decorative buckle cover on the top of the screw;

Finally, clean again with a clean, damp towel.

There are many ways to fix the template on the wall, such as fixing the template with nails, or playing cement steel nails on the top two with iron wires to fix the template, and then two pillars under the steel nails! Depending on what you are using the template, you must pay attention to safety and be firm.

1. This method is relatively simple and can be made directly with wooden core boards. First, make a groove on the wall with a cutting machine, with a depth of about 5 cm, directly embed the cut board into the groove, fill it with white latex and gypsum, and fix it, but it should be noted that this method can only be used as decoration, not load-bearing.

2. Adhesive method, suitable for ceramic tile wall.

3. Brick-concrete wall and concrete shear wall: first drill with a "percussion drill" on the wall, then drive a wooden plug into the hole, shovel it, and finally fix the wooden board with foreign nails or wood screws.

4. This is a simple method, mainly used to install narrow wooden boards, and the use of ready-made utensils is to use nails. There are many specifications of nails, the general one is 3 cm, if the board is wider, you can also use longer nails, such as 6 cm nails, this kind of nail is long and thick, there is no problem to nail the board directly to the wall.

5. Everyone knows this method, that is, to use a support nail, which can not only fix the board, but also fix it on the wall Similar to the tripod, it can be seen from the outside, unlike the above method to conceal and integrate with the wall.

The material of cork boards is characterized by different colors. Cork boards are not real wood, but oak bark, which is an excellent material. The oak tree does not die, it grows new bark.

So cork board is a more environmentally friendly decorative material. Cork is wear-resistant, mildew-proof, elastic, with obvious porosity and outstanding silent heat insulation. As a result, it is often used as a message wall or pasted on the wall of a workspace to facilitate information collection.

The color is mostly yellow-brown, not only not rustic, but also very sweet and natural, simple and fresh. Designing such a wall in the bedroom allows people to take off their guards, sleep with peace of mind, and save money on the bedside pouch, after all, it is comfortable enough to the touch.

<> doing such a design in a large area will appear thicker and too thick, Fei Mojun suggests that a small area of the store should be pasted on the wall to contrast with the white wall, which has a sense of layering! If you want to say which wall in your home is the easiest to knock on, it's definitely a few corners. A drop of paint today and a little stain tomorrow, especially if you have children at home, can be a headache.

Therefore, in any case, it is better to wrap the corners of the frequently moved areas with a soft board, and with this soft shield, you don't have to worry about filling in the corners again.

The light paint on the wall is too monotonous, so we can completely use the cork board of this wall, hang our favorite **, postcards, etc. here, the cork board does not look like a board, in fact, it is very soft, nails are easy to dig into, is the artistic atmosphere of the moment full? The décor is really not very good. Some walls are lighter in color, and children rarely like graffiti anymore, wrapping the wall with cork boards, and not tasting is not a way to maintain the home environment.

If the walls are not straight and leveling is too cumbersome, cork boards are definitely a good choice.

Of course, in addition to the corners where the cork board can be used for bagging, like any corner of the home, dining room, study, bedroom, etc., if you feel that it is a little monotonous and needs to be decorated, you might as well try it with the cork board, which can definitely attract the attention of others after completion, and its cost is not very high. I think it's a great way to decorate!

It is more beautiful, there are more colors, and it can be solved by some nails, or it can be solved by some special glue.

The material of the cork board is general, the flexibility will be relatively high, and the waterproof performance is also relatively good, not easy to damage, and it needs to be fixed on the wall through a special adhesive.

Materials: boards, nails, glue.

1. First of all, cut the universal angle steel into appropriate sizes.

2. Then put the metal partition, universal angle steel and triangle plate on the ground to assemble them together.

3. It needs to be done with bolts and screwdrivers. Tighten all screws. After standing on the balcony, you can put a lot of things.

4. The balcony shelf is made of universal angle steel and metal partition. This is a metal partition. The diagram is the finished diagram.

It has a detailed problem.

And it is very serious, in the problem of moisture in the future, and secondly, the block board is directly driven into the wall with nails, so that the uneven surface of the board is in direct contact with one board, as well as the impact of the surface decorative material and other violations.

The correct way is to brush back the blockboard edible vegetable oil or tung oil, and leave it to dry for later use. The wall dowels and then the 18 cm 10 cm blockboard cutout will be driven to the wall 18 cm blockboard, nail the bolts, adjust the flatness of the strip, will nail the gun on the edible vegetable oil or tung oil blockboard to adjust the flat slats. Yes.

Before <>installing the cork boards, you need to choose a location in the wall where you want to install them, and then use an electric drill or other oblique drilling tool to make holes in the wall where you want to hang the mountain. After that, you need to prepare screws to fix the cork to the wall, and then add some small light bulbs to decorate the cork wall. It is also possible to use the pasting method to glue the cork to the wall, so that the wall will remain intact.

Prepare a bottom film and stick it on the wall, apply latex and other adhesives to the film cloth, and you can stick the cork to the wall. If you don't want to use latex, you can also use double-sided tape to fix it.