How to fit the paper cut art painting with the wooden board

Steps to make paper prints:

1. Create a draft: according to the intention of your own creation or the essence of the content of the work, use a pencil to draft in the form of red drawing, and pay attention to the sparse relationship between the composition and the lines of the picture: which places in the picture are the most sparse, which places are the densest lines, which places are not sparse and not dense, and pay attention to the artistic changes in size, length and straightness between each other.

Second, the draft: first the engraving of the blow molding paper with a dry cloth gently rubbed treatment, so that its surface is not shiny for easy coloring, and then use a foam watercolor pen to draw directly on the blow molding paper, the place that is not well drawn, can be gently wiped off with a wet towel and then painted. The time of drawing should be drawn from the top of the blow molding paper, so as to avoid blurring the lines of the foam watercolor pen with the palm of your hand.

3. Plate making: use a colorless ballpoint pen along the handwriting of the manuscript to carve hard, to have a certain depth, carve out the outer wheel gallery of the manuscript, pay attention to the force of light life when carving, do not draw through the blow molding paper is appropriate, because the blow molding paper is softer, the colorless ballpoint pen is carved into a dent, the line is dense, and the paper is sparse to form a concave block, and the sparse place of the paper is gray.

4. Printing: first put the gouache advertising pigment on a flat plate, roll back and forth with a rubber roller, so that the rubber roll is evenly colored (note that too much water can not be added to the pigment), and then roll the color on the engraved blow molding plate (according to the needs of the picture, you can adjust various colors at will), so that the blow molding paper prints are evenly colored. (When rolling on the blow molding plate, you should say goodbye to paying attention, and slowly roll the cross shape in one direction, first from bottom to top, and then from right to left, never roll back and forth, and not use too much force).

Finally, cover the blow molding paper with drawing paper or rice paper, press it with a little force in the palm of your hand or dry cloth, when you feel that the print is almost the same, you can lift a corner to see if it is printed, if the print is not true, you can roll some color in the place where the color is missing, if the pressure of printing is not enough, you can put the paper plate flat and continue to wear out the print until you are satisfied.

Paper printmaking is the use of various paper materials to make plates, through a variety of means to process and produce printed prints. There are various production methods for paper prints, including cut-and-paste, knife carving, strokes, wisps, and even tearing and kneading by hand; And it can make letterpress, gravure, hole plate and comprehensive version, etc., and the performance space is very large; The printing color can be monochrome and chromatic; Pigments can be oily, watery and powdery; There are rubbing techniques that I have learned before, as well as missing printing methods, stamping methods, etc. The specific steps are different depending on the material.

If it is a handmade paper-cut made of rice paper, it takes a little effort to paste it, but it is relatively simple after mastering the skills;

First of all, apply glue or other sticky media to the place to be glued, and solid glue is recommended here; After coating, put the paper-cut flat on a piece of paper slightly larger than the paper-cut, which is matched in the general paper-cut packaging bag, and then hold up the paper, shoot the paper-cut together with the pad paper to the glued place, and then remove the pad paper; If there is no place to stick it firmly, it can be glued separately;

However, there are flocking cloth paper-cuts on the market now, which are easier to stick, and double-sided tape can be directly pasted;

If it is a handmade paper-cut made of rice paper, it takes a little effort to paste it, but it is relatively simple after mastering the skills;

First of all, apply glue or other sticky media to the place to be glued, and solid glue is recommended here; After coating, put the paper-cut flat on a piece of paper slightly larger than the paper-cut, which is matched in the general paper-cut packaging bag, and then hold up the paper, shoot the paper-cut together with the pad paper to the glued place, and then remove the pad paper; If there is no place to stick it firmly, it can be glued separately;

However, there are flocking cloth paper-cuts on the market now, which are easier to stick, and double-sided tape can be directly pasted;