What are some practical wallpaper tips?

Introduction: For some people, sticking wallpaper when decorating is a good choice, which can be said to be both economical and convenient, so what are the practical wallpaper skills?

For many wallpaper processes, do the first step to ensure that there is no problem afterward, if the first step is not done well, then no matter how serious it is, it will not help. Therefore, first of all, before pasting wallpaper, check whether the wall you want to paste is flat, whether there is any bulging, and whether there is any vacancy. At this time, it is best to scrape off the wall of the wall, and then brush the putty again, and then polish it to ensure the smoothness of the wall before it can be carried out after the project.

And there are some families in the decoration has been painted latex paint, latex paint on the wall can not be directly pasted wallpaper, in this case will have a bad impact on both sides, it is best to brush a permeable base film on the latex paint wall, so as to ensure that there are no other problems.

After ensuring the flatness of the wall, then it is time for the process of the base filmIf you have already pasted wallpaper before, then you don't need to brush it again. However, if you stick it for the first time, you still have to brush it, and after the wall is flattened, you will use the tool to brush the base film to paint it back and forth. And don't be too impatient when brushing the base film, you have to brush it over and over again, and wait for it to dry completely after brushing, generally it takes a day or half a day to dry.

When preparing to paste wallpaper, first of all, you must protect the sockets on the wall and the floor door frame on the wall. Then start tiling the wallpaper, it is best to start from the corner of the wall when tiling the wallpaper, ensure that the first layer of wallpaper is completely perpendicular to the wall, and then start laying in such piles. If you don't have enough, you can pause it first and make up for it when you don't play at the end.

The cutting of the wallpaper must be paid attention to, it needs to be softened after gluing, the smoothness of the wall, the cleaning of the wallpaper, and the processing of details.

It is necessary to ensure the flatness of the wall, and then it is also necessary to fill all the uneven places with putty, and it is also necessary to cut according to the height and width of the wall, and at the same time, it is also necessary to mix water and glue together, and then apply it with a roller, or you can seek the help of professional workers.

What are the skills of sticking wallpaper Come and learn togetherIn the process of house decoration, wall decoration is very important, it can be said that it largely determines the style of the whole decoration. Therefore, when decorating, many people will choose to pave wallpaper in order to make the wall more ornamental. Whether the wallpaper is good or not is also an important factor that directly affects the aesthetics.

What are the tips for sticking wallpaper? Let's learn together.

One of the most important wallpaper tips is to remove the original old wall skin, including wallpaper, paint and other things. If there are potholes or cracks on the wall, you can use gypsum powder to fill these places. If there are still some poor quality partition walls or external walls that need to be insulated, they should be covered with plasterboard.

The second step of the wallpaper technique is to brush the varnish on the wall, taking care to brush it evenly and maintain the right thickness. This is followed by two putty scrapings. After the putty is dry, then use sandpaper to polish the wall to remove the particles and debris that are uneven and uneven, so that the wall is smooth and clean.

The third step of the wallpaper technique is to paint the wall again with varnish, and this layer is evenly and not too thick. The purpose of this step is to avoid the wallpaper glue on the wall, so that the wallpaper can better fit the wall, so that the wall surface is smoother after the wallpaper.

The last step is to put up the wallpaper. When the thicker wallpaper is evenly coated with wallpaper glue, it needs to be left for a while. There is another point that cannot be ignored in the wallpaper skills, that is, after pasting the wallpaper, it is necessary to clean up the excess residual glue in time to keep the wall clean and tidy.

At the same time, after the wallpaper is pasted, remember to scrape it flat from the same direction.

In fact, the above wallpaper skills are very proficient in professional technicians. If you're worried that you won't be able to handle it, it's better to ask a professional wall decorator to help.

You can get it for free

The steps to apply wallpaper are as follows:Material preparation: scissors, ruler, knife.

1. Use a pencil to draw the line to be cut on the wallpaper.

2. When pasting, first tear off a part of the paper behind it, paste it from top to bottom, and tear off the rest of the paper while pasting.

3. At the same time, you should use this scraper to scrape off the bubbles from top to bottom.

4. If there is an obstacle, you can draw it with a pencil and cut it with a knife.

5. If there is a gap, you can use wallpaper to make up for it, and this is done.

Methods of wallpaper: check the wall, do a good job of ground protection, measure the size of the wall, cut the wallpaper, glue and soften the wallpaper, paste the wallpaper, and clean the wallpaper. Tip: Pave from top to bottom, prohibit ventilation.

First, the method of pasting wallpaper.

1. Check the wall: First of all, check the wall, in addition to keeping the wall clean and flat, but also check the pH of the wall. If the wall has been painted before, it will take more than 15 working days for the wall to dry before the wallpaper can be pasted.

2. Do a good job of ground protection: Generally, when the wallpaper is pasted, the ground has been laid with floor tiles or floors, so before the wallpaper construction, a layer of plastic film should be laid on the ground. This film protects the floor well by avoiding falling glue from staining the floor.

3. Measure the size of the wall: measure the wall surface to be pasted with wallpaper, and calculate the amount of wallpaper. For example, the width of the wallpaper to remove each protective edge is its shortest distance, and the height from the top of the wall to the baseboard is the shortest height of the wallpaper.

4. Cutting wallpaper: When cutting wallpaper, the height of each wallpaper should be larger than the actual size of the wall length, generally about ten centimeters. Second, the remainder of the crop can be kept for later repairs.

If there is an extra beam in the middle of the complete wall, then the beam can be without wallpaper, so the effect will be better.

5. Glue softening on the wallpaper: use a scraper to evenly coat the glue on the wallpaper, and then fold the wallpaper in half to soften it for a period of time. In addition, when gluing, an orange protective tape should be laid so that the surface layer of the wallpaper can be folded in half to avoid the glue on the surface.

6. Wallpaper pasting: When pasting the wallpaper, you can use an instrument judge to keep it horizontal and vertical, and you should also make a surplus of its upper and lower positions. Secondly, the action should be fast when pasting, otherwise the glue will not be able to stick if it dries, and you can't tear up the wallpaper that has been pasted and then paste it.

7. Wallpaper trimming and cleaning: If it is a wallpaper with a pattern, then pay attention to whether the pattern is aligned when the pattern coincides, and also cut the overlapping parts. In addition, the switch panel must be straightened when pasting, so that the effect is good-looking, and the excess glue at the wallpaper splicing should be cleaned with a rag in time.

Second, the skills of sticking wallpaper.

1. From top to bottom, from high to low, first vertically and then horizontally arranged in order to lay wallpaper. When laying wallpaper for the first time, you should first find the baseline, then pave according to the laying order, then gently press it with your hand to smooth it, and then scrape it flat with a scraper.

2. If the wallpaper is immediately ventilated after pasting, it is easy to cause the wallpaper to warp and bulge. Before the wallpaper is completely dry, the heating or air conditioning should never be turned on indoors, otherwise it is easy to cause the wallpaper to open and crack due to thermal expansion and contraction.

1.Wall treatment: use a scraper and scrape off the wall impurities, floating soil, and the holes and cracks are paved with gypsum powder and smoothed, if the wall texture is soft or has a powder layer and swept through the latex paint, the wallpaper base film should be painted once first, so that the wall is firm, and the wallpaper will not fall off.

2.Cutting wallpaper: Measure the height of the wall first, and then cut the length of the wallpaper

Do not cut the flower wallpaper according to the height of the wall about 5 to 8 cm in length, as the upper and lower trimming: the flower wallpaper needs to consider the symmetry of the pattern, so the cutting length should be increased according to the actual situation, usually 8 to 10 cm longer.

3.Coating glue: the wallpaper glue is painted on the back of the cut wallpaper with a brush, special attention must be paid to the edges around must be coated with glue to ensure the quality of construction, the painted wallpaper, the glue is folded and placed for 5-10 minutes (note, no external force shall be applied, so as not to crease the wallpaper, especially the cloth) so that the glue can be posted after completely penetrating the bottom of the paper, and several pieces of wallpaper are painted each time, and posted in order.

4.Wallpaper construction: Generally the first wallpaper is posted on the side of the door or in the dark corner from top to bottom, with a scraper from top to bottom, from the inside to the outside, gently scrape the wallpaper, squeeze out bubbles and excess glue, so that the wallpaper is flat and close to the wall.

5.Trimming and cleaning: cut off the excess wallpaper at the upper and lower ends, the knife edge should be sharp to avoid burrs, and it is best to use a Japanese imported blade that sells a piece of yuan on the market when cutting some wall cloths.

Then use a sponge dipped in water to completely wipe the glue remaining on the surface of the wallpaper to avoid the wallpaper from turning yellow, after the wallpaper is dry, if there are bubbles on the surface, cut it with a knife and inject the glue and then flatten it to eliminate it (it is better to use a syringe).

Tear off the things behind the wallpaper, align them on the wall, and slowly tear off the unused layer of paper, while using a towel to wipe the glue and the wall joint. This will avoid blistering! Hee-hee, I hope your wallpaper sticking goes well!

Wall leveling--- make base film--- brush wallpaper glue - paste wallpaper (pay attention to the flowers).

It is best to let a professional master post it. This is more detailed, you can refer to it.