What are the tips for sticking PVC self adhesive wallpaper?

1. Wipe off the dust and oil stains and other pollutants on the surface of the paste position and dry it (the paste surface should be flat and not wet).

2. Hold the sticker in hand before pasting it, and then measure the cropping.

3. From top to bottom, carefully paste the wallpaper, gradually remove the bottom paper on the back, remove the bottom paper at the same time, use a soft cloth or towel to gently smooth the wallpaper ** to both sides, and discharge all the bubbles to ensure a smooth effect.

4. If there are bubbles after pasting, prick them with a needle and run away the air.

1. How to stick to the uneven place.

If it is wallpaper, you can stick to the wall, if the wall is uneven, first wipe it with plaster, and then glue it with wallpaper, if it is the latter, you can't stick it on the wall, you really want to stick it on the wall, you can only stick it on a wooden board that pushes and falls, and then hangs it on the wall If it is smooth, you can stick it directly, if it is wood, you can grind it with sandpaper and then stick it, which is relatively strong and flat.

2. How to deal with cement walls.

1): Generally, the putty is scraped twice on the wall and then polished, and the base film can be brushed again, the base film is good and cheap, and the putty paste is generally about 17 yuan a bag. You can scrape ten square meters (twice) depending on the flatness of your wall.

2): You must scrape the putty again, so that the wall can be treated flat, but you don't need to brush latex paint Moreover, the cement wall can not be directly glued with wallpaper. To put it bluntly, the base film plays a role in sticking firmly, and the base film is generally used.

But if it is the self-adhesive wallpaper, the problem is not very big, it is not that the cement wall can not be pasted with wallpaper, but the flatness of the cement wall is not enough, you must first scrape a 801 white cement, and then scrape one or two talcum powder sanding to confirm that the wall is flat.

This is the same as sticking stickers. When pasting, you can only tear out a little bit, align and stick it firmly, and then tear the backing paper while sticking, which can be used with a wooden scraper to press it neatly. If it is without a pattern, it is easier, and if there is a pattern, it is necessary to consider factors such as flowers.

The base layer of the wall should also be cleaned, and there should be no dust and oil, otherwise it will fall.

PVC wallpaper is a wallpaper made of PVC, a polymer, and high-quality PVC wallpaper is non-toxic and has a certain waterproofness. Next, PCHOUSE will introduce you to the precautions for paving PVC wallpaper.

1. People who are prone to odor and allergies should choose environmentally friendly healthy adhesives. Before construction, please confirm the color number, quantity, and production date, and paste the wallpaper of the same batch number in the order of the box number during construction.

2. The construction wall needs to be smooth and dry, without concave and convex cracks. The construction environment temperature is maintained at 10-30. When cutting, the corresponding texture should be considered, and 3-5cm more than the actual construction length should be reserved.

3. The glue needs to be evenly coated with Shenyuan as a whole, and it takes about 10 minutes of waiting time after brushing, and the paste should be completed within 40 minutes as much as possible (too long waiting time will cause the paper on the back to absorb too much water, and the glue will be opened at the cutting edge).

4. Please wipe the glue overflowing from the connection part with a clean wipe or wet sponge. For flower construction, it is better to use brushes and rubber pressure rollers.

5. It is forbidden to overlap the connecting parts, and the connecting parts must be treated with a pressure wheel. The scraper is prone to PVC layer expansion and contraction, resulting in paper peeling.

6. If there is an abnormal phenomenon after construction, stop the construction immediately, find the reason, and contact the dealer. After exclusion, the observation results should be tried again. If it is judged that it is obviously a quality problem of the wallpaper, you should immediately bring the problem product and the supporting label of the balance to get in touch with the first supplier.

The company will provide exchange or return service for products sold through normal channels. The Company will not accept complaints about failure to comply with the above.

7. After the construction is completed, avoid artificial drying of wallpaper or open windows for direct ventilation, which is prone to drying and deformation.

In order to ensure the quality of PVC wallpaper, the treatment of the wall in front of the wallpaper is the key. The treatment of the wall is to make the wall smooth, clean, smooth, dry, solid (no cracks, holes or floating dust). So, what are the requirements for PVC wallpaper pasting wall?

Let's find out with Tubarabbit!

1. PVC wallpaper paste wall requirements.

1. The wall treatment should be smooth and clean. There are irregularities or cracks in the surface of the walls, which are removed with a blade and smoothed with putty. After drying, sand smooth.

2. If the wall is exposed to moisture, it is best to use a fungicide and carry out special treatment to remove mold.

3. If one side of the wall is a bathroom, the inner wall of the bathroom needs to be treated with special waterproofing, otherwise, the wall will be damp for a long time and the wallpaper glue will fail.

4. It is recommended to brush the base film on the wall once to protect the wall and protect the wall from moisture. Sandwork with sandpaper and allow to dry.

2. What are the advantages of PVC wallpaper pasting wall requirements?

1. Good decorative effect. Because the surface of PVC wallpaper can be processed in various ways, it can resemble natural stone and brocade, and it can achieve the effect of mixing fish and pearls.

2. Superior performance. According to the requirements, it is processed into a product that is flame retardant, mildew resistant, not easy to condensate, and not easy to be damaged by machinery.

3. Suitable for large-scale production. PVC wallpaper has good processing properties and can be produced continuously in industry. Bright celery.

4. It is convenient for pasting construction. Paper-based PVC wallpaper can be bonded with 107 adhesive or milky white glue with good air permeability.

5. Long service life and easy maintenance. The surface of PVC wallpaper can be washed and has excellent acid and alkali resistance.

3. What are the disadvantages of PVC wallpaper pasting wall requirements?

Most PVC wallpapers have poor air permeability, and the humid environment causes a lot of damage to the walls. Some people say that the environmental performance is not high, and good PVC wallpaper will not bring harm to the human body. Generally speaking, high-quality PVC wallpapers meet the standards and will not cause harm to the human body.

PVC self-adhesive wallpaper is deep embossed wallpaper, resin wallpaper, is a kind of wood pulp fiber paper, non-woven fiber paper as the base material, the surface is coated with high-grade resin slurry, the use of professional deep embossing production equipment, according to different patterns with different printing wheels, on the surface of the wallpaper printed on the required wallpaper pattern. After the wallpaper is softened, the surface of the wallpaper is pressed by the embossing roller to produce the corresponding texture effect. It also includes drying, high temperature, cooling and other multi-channel craftsmanship to ensure the three-dimensional appearance and environmental performance of the wallpaper.

Product advantages: no need to brush glue, can be directly pasted decoration, easy to use, the surface of this wallpaper can be scrubbed, the back of the adhesive (do not feast with another glue) is as easy to paste as a sticker. The wallpaper is colorful and diverse, rich in patterns, safe and environmentally friendly, convenient for construction, and the wallpaper has a certain sound absorption, heat insulation, mildew prevention, and anti-bacterial functions.

It can be better anti-aging, insect-proof, non-toxic and non-polluting. The surface is easy to clean. Thus becoming a trend and trend in home decoration.

As the weather continues to warm, the grass in spring has sprouted, and everything in the house is so thriving, so I decorated the home with self-adhesive wallpaper on the weekend, and changed a new mood in spring. But do you know any tricks for self-adhesive wallpaper? When we paste, we must do a detailed investigation, and then carry out construction, let's see how the wallpaper is pasted on the wall.

What tricks are there for self-adhesive wallpaper.

1. Check whether the wall is smooth and flat.

When self-adhesive wallpaper is applied to the wall, we must make a detailed check of the smoothness and flatness of the wall, and then clean it up and paste it. Ground protection should be done before pasting. Spread a layer of plastic film on the floor.

The film prevents glue from falling to the ground and protects the floor or tile.

2. Stir the base film in the barrel and use it evenly.

Before self-pasting wallpaper, we must stir the base film evenly in the barrel, otherwise it will affect the quality of wallpaper pasting. Because the base film can prevent the moisture extravasation of the wall, moisture and mildew, and at the same time, it can isolate the alkaline substances on the wall, solidify the wall, and prevent the wallpaper from falling off.

3. Stir the base film evenly and brush it on the wall.

The base film is stirred evenly and brushed on the wall, and then the wallpaper is pasted, but a beam must be pasted, otherwise the wallpaper will not be in good shape.

4. Measure the width and height of the wall, record the numbers and cut the wallpaper with a utility knife.

Before pasting the wallpaper, the wallpaper must be measured, and then the wallpaper is cut by its width and height to meet the needs of the wall and paste. Before cutting the wallpaper, you should also measure the scale. At the same time, it is necessary to maintain the symmetry of the wallpaper when cutting.

The asymmetrical wallpaper needs to be increased by 5 to 8 cm according to the height of the wall, which is used for trimming up and down; For flower wallpaper, the symmetry of the pattern needs to be considered, and the leakage should be increased by 8 to 10 centimeters. The remaining part of the wallpaper can be kept for later repair.

Fifth, ensure that the paste is firm.

When pasting the wallpaper, be sure to ensure the firmness of the wallpaper, and the cut wallpaper must be flat facing up, and one side is pasted on the ground. Then use a roller to evenly paint the glue, brush the glue on the wall, the width should be 30 mm wider than the wallpaper, pay special attention to the edges around must be coated with glue, when the glue completely penetrates the bottom of the paper, the glue is folded and placed for 5 minutes, so that the wallpaper softens for a while, but must not apply external force to avoid creases in the wallpaper.

6. Find the baseline at the corner of the wall and paste it in order.

When pasting wallpaper, we must find a good baseline in the corner of the wall, and then paste it one by one, and when pasting, we must gently flatten it with our hands from top to bottom. Then use a scraper from top to bottom, from the inside to the outside, gently scrape the wallpaper, drive out air bubbles and excess adhesive, and make the wallpaper and the wall solid. Then dry the wallpaper with a damp towel to prevent it from turning yellow in the future.

When pasting the second wallpaper, overlap the end of the wallpaper by two centimeters, cut off the overlapping part with a utility knife, and remove the remaining part and scrape it flat with a scraper.

This wallpaper is pasted on the wall, the surface of the wall must be flat, and the surface of the wall must not be white to be pasted, and the surface that can absorb the points must be sealed before sticking the wallpaper. After the wallpaper is attached to the wall, use a dry cloth to smooth back and forth several times to make the wallpaper and the wall more tightly bonded.

1.For best results, the product must be applied to a smooth surface, and the surface of the wall must be dry and free of mold, oil or other dirt. If you want to stick wallpaper to a rough surface, the first step is to polish it with sandpaper and wash it with water or a mild detergent to avoid affecting the results.

2.Tailor the product to the size of the surface you want to stick to. It is better to leave a margin of about 5cm.

3.Tear the film from the bottom paper, pull the film forward with one hand, and flatten the surface of the film from the middle to both sides with the other hand. It is easier to smooth with a soft cloth.

4.When you start pasting, it is recommended that you stick it along the wall from top to bottom, and gently accumulate bubbles and folds from the middle to both sides. Large bubbles that can be punctured with a needle to squeeze out the air.

What is the wall, the paper is not glued!

Self-adhesive wallpaper pasting method:

1. Wipe off the dust and oil stains and other pollutants on the surface of the paste position and dry it (the paste surface should be flat and not wet).

2. Hold the sticker before pasting it, and then measure and cut 3. From top to bottom, carefully paste the wallpaper, gradually remove the bottom paper on the back, and at the same time remove the bottom paper, use a soft cloth or towel to gently smooth the wallpaper to both sides to discharge all bubbles to ensure a smooth effect.

4. If there are bubbles after pasting, prick it with a needle, and run away the air on it, although it is said that self-adhesive wallpaper, but you can really stick the wallpaper very well or find an experienced wallpaper installation master to help, it is recommended to find the wallpaper installation master of the wallpaper installation platform to help, because you may have wrinkles, warped edges, bubbles or something by yourself, you paste it easily, and it is not simple to tear it off when it is broken.

Wallpaper pros and cons:

Pure paper, non-woven fabrics, spinned fabrics, etc. are used as substrates, and PVC paste resin is sprayed on the surface, and then printed. It is processed by embossing and other processes. It has a strong three-dimensional sense and can be made into a variety of realistic texture effects, such as wood grain, imitation ceramics, etc.

It has a strong texture and breathability, and can resist the erosion of grease and moisture, and can be used in almost all parts of the home, including the kitchen and bathroom.

Disadvantages: Most of the PVC wallpaper has average air permeability, and in the humid climate of China, the damage to the wall is great, and the environmental performance is not high.

Precautions for wallpaper paving.

1.The base of the wall should be smooth and smooth, the yin and yang angles are smooth, straight, no cracks, chipping corners, pitting, after dealing with the wall base, you need to brush the nitro or alkyd varnish again to prevent the wall from being pulverized, and you should pay attention to thin, even, and not too thick when brushing.

2.When pasting wallpaper, you should use environmentally friendly special glue, good viscosity, one kilogram of glue can be pasted 7.

3.Cloth glue apply the glue to the wall, apply the glue to the back of the wallpaper and fold it, and let it stand for about a minute.

4.Dry paste method, wallpaper does not get wet, butt, flower, tight, or with lap tailor construction method, can not squeeze the glue out of the seam.

5.Use a soft plastic scraper, be careful to push and wipe, do not extrude the glue on the surface of the wallpaper or scraper, if you accidentally extrude, you must clean it with a wrung out wet towel to keep the wet towel clean and hygienic.