The jade tree I raised has become like this, and it is poured on both sides, what should I do?

Yushu. The lodging of the branches may be due to the phenomenon of overgrowth, the soil around the plant is not compacted when it is first potted, or it may be due to the dehydration of the plant causing the branches to become soft, or the branches are eaten by insects. In short, there are many causes of lodging of branches in jade trees, especially there are too many factors that cause dehydration.

1. Treatment of lodging caused by prolongation.

Although the root system of the jade tree is underdeveloped and the growth is relatively slow, this does not mean that it does not show the phenomenon of overgrowth. It is also more likely to grow in an environment with abundant water and fertilizer and poor light, especially in the spring and autumn growing season. Therefore, we need to topping the plants in time, and at the same time ensure that the maintenance environment is well-lit and well-ventilated, and that nitrogen fertilizer is not biased, and bikaphosphine and potassium fertilizer are supplemented to ensure that the plants do not grow and lodging.

Second, the treatment of lodging caused by changing pots.

Although the root system of the jade tree is not very developed, it prefers fertile soil, and the original has grown in pots for a long time, and the nutrients in the soil will become less and less, so it also needs to be repotted regularly. However, when changing pots, the root system of the plant should be protected as much as possible, and the soil around the plant should be compacted after potting, otherwise the plant will be prone to lodging in the case of unstable fixation.

3. Treatment of plant dehydration and lodging.

Yushu is relatively drought tolerant but not waterlogging, but it is easy to cause lodging when it is dehydrated for a long time. At the same time, when the root system cannot absorb and improve the water normally, the plant is also prone to dehydration and lodging. Of course, if the potting is too much and the roots are injured, and the potting soil is compacted and affects water infiltration, it may also cause the plant to dehydrate and lodging. Therefore, in the process of maintenance, in addition to watering in a timely manner and not excessively, we should also pay attention to protecting the root system.

Fourth, the treatment of lodging of disease and insect invasion.

Bonsai. If you plant jade trees, you must provide them with a well-lit, bright and ventilated maintenance environment, otherwise the plants are susceptible to pests and diseases. Once the branches of the plant are attacked by pests and diseases, they are often prone to break or lodging.

Therefore, we should do a good job in prevention and control work.

The potted jade tree is poured on both sides, which is caused by excessive watering, excessive growth potential, and insufficient potassium fertilizer. It is recommended to prune it properly, reduce the crown width, stabilize the center of gravity, and fix it with a bamboo skewer if necessary; Spray 300 times the liquid of potassium dihydrogen phosphate on the foliar surface, and irrigate the roots with the remaining solution, irrigating the roots once every half a month or so, and doing it 3-4 times in a row.

1.The wilting of the jade tree is mostly caused by three factors.

2.One is that the light is too strong, it likes light, but only in astigmatism environments.

3.If the plant is exposed to strong sunlight for a long time, the plant will be sunburned and wilted.

4.Move to a cool and well-ventilated place in time.

5.The second is that there is too much watering, and there is a certain ability to tolerate drought, but it is not tolerant to waterlogging.

6.Water will hinder the respiration of the root system and will easily wilt.

7.It is necessary to drain the water as soon as possible and ventilate more water.

8.Third, the soil is unsuitable and too sticky, so it is recommended to change the soil as soon as possible.

The jade tree prefers warmth and dryness, good sunshine and ventilation. Prefer loose sandy culture soil, avoid over-wetting soil. If the potting soil is too wet, coupled with poor ventilation conditions, it is easy to lose leaves.

In the middle of summer, when the temperature is high, the jade tree is in a semi-dormant state, and it is no problem not to water for many days, and it is necessary to stop fertilization, pay attention to ventilation, and prevent the leaves from turning yellow and falling off.

Now the air pressure is very low, and the indoor air is dull, which is the main cause of leaf litter. It is recommended to put the pot outdoors, place it in a ventilated place, water less, and keep the potting soil dry until the leaves are slightly soft and slightly drooping before watering, and the growth can be resumed when the weather is cool.

Methods of maintaining jade trees:

Yushu's real name is swallow palm. The fat and rich green leaves are as smooth as jasper, and the vigorous and simple branches are like a big tree. The living room desk is similar to the royal jade carving bonsai of the Forbidden City, graceful and luxurious, and the scenery is beautiful.

Swallow's palm, also known as thick-leaved sedum, is a pulp shrub of the genus Sedum in the family Sedumaceae, native to tropical Africa, evergreen all year round, adaptable, sun-loving, shade-tolerant, drought tolerant and barren, and the soil requirements are not strict, but it is better to cultivate loose and fertile sandy loam soil. It is not cold-tolerant and afraid of frost, so it can be put indoors for viewing all year round.

Swallow's palm is usually propagated by cuttings, and can be propagated at any time except during the dormant and low temperature period in winter. In particular, the large branches with side branches are selected as cuttings, which are easy to take root and the plants can be plump and formed quickly.

In spring and summer, turn over the pot and change the soil, and put a little long-acting fertilizer such as hooves at the bottom of the pot as base fertilizer. If it is moved to outdoor maintenance in summer, it should be placed in a semi-shaded place first, and then moved to strong light, and it is best to put it on the edge of the corridor, under the eaves, at the back of the balcony, and in a ventilated and rain-sheltered place. Usually watering should not be too much and too often, and then water when the surface of the potting soil is dry.

There is also no need for repeated topdressing. During the growth period, prune the branches that are too long and too dense to keep the plant symmetrical and the tree strong. In mid-October, move indoors, place in a sunny and warm place, and the minimum for wintering should not be less than 5, strictly control watering, and keep the potting soil from drying out.

Turn the pot once every half a month to avoid the deviation of branches and leaves, affecting the appearance, such as insufficient light, more attention should be paid to preventing damp heat rotten roots and defoliation.

The water and fertilizer are moderate during the growth period of the swallow palm, the indoor light is sufficient in winter, the air is fresh, the temperature is stable, and the robust old plants can produce small pink and white flowers in winter and spring, and have aroma. There is also a kind of small-leaved swallow's palm, also known as purslane sedum, the branches are purple-brown, simple and moist, the plant posture is swaying, and the leaves are stacked and handsome, which is suitable for expressing the style of ancient pile bonsai.

Replenish water, after the leaves of the jade tree are wilted, you need to water the soil to moisturize; Shading measures, it is necessary to transfer the jade tree to a ventilated and cool environment for maintenance, too strong light will cause the leaves to wilt; To dilute the fertilizer, you need to pour a lot of water into the pot to dilute the fertilizer, and too much fertilizer will cause the leaves of the jade tree to wilt.

1. Replenish the water for walking.

When the leaves of the jade tree are wilted, it is necessary to water the soil in time to make the soil in a slightly moist state. If the succulent is not watered in time, the roots of the jade tree will not be able to absorb water, making the leaves soft and drooping.

2. Shading measures.

If the jade tree is placed in a strong light environment for long-term maintenance, it will cause the leaves to be burned, making the leaves soft.

3. Dilute fertilizer.

After the leaves of the jade tree appear soft and wilted, it is necessary to pour a large amount of water to the roots to dilute the fertilizer, but long-term application of thick fertilizer will cause the roots of the jade tree to be burned, making the leaves soft. In the later maintenance of jade trees, it is necessary to apply diluted fertilizer every half a month to supplement nutrients.

4. Disease invasion.

The soft leaves of the jade tree may also be caused by the invasion of diseases, and it is necessary to spray a fungicide on the leaves. In the high temperature and high heat environment in summer, the resistance of the jade tree is poor, and it is easy to be attacked by black spot, aphids and other diseases, and the leaves will also appear soft and drooping after infection.

1. Prune cuttings.

After the jade tree grows, the branches will be too long and become weak, and the growth will not be good, which will also affect the normal growth. After finding that the jade tree is long, the branches that grow too long should be pruned, cut off the branches that are too long, and then divide them into several stem segments to ensure that there are growth points on each stem segment, and put them in a cool place to dry after dividing. These cut shoots do not need to be thrown away, they can be used directly as cuttings for propagation, and new plants can be grown.

2. Adjust the method of raising ants and protecting rotten.

A big reason for the problem of growing jade trees is improper maintenance, so it is also necessary to adjust the maintenance methods.

1. Increase sunlight: The growth of the jade tree itself needs a lot of sunlight, if the light is insufficient, it will affect the normal growth, resulting in the problem of growth. If it is due to this reason, the jade tree should be moved to a place with good light, and more light should be seen to ensure good light conditions, which can promote the recovery of the plant.

2. Control watering: The growth of jade trees requires an appropriate amount of watering, once the water is too much, it will also lead to the rapid growth of branches in the early stage, resulting in the situation of elongation. Be sure to control the watering, maintain a good amount of water, and never water too much.

3. Control fertilization: The growth of jade trees should be fertilized reasonably, once too much nitrogen fertilizer is applied, it will also cause growth, and it is necessary to control the suffocation of fertilization, remember not to apply thick fertilizer.

The jade tree is also called the swallow's palm, the flesh is evergreen, belongs to a kind of sedum family pulp fleshy shrub, because it means very good, full of gold and jade, auspicious wishes, brings a very good symbol, and its branches can gradually become lignified in the growth, the leaves are green and shiny all year round, just like the elegant bonsai bonsai, very ornamental value, than the ordinary pothos, rich bamboo, but also easy to raise, and can be made bonsai, so many friends like to raise a pot at home. A flower friend's jade tree has been raised for more than ten years, the branches and bowls are thick, and once they bloomed pink flowers, which are very beautiful.

But some friends raise the potted jade tree at home but refuse to grow, grow very slowly, last year was such a small plant, this year it seems to be such a small one, the leaves have become very small pieces, not green enough to be eye-catching, and even some leaves are yellow and small, what is going on? What should I do?

The jade tree grows slowly, yellow leaves, and it can be solved in one move, and the new leaves are rubbing and growing, and the plant is 3 times larger, and the pot is bursting

First of all, we all know that the jade tree grows thin and small, and the leaves are yellow, which is likely to be due to the lack of nutrients and nutrients, so it causes the growth to be particularly slow. Especially the one that has been raised with the ordinary soil outside, which has no nutrients and is easy to compact, and can not be shoveled with a shovel, and the surface of the potting soil is white, unlike the kind of fertile humus soil, which is soft and breathable and fertile.

Or two to three years have not changed the soil and pots, the nutrients in the potting soil have long been absorbed by the jade tree, there is no more nutrients for it to absorb, the growth is weak, even if there is no way to water and maintain, and there are no pests and diseases. It's time to repot it.

Yushu's repotting skills and methods

To change the pot of the jade tree, the first thing is to take off the pot, first stop watering for a day, loosen the pot around it slightly, and the soil with the roots will fall out, and the soil on the root system will be scattered, and then the root system more than 10 cm long can be cut shorter, and some old roots can be pruned to prepare for planting new soil for the jade tree.

What is the best soil to use to grow jade trees, that is, fertile humus, humus or peat, add some ordinary soil, some river sand or perlite, etc. Prepare a pot that is slightly larger than before, if the plants are larger. When planting, pay attention to compacting the potting soil to avoid easy skewing.

If the new soil is damp and slightly damp, you don't need to water it after planting. If the potting soil is relatively dry, after planting, water the root water once, put it in a cool and ventilated place, slow down for a while, do not fertilize for the time being, and then water the potting soil when it is dry, and it can be maintained normally after about ten days.

After changing the pot, keep the proper light, shade in summer, remember not to be exposed to the sun, you can bask in the sun more in other seasons, its leaves gradually become full, green, eye-catching, and will grow more new shoots and young leaves. The branches will also grow longer and thicker, and the plant will become healthier and more lush. The leaves of the jade tree are yellow and the leaves are small, 1 way to get it, the leaves are green, large and bright, and the young leaves are rubbing and growing!

The small jade tree has been planted for a year, the leaves are very large, if you want to fall, it should be that the leaves are too dense, the leaves are to store water, if the jade tree is going to fall, there should be a wooden stick to straighten the tree body, and then prune the leaves, so as to reduce the weight of the tree body.

This is the time to help the tree prune its branches and then consolidate the soil.

If it is about to fall, you should immediately stick a piece of wood next to it and tie it to the wood with a rope.

After the jade tree is repotted, you can change the soil and repot it again, because it may be caused by the discomfort of the previous soil pot, and you can also control the watering, adjust the light, and increase the nutrients in the later stage to deal with this problem comprehensively, and the growth of the jade tree will be very smooth in the later stage after all the factors are completely solved.

1. Change the soil and change the pot

After changing the pot, the jade tree wilted may be a problem with the previous soil and pot, you can re-give it a pot with better drainage, loose and fertile soil, and use a slightly deeper pot to breed, which is more conducive to the growth of its root system, and can absorb more water and nutrients in the soil, so that it will not wilt after a period of time.

2. Control watering

The jade tree is a plant that is afraid of waterlogging, and frequent watering for a long time will make its roots rot, so that it will encounter problems in the process of growth, and the leaves wilting and yellowing is one of the manifestations, and the frequency of watering can be slowly reduced in the later stage, which can alleviate the situation of leaf wilting and make its plants grow more densely.

3. Adjust the lighting

The jade tree is exposed to the sun for a long time and does not let it be exposed to the sun for a long time, it will be wilted, generally it should be placed in a cool place that can contact the astigmatism is the best, which is not only conducive to its photosynthesis, but also conducive to the growth of its plants, and will alleviate its wilting situation after adjusting the light.

4. Increase nutrients

If the soil is too poor and there are no nutrients in the process of growth, the leaves of the jade tree will wilt, and some nutrients can be added to it after changing the potting soil, which can not only speed up its growth rate but also alleviate the phenomenon of wilting, so that the jade tree can absorb more nutrients and grow healthier.