Will a broken computer hard drive cause it to be unable to connect to the Internet?

A broken hard drive will result in inaccessibility to the system.

Possible reasons for not being able to access the internet are:

If the NIC driver is not installed, if it is a network card integrated by the motherboard, update the motherboard driver directly, and if it is an independent network card, update the NIC driver again.

The network parameters are not set, if it is a router surfing the Internet, the IP can be set to automatic.

The network itself is a problem, in this case, try to connect to the network with other terminals.

If the hard disk is broken, the data of the system will not be read, or the reading will be obviously slow, so there is no direct relationship between being able to access the Internet and the hard disk is broken!! But if you can't open the web page if you have been stuck in **, it may be that the hard disk can't read the data and is stuck in **,!

What should I do if my computer's hard drive is broken? For mobile hard disks, I believe that everyone often uses them, and it is also a relatively common storage device, but many people often accidentally format or delete it by mistake when operating the hard disk, resulting in the loss of data. So for these lost data files, can they still be recovered?

Hard Drive Data Recovery Method!

In fact, for files formatted on the hard disk, it is generally possible to recover, because when the computer deletes the file, it generally marks the deleted file as "free", and does not really delete it, but uses another form to store the file. So how do we recover files formatted in this case? How can I get my lost files back?

Step 2: Select "Where the original data file is stored", here you can directly select the disk where the corresponding data was deleted by mistake, and click the "Start Scan" recovery option below to automatically scan.

Step 3: After the scan is over, you can select the files we need to recover according to the file path or file type, and click the "Recover" option below to retrieve the lost files.

The above is an introduction to the relevant methods and skills of data file recovery after hard disk formatting, I believe you also have a certain understanding. In order to be able to retrieve the lost files, we can repair the data loss in turn by following the above steps, and at the same time, we also need to avoid the data files being overwritten.

If your computer's hard drive is broken, your computer won't turn on. It does not result in no network.

If the hard disk has a physical failure, depending on the situation, most of the cases are difficult to read, and some even can't turn on, of course, don't think about surfing the Internet.

Summary. When you replace the hard drive, everything is gone.

At this point, the system needs to be reinstalled. This is just the first step.

After the system is installed, you also need to reinstall all the hardware drivers before the computer can work properly. If you can't connect to the Internet, it is obvious that there is a problem with the driver of the network card (not installed or installed incorrectly).

After installing the driver, a similar situation will occur, which may be a problem with the network settings. You need to enter the password provided by the operator to connect to the network normally through the network cable.

After changing the hard disk of the computer at home, I can't connect to the Internet, what's going on?

When you replace the hard drive, everything is gone. At this point, the system needs to be reinstalled. This is just the first step.

After the system is installed, you need to reinstall all the hardware drivers before the computer can work normally. If you can't connect to the Internet, it is obvious that there is a problem with the driver of the network card (not installed or installed incorrectly). After installing the driver, there will be a similar situation, but the Zen state can be a problem with the network settings.

You need to enter the password provided by the operator to connect to the network normally through the network cable.

Remove the network card driver and try reinstalling.

1. First find out the motherboard model you are replacing and drive your motherboard and the network card integrated into the motherboard. Next, if you have adsl, you need to create a virtual dialer. No group 2 to change the hard disk to reinstall the system.

3. Take a look at reinstalling the network card driver. If the NIC driver is delayed, reinstall the driver.

4. The system does not recognize the computer user name, and the network card driver is not installed! Then check the local CUHK connection IP agreement! 5. After fixing the HDD on the chassis, connect the data cable and SATA data cable, and plug the data cable into the SATA of the motherboard and sell it vertically.

Dear, I hope mine is helpful to you.

It is possible that there is a problem with the hard disk, and the system has an error when it self-checks the hard disk, and it is frozen.

You can not connect this hard disk first, use the original mechanical hard disk to boot the system to the desktop, and then connect to this solid state drive, see if it can be recognized normally, can partition and format, and you can also use hard disk detection software to detect whether there is a problem with the hard disk.

If it can be recognized normally in the Windows environment, can be used normally after formatting, and the problem cannot be detected, it should be fine. If it can't be passed, it means that it is bad, and the return should be hurried. Of course, it may also be a problem with the motherboard's interface and cables, although it is less likely, it should also be ruled out.