How to deal with moldy wallcovering, how to deal with moldy wallcovering?

If the moldy area is large and the mildew spots are more and serious, tear off the wall cloth again, remove the mold spots on the wall and re-paste the wall covering.

The lower part of the window sill or the exterior wall seepage causes mildew, and the wall base layer is generally soaked very soft, and the wall base layer needs to be removed, and the putty is re-batched, and the base film is brushed and then pasted with the wall cloth. When the mold first appears, it must not be scrubbed with a wet towel, the mold spores will follow the wipe traces, and the growth of mold requires water, so as to provide it with enough water to grow again. Mold on the surface of the wallcovering will get worse and worse.

Precautions for sticking wall coverings.

When pasting the wallcovering, remember to do the vertical line pay-off to ensure that the wallcovering is pasted vertically, and it is conducive to the wallcovering edge work.

If it is a fibrous wall covering, avoid sticking to the dust of the construction. In case of contamination, it must be re-applied.

The glue must have a proper viscosity and must not have impurities, otherwise it will cause problems with flatness.

The parquet of the cutting surface should be accurate, if it is difficult to match the flowers, check whether it is a printing problem for the wall cloth itself, carefully check whether there is a glue overflow, and wipe it clean with a clean cloth at the first time.

The above content refers to People's Daily Online-Wallpaper moldy tricks to remove it without worrying.

<> "How to deal with mildew and blackening of wall coverings.

1. If the wallcloth is moldy and black, then you can dip it in an appropriate amount of soapy water to wipe it, which can effectively wipe the mold on the wallcovering.

2. You can use bleach to wipe the test, wear gloves before wiping the test, and pay attention to dilute the bleach before use, or it is not easy to fade the color of the wallcovering.

3. It can also be treated with a special mold remover, according to the instructions, as long as the mold remover is wiped on the mildew and blackened place.

What are the precautions for sticking wall coverings.

1. The temperature will be relatively high in summer, and at the same time, it will also speed up the evaporation of water, which is easy to cause a wall cracking and chalking.

2. Summer will also be relatively hot, so it is easy to cause a hanging tear spot on the wall, and it is easy to dry and harden, and it will be difficult to maintain in the later stage, and this cost is also relatively high.

3. Before construction, prepare tools in advance, such as key oranges or wet towels, and watering cans. Due to the high temperature in summer, the indoor temperature will be relatively dry, so as to ensure that the indoor humidity. If the air is dry, it will cause the moisture loss of the glue too quickly, and the two sides will stick together.

Summary: How to deal with the mildew and blackening of the wall cloth is introduced here, and it can be treated according to the above methods, and in the processing process, it must be cleaned up, and the details should also be paid special attention to.

1. If the mildew spot is not big, you can use a rag to wipe gently, or you can wipe it with soapy water or detergent, and if it is more difficult to wipe, you can dip it in some disinfectant to scrub, and then use an electric fan to dry.

2. If the area of mildew spots is large, bleach can be used to dilute it with water, but this method will cause the wallcovering to fade, and it is generally not recommended to use it. Mold removers that specialize in treating mold on walls can be used.

3. If the moldy area of the wall cloth is large and the spots are serious, you can only take the method of re-pasting the wallpaper.

What should I do if the wallcovering is moldy? First, shovel down the wall coverings and renovate them, or re-paste the wall coverings.

Remove the mold spots on the wall (if you can't remove it, paint the wall from the beginning) and paste the wall cloth from the beginning. The lower part of the window sill may be said to be moldy caused by water seepage on the exterior wall, and the bottom layer of the wall will generally be soaked very softly, and the bottom layer of the wall needs to be removed, and the putty should be batched from the beginning, and the base film will be brushed and then pasted with the wall cloth. Use a dry towel to get rid of the mildew little by little, and then spray it on the wall cloth at the foot of the wall with colorless disinfectant.

Of course, the treatment method of moldy wall cloth can not be grabbed in this way, and it is good to re-paste it.

Add salt and white vinegar to warm water and rinse it.

If the wall cloth is moldy, the best way to deal with it is to replace it and buy a new one, or use colored bleaching powder and wash it.

This can't be helped.

Can only be re-pasted.

After all, this is all due to the weather.

It's not something else, you need to understand it yourself.

Just moldy: The mold spot is not big, just moldy, it is recommended to use a damp and clean rag to gently wipe the moldy place, or wipe it with soapy water, detergent, etc., and then use the mold remover to kill the mold and repair the mold.

Large area: if there are more spots and the mold time is too long, you can only replace the wall covering, you can use mold remover or disinfectant to remove the mold, and if you can't remove it, you can only re-approve the wall and then paste the wall covering.

Wall water seepage: If it is due to water seepage in the wall, or the mildew caused by the water soak in the lower part of the window, the wall putty should be shoveled off and the wall surface should be re-approved.

The wallcovering is moldy, how to deal with all the mold? It must not be wiped off, just give him the next re-glue brush.

Remove the mildew wall covering, remove the mildew spots on the wall, do a good job of cold and warmth, re-scrape the white, sandpaper polish and smooth, blow off the dust and then subsidize the wall covering.

If the wallcovering in your home is moldy, my suggestion is to redecorate and check the cause of the moldy place, because the wallcovering in your home must have a reason for the mold, and only by solving the main problem, the wallcovering you put on your home will not have the problem of mold.

I think you should put a layer of wallpaper, or re-scratch the white, and then put on the wallpaper. Pay attention to ventilation so that the walls do not get moldy.

Wall covering, also known as wall covering, is a fairly widely used interior decoration item. Over time, when the wall covering is left unattended for a long time and does not allow sunlight, bacteria can grow and mold. Mouldy wallcovering can be treated with normal and special cleaning as well as a new wallcovering method.

For the normal cleaning method, prepare a brush first, and a toothbrush is generally best. Use a toothbrush to remove the mold from the wallcloth, and then wipe it with alcohol and a soft cloth. Doing so will not only clean the wallcovering from mold, but it will also keep the wallcovering dry and avoid mold growth.

This method is suitable for those with a relatively small mold area and the mold is not particularly stubborn.

If the mold on the wallcovering is severe, it is difficult to clean it with the above methods. In this case, a special cleaning method can be used. The principle of this method is to use biochemical reactions to achieve this.

You can use a mold remover called meiboss to treat mold on your wallcoverings. Spray it on the moldy part of the wallcovering, let the mold undergo a chemical biological reaction, and wait for the mold on the wallcovering to decompose naturally, you can achieve the effect of removing the mold. When using this method, you need to take self-protection measures, such as wearing gloves and masks when using them, to prevent the mold remover from causing bad effects on the body.

In order to avoid mold on the wallcloth again, after removing it, spray some meiboss on the wallcovering, which has a certain preventive effect.

If the above methods still can't solve the problem of moldy wallcovering, it is recommended to throw away the moldy wallcloth and buy a new wallcovering, preferably moisture-proof, because most of the moldy wallcloth is caused by the dampness and long-term sun.