How to deal with moldy wood furniture? Why is wooden furniture always moldy and mildew

Quicklime powder can be placed between the furniture and the floor.

Solid wood furniture is more susceptible to moisture, and wood is easy to swell and mold when wet. Therefore, the part of solid wood furniture against the wall should be placed about 1 cm away from the wall to avoid absorbing too much moisture in the wet season. In addition, the furniture should be waxed regularly, every 6-12 months, with a special furniture paste wax to wax the furniture.

Before waxing, the old wax should be wiped off with mild, non-alkaline soapy water.

If you encounter moldy solid wood furniture, you can first use a clean soft cloth dipped in a neutral detergent or a special furniture cleaner to remove it. Then lightly apply a layer of furniture wax or essential oils to the musty area, and place a bar of soap or a gauze bag filled with sun-dried tea residue in the musty area to help eliminate the musty smell.

In the humid spring and thunderstorm summer, the daily cleaning of solid wood furniture can be used to use a clean soft cloth dipped in a special furniture cleaner to gently wipe to remove dirt, this kind of cleaning agent can form a protective film on the surface of solid wood furniture, to a certain extent to prevent water vapor from penetrating into the interior of wood furniture. In drier seasons such as autumn and winter, gently wipe the texture of the wood with a slightly damp soft cloth to maintain the moisture content of solid wood furniture to prevent cracking. Be careful not to wipe with a dry cloth to avoid rubbing the flowers. (

Solid wood furniture itself is not subject to special moisture-proof treatment, and this should be paid attention to during maintenance, and after the solid wood furniture is damp, the changes are obvious, the surface will change color and even breed mildew, and if you do not deal with it for a long time, it will lead to expansion and deformation and cracking of the damp place.

The maintenance of solid wood furniture is more cumbersome, it belongs to high-end furniture, daily maintenance needs special detergents for maintenance, and needs to be waxed regularly, moisture-proof can be put in a pack of activated carbon for dehumidification.

If it is already moldy, you can try to remove it according to the following methods.

1. The mildew on the old wood can be removed with milk, alcohol, ammonia, potassium permanganate, and sodium bisulfite. Caused by the wood absorbing too much water. This is a kind of particleboard or high-density board, high water absorption, this phenomenon is difficult to deal with, wipe off mildew, eliminate water sources, keep ventilation smooth so that it is naturally dry, there is water inside, and it is useless to deal with it outside.

2. You can try to use mold removal spray, which can also be said to be bleach, which is a kind of oxidation bleaching that uses the strong oxidation of hypochlorous acid. Mold and blackening, which is mainly caused by the melanin metabolized by the mold and its mold on the wooden board, the use of detergent is effective, but generally it will also leave more obvious black spots.

If the wooden furniture is moldy, wash it if it can be washed, remove the stain if it can't, and often dry it in the sun to kill the mold. There are many ways to prevent mold, and the main reason for mold in furniture is that the environment is humid, and the humidity of the air is relatively large, which is easy to breed bacteria. Therefore, we usually ventilate and expose the furniture to sunlight to avoid it in a humid environment.

The four main factors of mold growth:

First, mold must be in contact with the air, it is difficult for mold to reproduce under vacuum conditions, such as the use of vacuum aluminum film packaging for food packaging is not moldy, second, mold needs to be in a suitable temperature and humidity to multiply in large quantities, such as dark and humid places, water molecules will penetrate into the product or attach to the surface of the product, resulting in excessive product humidity, this reason is the highest factor of mold, but it is a link that can be controlled at low cost artificially, third, mold is a kind of microorganism, but also needs nutrients, For example, the starch and protein in the glue, the oil in the leather and the fiber in the wood are all nutrient sources for mold, and fourth, mold is everywhere, in the air, in the dust, in the soil, in the sweat, especially easy to stay on some uneven surfaces, such as furniture joints, fabric and wood surfaces.

In fact, mildew prevention is very simple:

1. Bamboo and wood antifungal agent.

Second, the surface is painted, and the paint is added with anti-mildew agent.

I have more experience in this area and hope to help you.

The solutions to mold on wooden furniture are as follows

Furniture mold can be wiped with vinegar water. White vinegar to wipe wooden furniture is not only harmless but also beneficial, not only to get rid of the smell of detergent, but also to make the furniture as bright as new, with vinegar to wipe the furniture is good, because the molecular structure of vinegar is relatively large, so its molecules can encompass the paint molecules and other molecules in the furniture.

White vinegar is a type of vinegar except for 3 to 5 percent acetic acid.

It contains no or very few other ingredients other than water, and is made by fermentation of distilled liquor, or directly blended with food-grade acetic acid, colorless and simple in taste, and is used in cooking, especially in Western food, and is used to make kimchi The sour taste comes from vinegar rather than fermentation.

After each wipe of wooden furniture, mix a glass of vinegar into a gallon of water, and use it to scrub the furniture, which can not only remove the smell of detergent, but also make the furniture shiny as new.

If you can't try it with a fine brush, if the range of mold is relatively large, then use a wet towel to vigorously wipe the moldy location to remove the moldy spots, but the bed may be more prone to mold if it is stained with water, so you must remember to dry and ventilate after wiping.

1. Spray the brush or sponge with anti-mildew cleaner to clean the mold ash on the wooden frame thoroughly. Wipe down any mold and let it dry in the natural environment.

After the separation, the wooden frame is dried, and then sprayed with a spray gun, the pressure of the spray gun is adjusted around the right, considering that the wood has become moldy, the dose should be increased, pay attention to the control of dead ends, must be sprayed all, as long as all sprayed, the wet solid wood is not easy to grow mildew in time. It will form a protective film on the surface of the wooden frame, and the mechanical sterilization will not seep or wander, and will not be consumed by microorganisms. At this time, wait for the wooden frame to dry a little before packaging, to reduce the chance of mold again.

3. If the furniture leather fabric is moldy, wipe it with anti-mildew cleaning cream, and then spray anti-mildew agent, which must be used exclusively to ensure the treatment effect.

4. If it is a moldy treatment method for fabric fabrics: first use a horsetail brush to dip it in textile anti-mildew detergent, thoroughly clean the mildew ash on the fabric, wait for 15 minutes to air dry, spray an anti-mildew antibacterial agent to resist cracking, and then pack it after air drying.

5. When packing, in order to reduce the probability of mildew again, anti-mildew and deodorant desiccant should be added to the packaging bag or carton to reduce the probability of damp mildew of the product.

Remove the mold from the furniture, and then disinfect the mold with 95% alcohol; If there is mold, wipe it off with a special mold rag and brush it with varnish; Wrap lime or burrower charcoal in a cloth and place it indoors. Here's how to deal with it:

Move the moldy furniture out, use a clean towel or soft cloth to remove the mold on the furniture, then use a clean towel or soft cloth dipped in 95% alcohol to disinfect and clean the mold, then we use sandpaper to grind, and finally we spray the same color paint to dry it and then use it. Scattered.

Wet a towel to remove the mold spots. Wet beds are more susceptible to mold, so be sure to wipe them dry and ventilate. If there is mold, it is necessary to wipe it with a mold rag that rots the dead door, and brush the varnish again after wiping, and pay attention to opening the window for ventilation.

You can use lime or charcoal to absorb moisture, and you can wrap lime or charcoal in cloth and place it indoors on rainy days or rainy seasons to keep the air dry. Place H-10 anti-mildew drying packs inside the finished solid wood furniture to reduce the risk of mildew due to moisture.

Many household furniture is made of wood, because of the variety of styles and styles, suitable for a variety of decoration styles, so it is still very popular. However, wood is easy to absorb very, if there is moisture in the home, if it is not ventilated in time, the wooden furniture will be easy to mold and mildew after a long time, and it is difficult to remove the moldy wooden furniture, so it is best to pay attention to frequent ventilation at the beginning.

When dealing with wood furniture mildew, you can first remove it with a wood mold remover, spray it directly on the moldy place, wait for the mold stain to slowly decompose, and wait for the mold stain to disappear after drying. If the mold area is relatively large, you can use a damp towel to vigorously wipe the mold area to remove the mold spots. However, if wooden furniture is stained with water, it is more likely to become moldy, so be sure to remember to dry it and ventilate it.

Place a bar of soap or a gauze bag filled with dried tea leaves in the moldy area to help eliminate the musty smell. In order to prevent the growth of mold, you can regularly paint and varnish wooden furniture, spray anti-mold agents, and wax, which can play a role in preventing mold.

You can bask in the sun, but avoid prolonged exposure, otherwise the wooden furniture will fade. Furniture contaminated with mildew can be soaked in thick soapy water, then taken out with soapy water, and left to dry in the sun for a while, and then soaked several times. After removing the musty smell, rinse off with clean water.

Alternatively, use a clean, soft cloth dipped in a mild detergent or a special cleaner for furniture to remove first. Then lightly apply a layer of furniture wax or furniture-specific essential oil to the moldy area.

Solid wood furniture is more susceptible to moisture, and wood is prone to swelling and mold when it is wet. Therefore, solid wood furniture should be placed about 1 cm away from the wall so as not to absorb too much moisture during the rainy season. In addition, the furniture should be waxed regularly, and the furniture should be waxed with special furniture paste wax every 6-12 months.

Before waxing, wipe off the old wax with mild, non-alkaline soapy water.

During the humid spring and summer thunderstorms, the daily cleaning of solid wood furniture can be gently wiped off with a clean soft cloth dipped in a special furniture cleaner. This cleaner can form a protective film on the surface of solid wood furniture. to prevent water vapor from penetrating into the interior of wooden furniture to a certain extent.

In drier seasons such as autumn and winter, gently wipe along the grain of the wood with a slightly damp soft cloth to maintain the moisture content of solid wood furniture and prevent cracking. Be careful not to wipe with a dry cloth to avoid rubbing the flowers.

You can spray the anti-mold cleaner on a brush or sponge to clean it first, thoroughly clean the mold ash on the wooden frame, and let it dry in a natural environment. After the wooden frame is dried, spray the antifungal agent with a spray gun. The gun pressure is adjusted to the left and right.

Considering that the wood has become moldy, the amount should be increased. Pay attention to the cleaning of dead corners, and spray them all. After timely treatment, solid wood is not easy to grow mold.

At the same time, you can also wipe the moldy area clean with a neutral anti-mold wood cleaner, and then wait for it to dry naturally, and then clean it thoroughly with a special spray gun. You can put soap or tea bags in areas where the musty smell appears to remove the musty smell.