How to get the correct brushing method of latex paint? Do any netizens know?

According to the manual, a special brush is generally used, and then brushed from top to bottom, and then brushed a second time after brushing. The first pass is equivalent to a primer, and the second pass is equivalent to smoother adhesion.

The correct latex paint brushing, first clean the wall base, the first time to brush the primer, before the latex paint is not completely dry, it is best not to repeat the brush, the painting interval is more than 4 hours, and then after drying, then two times of topcoat, after the second time, if there is still a rough and uneven place, use fine sandpaper to polish it, and then put on the last topcoat.

The correct latex paint is painted, the primer is generally brushed once, and then painted after drying, there are rough and uneven places in the middle, and it also needs to be sanded with fine sandpaper, and then painted.

How to brush latex paint correctly, so that the latex paint will be better, have you learned?

There are tips for repairing latex paint. Latex paint is a commonly used decorative material in modern home wall decoration. Latex paint paste is added when manually blending, which must be mixed evenly with a latex paint mixer.

After the real latex paint is left for a period of time, the surface will settle and agglomerate. When you use it again, you'll need to remove the clumps from the surface to prevent the walls from affecting the appearance. It is also a way to identify defective products.

Defective latex paints only form a thin film and are very fragile.

1.We can use tools such as shovels to shovel out the protruding mortar blocks hollowed out from the wall, or we can use brooms, vacuum cleaners, etc. Dust and other dirt should be removed from the walls, and the flatness of the walls should be checked with a level, etc.

If there are local potholes in the wall, you can repair them with plaster first. Joints of walls of different materials need to be reinforced with mesh cloth. If there is sand on the wall, then we need to paint the wall twice and so on.

Stir the paint and water well and let it sit for 20 minutes to see if the bubbles disappear to avoid pinholes or small bubbles after the latex paint is applied to the wall.

2.Latex paint is a water-based paint that is basically non-toxic. Generally speaking, as long as you buy a regular brand of latex paint, you can move in after a week of normal ventilation after completion.

If there are elderly people and babies in the house, it is recommended to extend the ventilation time for the health of the family. After the putty is dry, we can smooth the surface with a sander. If sanding with sandpaper, fine sandpaper is required.

Wall putty generally needs to be scraped 2-3 times, and it needs to be sanded after each scraping.

3.We use tools such as brushes or rollers to evenly apply the primer to the wall. The primer and topcoat should be ancillary products, and there should be no leakage when painting.

Regarding the decoration process and coating thickness, the designer should clarify the pre-finished product samples and on-site decoration samples to the decoration workers, and change the color of the middle layer and the surface layer if necessary to make it easy to identify each coating. The amount of paint should be applied faithfully in accordance with the prescribed amount, and attention should be paid to the corners and recesses to avoid under-application. The above is the answer to the question of what tips you can use to paint latex paint.

Here's how to brush latex paint:

1.First of all, you need to buy suitable painting tools and brushes;

2.Before brushing latex paint, it is necessary to repair the joints and level them;

3.Then mix the latex paint with water;

4.Stir the paint and water evenly and then let stand for 20 minutes to achieve the purpose of defoaming;

5.Moisten the tool with water first;

6.Paint with one bottom and two sides.

When painting latex paint, you should choose to use warm water and latex paint to stir, first need to clean the surface, and then gently brush it with a brush, you can also spread some newspaper around, and then use a brush to brush.

The trick of brushing latex paint is to determine whether it is suitable for brushing latex paint before brushing, you can try it in some small places first, when brushing latex paint, you can choose to add some water to the latex paint, and you must pay attention to carefully brushing the screen with a brush when brushing latex paint, and keep it flat and clean.

Latex paint is very familiar to everyone and is often used for home renovation. However, for different materials made of pure leather, different housing, the effect of painting is still different. Therefore, in order to ensure the quality of latex paint, construction operation is also a very important part.

Here is a brief introduction to the correct steps for painting the walls directly with latex paint and painting latex paint.

As long as the original wall is coated with latex paint and the wall surface is smooth, latex paint can be applied directly. The color of the new latex paint can be determined according to your needs. Just prepare the rollers and brushes and pay attention to evenness when painting.

In addition, each color should be prepared in sufficient amount, otherwise there will be color differences when the latex paint is not enough.

When drawing an old wall, clean the old wall first. For wall stains, you can polish them directly with sandpaper and then brush them with latex paint. If the wall is dirty, you should remove all the original putty, brush it again and apply latex paint.

For the powder on the old wall, it should be completely removed, and then a layer of white cement should be used as the base layer. In addition, if the surface of the wall is smooth, it can be polished.

When brushing latex paint, apply the primer first, and the primer is the primer. If there is no primer, it will take a long time, and there will be powder removal, mildew and even discoloration on the walls. For brushed walls, it is very troublesome if you need to carry out a second repair of the pants.

If it is composed of one piece, the entire wall will have obvious color difference, and the appearance will be reduced; Therefore, the wall repair is better, and it is better to have the entire wall. All patched.

In order to prevent color difference, when applying latex paint, you can choose latex paint of the same brand specification, and it is well prepared, it is better to paint the entire wall in one color.

Can latex paint be brushedAnd, again, latex paint can be brushed. In fact, brushing latex paint is a relatively simple job, as long as the owners collect more information on the Internet and study well, it is easy to learn.

You can get it for free

The quality of the latex paint construction process will not only have an impact on the overall environment of the home, but also make the occupants feel very bad. SoHow to brush latex paintRight? Below we will bring you the correct process of brushing latex paint, hoping to help you grasp some principles and essentials.

How to paint latex paint correctly?

The correct process of brushing latex paint 1, big inspection. Comprehensively check whether the cement wall that needs to be painted in the blank room is solid and smooth. If the plastering layer on the wall is not strong enough or there are large cracks and holes, it is recommended to complain to the developer or the property to talk about it and ask it to be redone.

Individual holes can be filled with plaster if repaired by yourself.

The correct process of brushing latex paint 2, finished product protection. There will be dust when dealing with the wall, and it is inevitable that putty, latex paint or other glue will drip off, so be sure to do a good job of protecting the finished decoration in the room in advance.

Brush the correct process of brushing latex paint with bumper 3, and prepare before scraping putty. Ensure that the wall is solid and flat, clean the wall with a steel brush or other tools, and make the cement wall as free of floating and noisy soil as possible. Roll the concrete interface agent on the wall, try to be as uniform as possible, and after it dries (generally more than 2 hours), you can scrape the putty.

The correct process of brushing latex paint 4, scraping putty (please choose water-resistant putty). The flatness of the wall should be measured before scraping putty (with a detection ruler of more than 2m) to determine the method of scraping putty. Generally, the wall can be scraped with 2 putty, which can not only level but also cover the background color.

Putty with poor flatness needs to be scraped several times locally. If the flatness is very poor and the wall is heavily tilted, you can consider scraping the plaster first for leveling, and then scraping the putty. The interval between each batch of putty scraping should be more than 2 hours (after the surface is dry).

The correct process of brushing latex paint 5, polishing putty. After the water-resistant putty is fully strengthened (5-7 days), it becomes extremely solid, and it becomes extremely difficult to polish it again. Therefore, it is recommended to start putty sanding 1-2 days after scraping putty.

Sanding can be done at night, with a light bulb of more than 200 watts close to the wall, and check the flatness while sanding.

The correct process of brushing latex paint 6, brushing the primer. After cleaning the dust on the surface of the sanded putty, the primer can be applied. The primer can be applied once, making sure that it is even, and after it has dried thoroughly (2-4 hours), you can proceed to the next step.

The correct process of brushing latex paint 7, brushing topcoat. The topcoat is usually brushed twice, with an interval of more than 2-4 hours between each pass (depending on the drying time) and allowed to dry basically. After the second coat is brushed, it takes 1-2 days to completely dry, and before the latex paint is completely dry, attention should be paid to waterproof, drought-proof, and sunscreen to prevent problems with the paint film.

The correct process of brushing latex paint 8, acceptance. The living wall should be solid, flat, vertical and vertical, no cracks, no holes, uniform color, full paint film, and pay attention to the protection of the finished product.

The above is for you, how to paint latex paint correctly? The whole content of the correct process of brushing latex paint.

Step 1, first of all, you need to buy paint tools and brushes, in the selection of tools, you need to choose a better quality tool, can brush out a thicker coating, so that you can cover the original bottom color, but also to ensure the durability of the paint film, can withstand repeated scrubbing.

Step 2, when brushing latex paint, you need to make the wall wear and uneven places, patch and level, in the wall cleaning, you can use glass special detergent or water to remove the dust and dirt on the wall, and to dry. If there are holes such as nail holes on the wall, putty can be used to fill them.

Step 3, the latex paint mixed with water, according to the proportion of water added to the roller coating, generally controlled to 20% to 30% according to the volume ratio is an appropriate proportion, if there is too much water, it is easy to cause the latex paint film formation is poor.

Step 4: Stir the paint water evenly and let it stand for 20 minutes to see if there is a bubble elimination, so as to avoid needle holes or small bubbles after the latex paint is on the wall.

Step 5: The still time has passed. It's time to paint. Then moisten your tools with water first, such as the wool brush and roller in the corner of the shady corner, first moisten with water, and then dip the material. The next step is painting.

Step 6, the latex paint is painted according to the standard process, which is painted in a bottom-to-bottom and two-sided way.

Go buy Metall Lacquer's latex paints, each of their products has detailed application instructions.

Latex paint is one of the many paints that are favored by owners because of its advantages such as health, environmental protection, diverse colors and simplicity. Let's take a look at itHow to brush latex paint well, what to pay attention to when brushing, I hope it will help you.

How to brush latex paint wellStep 1.

Get construction tools, good tools can do the job. Especially for brushes and lacquers, *** is preferred. Thanks to the quality of the product that gives a uniform effect on the walls, the color saturation of latex paint is high and can withstand repeated cleaning.

How to brush latex paint wellStep 2.

Before painting, we have to do a basic treatment of the wall. If there is a protrusion on the wall, we should smooth it; If there are spots on the wall, gray layers are piled up, clean; If there are some nail holes in the wall, you can use putty, patch, after cleaning, and wait for the wall to dry.

How to brush latex paint wellStep 3.

According to a certain proportion, the mixing ratio of water and latex paint is about 20-30%; If it has too much water, the latex paint will weaken and it will not form a film!

How to brush latex paint wellStep 4: God answers.

After mixing the water and latex paint with a wooden stick, let it sit for about 20 minutes. This is to eliminate air bubbles in the water. If you don't want small bubbles to end up on the wall, wait until the bubbles are gone.

How to brush the milk You Chunhui glue paint wellStep 5.

Once the paint is ready, you can wet the application tool. Especially with a brush that keeps the wool soft with your trouser hands. The rollers can also be pre-wetted for better brushing.

How to brush latex paint wellStep 6.

If you paint your own latex paint, it is recommended to use the double-sided brush method.

1. Brush the bottom knee first, so that it can improve the characteristics of the wall surface to improve the adsorption of the surface of the wall, then the effect will be better.

2. During the operation, if you feel that the wall is not smooth enough, or there are some small particles, you can use sand and water 600 to clean the wall slightly.

3. After the first time, brush every 2-4 hours and cycle like this. Some buddies will say that the concept of time is not strong, so you can press it with your finger and if it doesn't feel sticky, you can paint it again.

1. The general rule is from left to right, from top to bottom.

2. The operating speed of the brush must be constant and uniform, and the force must be uniform to ensure uniform coating.

3. Don't apply too much brush from one side to the other to avoid foaming or leaving brush marks.

4. When brushing the upper part, the oil should be small, the action should be fast, and the brush should be brushed many times.

5. The construction site must be well ventilated.

6. When resting, the brush should be immersed in solvent or washed to dry.

You can get it for free

Latex paint is a kind of paint used in home decoration, and it is also one of the indispensable decorative materials in home decoration. The use of paints and coatings in decoration is essential, and latex paint is one of them. So, how to apply latex paint is good, and what to pay attention to when applying latex paint?

Introduction to latex paint

Latex paint is a water-based paint, and the type of latex paint depends on the raw materials used in production. The latex paint of the general household is classified according to its use environment, which is divided into interior wall latex paint and exterior wall latex paint. Interior wall latex paint has the advantages of easy brushing, waterproof, soft color and luster, and non-toxic paint film.

Exterior wall latex paint has the advantages of toughness, mildew resistance, waterproof, ultraviolet resistance and so on.

How to apply latex paint

1.Before brushing the latex paint, place the putty on the base layer. Large-area putty Again, large-area putty refers to the mixture of white cement and glue at 10 to 4.

After the base layer has dried the decompensatory beam, sandpaper is applied to it, and then the putty is completely applied to it. It is necessary to pay attention to the putty at this time. According to 10:

4 to 2, the mixture is white cement and glulam powder. Proportional distribution. After the panel of the base layer is basically flat, it is finely ground to ensure the smoothness of the substrate.

2.Pour the shivering latex paint into a larger container and mix well to avoid uneven color distribution. It should be noted that when the consistency of latex paint is too large, it can be reused by stirring it into a fluid.

If the consistency of the latex paint is too great to stir it into a liquid, no more than 8 of the paint thinner can be added, and water cannot be added to avoid applying strength after applying the latex paint.

3.When latex paint is applied, it is usually applied from left to right, top to bottom, and from inside to outside. This will ensure the uniformity of the latex paint.

The coating speed of latex paint should be consistent and uniform to ensure the uniformity of latex paint coating. It should be noted that the number of times latex paint is applied after the pre-travel should not be too many to avoid scratches or bubbles.

4.When applying latex paint, a small amount of oil can be applied to the brush, which can be applied quickly and avoid sagging. It should be noted that the latex paint used in the decoration of the room should use the same batch of latex paint to avoid the effects of the room decoration due to inconsistent colors and consistency.

Pay attention to the latex paint brush

Brush latex paint note 1) When latex paint is stored and used, its time should not be too long. It is best not to exceed six months from the date of manufacture. Storage should be sealed, and the temperature should be controlled at 0-40 degrees.

Note 2) In the process of painting latex paint, it is best to keep the ventilation of the construction site, so that the latex paint can dry as soon as possible, and the harmful substances in the living room can be discharged outside.

3) At the end of painting, the latex paint should be immersed in solvent, or washed and dried to prevent the latex paint from solidifying on the brush and affecting the secondary use.

Pay attention to brush latex paint, pay attention to brush latex paint, pay attention to brush latex paint.

You can get it for free