Let s talk about the precautions for paving the floor in the living room

One of the precautions for the paving of floor tiles in the living room: floor tile specifications.

If the living room area at home is more than 30 square meters, it is best to choose 80*80 bricks, if it is less than this area, you can choose 60*60 specifications below, but it is best not to be less than 40*40;

But if it is a large size of tiles paved on a small area of the ground, it will make the room have a sense of incongruity, just like a thin person wearing a large size of clothes, and vice versa: a large area of the floor is paved with small size tiles, which can make the room look more crowded, in short, we can choose shoes that fit our foot size is a good shoe.

Precautions for floor tile paving in the living room No. 2: color.

The living room can give people the first impression, so in the decoration of the living room, to keep the interior spacious and bright, giving people a comfortable and natural feeling, therefore, generally light-colored tiles are more suitable for installation in the living room, such as: light beige, white, solid color or slightly patterned are OK;

If it is a higher requirement for hygiene, the choice of solid color can better reflect the elegance of the owner, but in terms of cleaning and maintenance, it is more energy for us to spend, this is because the solid color cloth is dirty, we need to keep it clean often, if the work is too busy, there is no time to take care of it, then do not choose such a color of floor tiles.

Precautions for floor tile paving in the living room three: material.

When choosing the material of floor tiles in the living room, it should be noted that it is better for us to choose vitrified tiles, because it is more wear-resistant, bright, and easier to clean. Some people like to use antique bricks, which can reflect the personality of the owner of the room, but it is difficult to clean; It is best not to use stone, because the cost of stone is relatively high, and the color is single, most of the stone is radioactive, and its surface finish and wear resistance are also very low, so such materials are generally used in public places.

Precautions for floor tile paving in the living room No. 4: embellishment.

When decorating the living room, you must remember that simplicity and smoothness are always the theme. The same is true for the decoration floor tiles at home, sometimes, some of the floor tiles recommended by the decoration company are added to the painting, so we should properly maintain our own views when listening to the opinions of others.

The baseboard is a difficult point in the tiling of the home, because the wall generally uses paint, and the position of the contact between the paint and the ground is often kicked by furniture or people, which is easy to cause wall pollution and damage.

1. Specifications of floor tiles.

If the living room area at home is more than 30 square meters, we should choose 80 * 80 bricks, if it is less than this area, you can choose 60 * 60 specifications below, but should not be less than 40 * 40.

2. Color. The living room can be impressive, so in the decoration of the living room, the interior should be kept spacious and bright, giving people a comfortable and natural feeling, so usually light-colored tiles are more suitable for installation in the living room.

3. Material. When choosing the material of floor tiles in the living room, it should be noted that it will be better for us to choose vitrified tiles, because it is more wear-resistant, bright, and easier to clean.

4. Embellishment. When decorating the living room, it must be remembered that simplicity and smoothness are always the theme.

The living room is the central area of the home, and the choice of flooring materials in the living room is also very important, which will not only affect the general decorative effect, but also its subsequent use. After the selection of floor tiles, there are many places to pay attention to, and there are five precautions that need to be paid attention to when paving floor tiles in the living room, which are: tile specifications, colors, materials, decoration, and later maintenance of ceramic tile floors.

If your living room is more than 30 square meters, you can consider using 80*80 floor tiles when choosing the size of floor tiles for your living room. If your living room area is less than 30 square meters, it is recommended to use tiles below 60*60 specifications, but try not to use floor tiles smaller than 40*40. Because the size of the floor tiles used in the living room is small in a large area, people will feel that the whole space seems to be more crowded.

On the other hand, if you choose a large tile in a smaller space, you will feel inconsistent, so it is better to choose the right tile for your floor.

The décor of the living room gives a sense of comfort, brightness and naturalness, so it is more appropriate to use lighter floor tiles for the living room. For example, you can consider light beige, white, solid or small colors. Small patterns and other types of tiles would be better.

Living room with floor tiles is better made with vitrified tiles. The main reason is that they are more wear-resistant and have a greater shine. Best of all, it's easier to clean. Of course, some owners prefer to use old bricks. Old bricks look good luck, but it's harder to clean them.

Simplicity and softness are the eternal purpose of home décor, as is the laying of porcelain tiles in the living room. It can be said that the choice of the base is the main difficulty in tile placement. We know that most walls are made with paint.

The place where the paint comes into contact with the ground is also the easiest place to enter. If you don't install the motherboard, it can easily cause contamination or damage to the wall if it accumulates over a long time.

Before putting the living room floor tiles in the living room, it is recommended to soak the tiles in water for two to three hours, which will allow the tiles to absorb enough moisture before they can be placed and absorb the moisture. After wearing them, there will be no emptying, falling and sticking.

Pay attention to the above five precautions when laying floor tiles in the living room to make the living room floor more beautiful.

You can get it for free

Jinda decoration tells you! 1. The floor mat is the partition between the floor and the ground, it mainly plays the role of moisture-proof and balance in the floor laying, and there are many types of floor mats, such as aluminum film floor mats, special plastic floor mats, paper floor mats, etc. You need to choose the type of mat according to your actual situation.

When laying the floor mat, it should be noted that the floor mat must be paved smoothly and there can be no hollow drums; Moreover, the mat must be firmly pasted with the ground, and it is important not to stick glue only around the mat, which will seriously affect the moisture-proof function of the ground. 2. When installing the floor, the shrinkage joint should be reserved, except for the floor expansion joint of about 1cm between the floor and the wall. The gap between the floors should also be reserved for gaps, generally not more than 1mm, and when the floor with higher density is laid, each piece should be left with a gap to prevent future arch deformation.

3. The most important thing after paving is protection, the floor must be paved with paper bark to avoid foreign objects or paint falling to the floor during decoration construction. Within 48 hours after the floor is laid (this period is generally the health period of the floor), it is necessary to avoid frequent movement and heavy objects on the floor, so as to allow enough time for the floor adhesive to be firmly pasted and allow the floor to air dry naturally. In this way, the floor will be natural and durable.

4 You also need to learn how to maintain the floor! Do not rush to open the window for ventilation or use the air conditioner to blow the air after the floor is laid, which not only can not speed up the drying of the glue, but makes the floor dry and fragile. Therefore, it is important to allow the floor a period of time to acclimatize to the temperature and humidity in the room.

For the cleaning of the floor, it is best to clean the freshly laid floor with a vacuum cleaner or broom, keep the floor dry, and use a wrung out cotton mop to mop the floor when cleaning, and do not use a wet cloth. Jiadao Jinda Decoration Company not only ensures the quality of your decoration, but also brings beauty to your life and brings you the enjoyment of high-end quality life.

1. The appearance color should be uniform, the surface gloss and flatness should be good (except for special processes), especially the polished floor tiles should pay more attention to their gloss, the higher the gloss, the more exquisite the polishing process, the higher the relative hardness, so that the wear resistance, the higher the water absorption. Mul.

2. The water absorption rate should meet the requirements. The lower the water absorption, the higher the density of the product, and it is not easy to penetrate. Usually the colored ceramic tiles are not more than 10%; Unglazed porcelain tiles (including polished tiles) shall not exceed; Glazed porcelain tiles are not more than 1%. Mul.

3. Good anti-pollution ability. Drop one or two drops of ink or colored water on the surface of the tile, wipe it off with a damp rag after half an hour, if there are obvious marks, it is easy to seep; Basically, there are no traces, and its anti-fouling ability is also very good. Mul.

4. The size deviation should not be too large. That is, the four bricks are put together, which should be relatively regular and have no obvious dislocation. The size error is greater than the flatness of the product, which will not only increase the difficulty of construction, but also the effect after decoration is also poor, and it is not suitable for engineering. Mul.

5. Listen to the sound of tiles. Hold up a tile with each hand, and gently tap the brick surface of another brick with the corner of one brick, the sound is crisp and loud, and it is cooked; If the dull one is poor, it means that there is a heavy skin or crack phenomenon in the brick, and the heavy skin is that when the brick is formed, the air in the material is not discharged, resulting in a bad combination between the material and the material, and the internal crack, which can not be seen from the surface, and can only be identified by hearing the sound. Mul.

Before paving floor tiles in the modern decoration living room, you need to determine which method to use according to your personal preferences and how you want to create a home style, different paving methods of floor tiles in addition to having different visual effects, can often be matched with completely different types of floor tiles, and the materials are not the same.

There are two kinds of paving methods for general floor tiles, namely straight paving and oblique paving, and straight paving is to take a parallel way to the wall to pave the bricks, which is the most commonly used paving method; Diagonal paving is a way to arrange bricks at an angle of 45 degrees with the wall edge, which is more expensive than straight paving, but will make the space more varied, and the choice of straight paving or diagonal paving needs to be coordinated with the overall decoration style.

The floor tiles in the living room should also pay attention to the following matters.

In the process of paving the living room floor, the physical characteristics of thermal expansion and cold contraction should be taken into account, and expansion joints must be reserved. Narrow joints are commonly used when laying vitrified bricks, generally leaving the joints at 1 mm, and at the same time, using grouts close to the color of the bricks. The wide joint is more commonly used in paving antique bricks, generally between 5 8 mm, you can choose the grout close to the color of the brick, you can also choose the contrast grout to deal with the brick joint, so that the criss-cross lines make the ground have a strong decorative effect.

Sunshine Home Expo reminds you that you need to pay attention to the following matters.

1. Tiles are blistered on demand.

Wall tiles generally need to be soaked in water before paving, and the tiles that have been soaked in water affect the secondary sales, and the manufacturers or merchants generally cannot return them, which will cause unnecessary waste. Suggestion: To combine the construction progress of the workers, how much you need to soak, don't soak it all at once.

2. Make a plan for arranging tiles before paving.

Some construction workers paved as soon as they got the bricks, and only found that the proportions were not coordinated when they were paved to a certain extent, and then removed and re-paved, resulting in unnecessary loss and waste. Suggestion: Make a plan for paving bricks before paving.

3. Remind workers to notify in time if they find tile problems.

Don't wait until the paving is done to find out the problem, causing the construction party and the material party to pass the buck to each other. Suggestion: Clearly tell the workers before construction, and notify them in time when they find ceramic tile quality problems, so that they can ask the material party and the construction party to identify and solve the problem together.

4. Correctly mix the mixing ratio of cement and sand.

The proportion of cement is large, and the bricks can be quickly sticked, but the expansion coefficient of cement mortar is large, and it is easy to squeeze the bricks after paving. Suggestion: The mixed ratio of cement and sand is 1:3 for wall tiles, 1:2 for floor tiles, and cement for cement.

5. Be careful in tile processing.

Especially when the wall tiles touch the sunny corner, be careful not to destroy the glaze layer of the tiles, and pay attention to the gaps when connecting, not too small. Some tiles that need to be cut are best delivered after being cut by a material dealer at the time of purchase.

6. The sealing flue wall must be standardized.

The large core board can not be used as the wall material for re-building the wall, and the tiling is easy to cause the tile to arch, fall off and crack. And the plate does not last long in a humid environment.

7. The seam of the tile should not be too small.

The tile joint is too small to reduce the service life of the tile, and the tile cracks the glaze when it undergoes thermal expansion and cold contraction. Suggestion: Whether it is a seamed tile or a seamless tile, you must pay attention to the seams during construction. When purchasing, you can consult the material supplier in advance, how much gap you need to leave.

8. It is best to wait for the tile to dry before proceeding.

The tile is not completely dry and solid, if the joint is easy to loosen immediately, it will cause the tile to fall off in the later stage, leaving potential safety hazards. Suggestion: Grout should be carried out after the tile has dried, usually after 24 hours.

9. Clean the wall before tiling.

The wall surface of the putty has been scraped before, and the putty needs to be scraped again before tiling. Otherwise, it is easy to cause the tile to fall off.

10. Do a good job of protection when paving.

Do not scratch or pollute the brick surface. Do not walk around on the brick surface that is not dry when doing wall painting and coating, otherwise it will cause damage to the tiles.