How to maintain a steel chain watch? How to maintain the steel link watch

Updated on vogue 2024-07-19
10 answers
  1. Anonymous users2024-02-13

    With a watch that never wears out, the steel belt will always corrode, because the summer sweats a lot, it will seriously corrode the case, the strap may be better, my watch is the steel belt, there are small scratches on the surface, it has been worn for many years, and it can't be avoided.

  2. Anonymous users2024-02-12

    Do not touch hard objects and avoid contact with chemicals such as: alcohol, adhesives, gasoline, perfumes, etc. If you sweat a lot in summer, it is recommended to prepare a soft cotton cloth and wipe the bracelet to avoid sweat corroding the watch shaft and causing the bracelet to break.

    You can also go to the repair place for cleaning, generally about 10 yuan, they will use ultrasonic cleaning, and they will help dry after washing. Don't wash it yourself, it will also bring wear and tear to the bracelet.

  3. Anonymous users2024-02-11

    I am selling watches, now the shopping mall in the cleaning surface is not a few hundred at a time impossible, if it is a serious brand of things, their own small toothbrush at home, just brush the inside and outside of the position of the watch, not a serious brand may not be waterproof, there is no need for maintenance.

  4. Anonymous users2024-02-10

    You can't wipe it with water, you can't use corrosive things like alcohol, iodine, etc., and wipe it with a dry cloth.

  5. Anonymous users2024-02-09

    Tear it down. One or two steel chains, the steel chains of each watch are composed of fixed and detachable steel chains, near the buckle near the section is a detachable steel chain, when disassembling according to the steel chain prompt (in the back arrow prompt) after removing the hinge pin, you can shorten the thickness of the steel chain according to the personal wrist.

  6. Anonymous users2024-02-08

    Do not touch hard objects, avoid contact with chemicals, sweat a lot in summer, it is recommended to prepare a soft cotton cloth, wipe the bracelet, so as not to corrode the watch shaft due to sweat and cause the bracelet to break.

    You can also go to the repair place for cleaning, generally about 10 yuan, they will use ultrasonic cleaning, and they will help dry after the washing bucket is finished. Don't wash it yourself, it will also bring wear and tear to the bracelet.

    A watch, or wristwatch, is an instrument worn on the wrist to keep time and display the time. Watches are usually made of leather, rubber, nylon cloth, stainless steel and other empty materials to make a strap, and the "watch head" that displays the time is tied to the wrist.

  7. Anonymous users2024-02-07

    1. Daily cleaning: If the quality of the hand state pie watch is excellent, the waterproof more than 30m can be rinsed under the faucet, and if it is dirty, use a little hand sanitizer, and then rinse it clean.

    2. Clean the dirt: you can remove the bracelet, send it to the general optical store, and clean it with an ultrasonic mirror washing machine.

    3. After scratching, you can properly polish the rock traces, and the maintenance of larger clocks and watches can be done, or you can find different specifications of sand weaving cloth to polish slowly.

    Be careful not to contact chemicals such as vinegar, wine, various detergent products, etc., and rinse with water as soon as possible after touching the above items. In addition, the diving watch should also be rinsed with clean water after entering the sea.

  8. Anonymous users2024-02-06

    How to clean a metal bracelet.

    The general metal watch bracelet will have many black stains on the chain after wearing it for a long time, and the surface is easy to clean, but how to clean it in the seams? What kind of cleaning agent do I need to clean the stains in the bracelets?

    Cleaning method 1: Remove the strap, add an appropriate amount of detergent to hot water, soak for 10 minutes, and then scrub with a soft-bristled toothbrush. After finishing, rinse with clean water and dry with an electric fan.

    Cleaning method 2: Remove the strap and use a professional ultrasonic cleaning machine, the cleaning liquid is to add washing spirit to clean water, depending on the degree of dirt, if the dirt is serious, you should do more cleaning, and then rinse with clean water and dry it with an electric fan.

    What to pay attention to when cleaning your bracelet.

    1.In the cleaning process, no matter how careful you are, there will still be water seepage, if the watch body is flooded because of cleaning the bracelet, it will be more than worth the loss, or entrust the watch to the master to sort out.

    2.Metal bracelets are prone to rust if they get wet (water, sweat, etc.) and are not treated. Metal rust or dirt is easy to seep out of the seams and stain the clothes, and even cause **allergies, so after removing the table or washing with water, please remember to dry the seams with a cloth before putting them on.

    In addition, the diving watch can be rinsed with clean water after "going ashore", and the use of chemicals is easy to cause injury.

    How to care for your metal bracelet.

    1.First of all, it is necessary to regularly check the pins and spring bolts between the watch links and the shell strap to prevent the occurrence of leakage or wear.

    2.For Swiss watches with gold-plated case bracelets, it is recommended to wear them only in the summer or change the belt in the winter.

    3.The discount part of the bracelet is the most prone to problems, which is also related to the usual wearing, and the action should be gentle when opening and closing.

    For gold or gold-plated bracelets, avoid contact with mercury-containing chemicals, always prepare sweat gloves, and do more surface rubbing. Some white gold bracelets are rhodium-plated and should not be polished, otherwise the undertone will leak and turn yellow.

    5.The tungsten steel bracelet should be protected from impact and excessive pulling and torsional forces.

  9. Anonymous users2024-02-05

    If it is a leather bracelet, you can directly wipe it with a clean, slightly damp cloth, and then use a dry cleaning cloth to wipe it clean.

    If it is a metal chain, it will be a lot of trouble, the first is to use ultrasonic cleaning: this is also a professional cleaning method: remove the strap, use a professional ultrasonic cleaning machine, the cleaning liquid is to add special washing spirit to clean water, and if the dirt is serious, do it several more times, and then rinse it with clean water, and dry it with an electric fan.

    The second way to clean at home, it is safest to remove the strap if possible, add an appropriate amount of washing spirit in warm water (you can use toothpaste, salt, soapy water to clean yourself), soak for 10 minutes, and then scrub with a soft-bristled toothbrush. Finally, rinse with clean water and dry with an electric fan.

  10. Anonymous users2024-02-04

    1. Try to avoid the impact and bump of external forces. Try to stay away from corrosive liquids. Once you find that there is an abnormality in the link and function of the strap section and clasp, please test and repair it in time to prevent the strap from falling off and causing damage or loss.

    2. Special suggestion: It is recommended to take off the watch after a long time of exercise to prevent the watch bracelet from coming into contact with sweat and dust and forming dirt. If there is moisture and sweat between the crevices, be sure to remove as much water as possible and dry it to prevent bacteria from growing.

    For the dirt accumulated in the seams of the watch joints, you can take a soft-bristled toothbrush with a little toothpaste or detergent to brush the strap and seams, rinse with water, wipe with a flannel cloth and dry it with a hair dryer. When cleaning, please do it with the watch in good condition with the waterproof function intact to prevent water from entering the watch.

Related questions
5 answers2024-07-19

1.General watch cleaning tools, general hand tools include watch brushes and cleaning liquid. It is very simple to use ordinary tools for cleaning, and the cleaning fluid used is 120 jet gasoline. >>>More

7 answers2024-07-19

Stainless steel pots and pans need to be maintained in heating, cleaning and other links, so let's go to see how to maintain it with life. >>>More

8 answers2024-07-19

The characteristics of steel belt wear-resistant, bright color and long service life have become the first choice of many watch lovers, but scratches and cleaning are not easy, and it is easy to hide dirt and dirt but become a hard injury. >>>More

4 answers2024-07-19

The characteristics of steel belt wear-resistant, bright color and long service life have become the first choice of many watch lovers, but scratches and cleaning are not easy, and it is easy to hide dirt and dirt but become a hard injury. >>>More

28 answers2024-07-19

1. Wipe it off the dust every half month;

2. The process determines its limited performance, and the general seamless steel pipe has low precision: uneven wall thickness, low brightness of the inner and outer surfaces of the pipe, high cost of sizing to the length of the pipe, and there are pitting and black spots on the inner and outer surfaces that are not easy to remove; It can be washed with water. >>>More