Can I tile a mud floor directly?

You can directly lay tiles on the cement floor, but if you pave them directly, it is easy to cause hollowing, and the flatness of the tiles cannot be guaranteed, so it is recommended that when laying tiles on the cement floor, you can first beat the ground to avoid problems such as unstable paving and falling off.

The mud floor can be directly tiled The tile master will first smooth the ground for you, and then lay tiles on it, not directly on the mud, otherwise the tiles will be unstable.

The mud floor can not be directly tiled, because the mud floor foundation is not solid, easy to step down, should be done first cement floor, and then paved tiles, so that it is both durable and beautiful.

After reading your question and description, I don't think so. Before laying tiles, you must first lay a cushion layer, then a cement layer, and finally lay the tiles on the cement surface. I hope I can help you

When the paving reaches a certain thickness, it can be paved.

Summary. Can the ground surface be directly paved with floor tiles? Hello, glad to answer for you.

Generally speaking, as long as there is enough space, it is possible to directly lay tiles on the cement floor, but it is easy to hollow out if it is directly pasted, and it is difficult to ensure the flatness of the brick surface. It is recommended to pay attention to the ground before laying tiles, that is, not too flat, in case it will be easy to get bricks after a long time, and add more cement, the bottom sand should be wet enough, and wait for the brick surface to be completely stressed before leaving. If it is the cement floor of an old house, the cement needs to be dug up before laying the tiles, otherwise the tiles will not be stable when they are laid.

Now the floor tile paving in the home is generally dry paving, which is to beat cement grout on the back of the floor tiles, and the bottom is leveled with cement sand. Hope mine can help you! Do you have any other questions?

Can the ground surface be directly paved with floor tiles? Hello, glad to answer for you. Generally speaking, as long as there is enough space, it is possible to directly lay porcelain grip bricks on the cement floor, but the stool skin directly pasted is easy to hollow, and the construction difficulty is not easy to ensure the flatness of the brick surface.

It is recommended to pay attention to the ground before laying tiles, that is, not too flat, in case it will be easy to get bricks after a long time, and it is necessary to add more cement, and the bottom sand jujube type should be wet enough, and wait for the brick surface to be completely stressed before leaving. If it is the cement floor of an old house, the cement needs to be dug up before laying the tiles, otherwise the tiles will not be stable when they are laid. Now the floor tile paving in the home is generally dry paving, which is to beat cement grout on the back of the floor tiles, and the bottom is leveled with cement sand.

Hope mine can help you! Do you have any other questions?

Is it illegal to lay bricks and put corn in your own field?

It is illegal to lay bricks and put grain in your own field.

Is it illegal?

Yes, dear

It is completely possible to pave the floor tiles without using cement, and now the quality of the tiles is getting better and better, the water absorption rate is also decreasing, the size of the tiles is larger and the weight is also increasing, the traditional cement river sand tiles have been unable to meet the requirements of the current paste, and the use of tile adhesive is the best choice.

Compared with the traditional cement river sand tiles, tile adhesive has simple construction steps, does not need to wet the wall, soak the tile, fix the support and other processes, saving a lot of manpower and material resources; Moreover, the adhesion force is 3 times that of ordinary cement river sand, and it has the advantages of no hollowing, no falling off, no slipping, water resistance, moisture resistance, formaldehyde, benzene and other harmful substances.

Laying bricks can be directly paved with cement, and the specific methods are as follows:

1. First of all, the ratio of sand and cement is 3:1, mix with a small amount of water and start mixing;

2. At the same time, prepare a basin of thick cement slurry for later use;

3. After that, splash the place where the floor tiles are to be set with water;

4. Shovel the mixed cement sand to the place where the floor tiles are to be inlaid;

5. After shoveling, a small shovel should be used for preliminary smoothing, if not smoothed, it will lead to uneven floor tiles;

6. After that, use a small plate to completely smooth the surface of the sediment;

7. Then smear the pot of thick cement slurry that has just been prepared on the back of the tile;

8. Then put the plastered cement floor tiles flat on the place to be paved;

9. Knock it with a rubber hammer and level it with a level;

10. Finally, use the handle of a small hammer on the side to block it tightly.

Summary. Hello dear. You can directly lay floor tiles, but you must ensure that the cement floor is flat, no falling off, dust, cracks, potholes, etc., otherwise if you directly lay floor tiles, after a long time, the floor tiles will appear hollow and uneven.

The cement floor should be repaired and sanded first, and the base surface should be in a solid and powder-free layer, and the ground should be cleaned with a vacuum cleaner, and then the floor tiles should be paved with tile adhesive.

Can the concrete floor be directly attached to the floor tiles?

Hello dear. You can directly lay floor tiles, but you must ensure that the cement floor is flat, no falling off, dust, cracks, potholes, etc., otherwise if you directly lay floor tiles, after a long time, the floor tiles will appear hollow and uneven. The cement floor should be repaired and sanded first, and the base surface should be in a solid and powder-free layer, and the ground should be cleaned with a vacuum cleaner, and then the floor tiles should be paved with tile adhesive.

How to pave tiles 1, tile soaking and tiling before tile treatment, first soak the tile in clean water for two hours, so that the tile can fully absorb water, so that the tile will not fall off due to lack of adhesion due to water loss. 2. Set up the auxiliary line to fully absorb the water after the tile, in order to ensure that the tile is more smooth after paving, it is necessary to set the auxiliary line on the screed layer of the wall, and the finished product effect is more beautiful. 3. Set the horizontal line of the supporting wooden board as the rope to avoid the situation that the tiles do not reach enough viscosity and fall.

4. Start paving tiles in order, pay attention to paving according to the order. First from the door and window area paving, then from the bottom to the top, from left to right paving sequentially. Use a shovel to wipe the mortar on the back of the brick, and then stick it on the ground, and gently tap the surface of the tile with a rubber hammer after pasting, so that the adhesion is stronger and there will be no hollowing.

5. After cleaning the tiles, clean up some dust and stains on the surface of the tiles. If the dirt on the surface of the tile is difficult to clean, clean it with dilute hydrochloric acid solution, and then clean it with clean water.

Hello, dear, I am happy to answer for you: what can be laid on the brick floor Answer: dear, hello, the ground material contains:

Stone, tile, plastic flooring, wood flooring, carpeting, epoxy floor paint, and these kinds of lead, and then the new materials are derived from these materials, there is no so-called new and old. However, the only ones that can be directly laid on the floor tiles are plastic flooring, laminate flooring and laminate flooring. Thank you for your patience.

The above is all my reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best! Peace and joy!

Laying bricks can be directly paved with cement, and the specific methods are as follows:

1. First of all, the ratio of sand and cement is 3:1, mix with a small amount of water and start mixing;

2. At the same time, prepare a basin of thick cement slurry for later use;

3. After that, splash the place where the floor tiles are to be set with water;

4. Shovel the mixed cement sand to the place where the floor tiles are to be inlaid;

5. After shoveling, a small shovel should be used for preliminary smoothing, if not smoothed, it will lead to uneven floor tiles;

6. After that, use a small plate to completely smooth the surface of the sediment;

7. Then smear the pot of thick cement slurry that has just been prepared on the back of the tile;

8. Then put the plastered cement floor tiles flat on the place to be paved;

9. Knock it with a rubber hammer and level it with a level;

10. Finally, use the handle of a small hammer on the side to block it tightly.

Cement paving tiles should not be replaced with mud. Although the floor tile is a decoration project, but the floor tile also belongs to the surface part of the load-bearing structure, the floor tile should be determined according to the design requirements of the mortar mix ratio and the thickness of the mortar of the bonding layer, the construction should be used to lightly hit the floor tile with a rubber hammer to make it bond tightly with the mortar, and adjust its surface flatness and uniform gap. Ensure that the floor tiles have sufficient strength after the cement mortar is solidified.

In this way, the floor tiles will not be broken when subjected to a live load of more than 100 kilograms per square meter. These are not places for mud.

Even when the mortar is used as a bonding layer, the density is not enough, and there are also those who step on the floor tiles later.

Yes, you are talking about the wet laying method that is laid directly on the ground level. There are two kinds of floor tiles: dry and wet: 1. Dry paving

Directly paved on the horizontal cement floor, when laying floor tiles, the wet fine sand should be paved underneath the paving, generally before laying floor tiles, sprinkle water on the horizontal soil, and also say that the floor tiles are first put in the water to soak and dry, so that the floor tiles can eat through the water. The horizontal soil is sprinkled with water and moistened, evenly coated with mud, and then leveled with a level ruler before the floor tiles are paved. 2 Wet Shops:

Wet paving is directly smeared with cement behind the bricks, and then directly laid on the wall or ground, the wall tiles are used wet paving, small bricks and the ground flatness is better with wet paving, which can save the thickness of the ground.

The floor tiles cannot be moisture-proof, so they can only smash the original cement floor and redo the waterproof mortar, which is not expensive. However, even if the floor is ready, there is a possibility that moisture will still seep out of the wall, so it is recommended that the wall surface also needs to be done, which is a very troublesome project.

No. Cement has a certain strength after solidification, and it is not afraid of water immersion. Soil is also strong in a dry environment, but when it comes into contact with water, it becomes mud, and the floor tiles will move. Even indoors, the ground will inevitably get water.

It is recommended that you ask the designer or foreman.