Is it possible to lay PUC flooring directly on the old tile floor?

Updated on home 2024-07-12
31 answers
  1. Anonymous users2024-02-12

    How to choose flooring First, the planning before choosing the floor can not be less 1. Household flooring is more cost-effective than floor tiles Flooring is the latest popular decoration material, which is cheaper than traditional floor tiles.

    If you want to save money by decorating the floor, you also need to consider the decoration style at home and choose the right floor according to the decoration style. Flooring and floor tiles are found throughout the renovation and maintenance process, and flooring is more cost-effective. If there is floor heating at home, if there is a problem, the floor is removed and repaired, and then assembled.

    The floor tiles have to be broken and re-paved, so that they need to be purchased again. 2. Reasonable planning of floor paving area and on-demand procurement In order to reduce the waste of flooring in the decoration process, it is best to plan the area that needs to be used for flooring, plus the number of losses, and select to prevent excessive purchase and waste of flooring. Common laying methods for flooring:

    Three-six-nine and one-half. The paving method of 369 is a stepped gap structure, which usually saves materials, and the material loss is about 3%; The loss of one-half paving is the largest, about 5% higher, but the ground of this kind of laying is neat and symmetrical, and the visual effect is better. 3. Planning floor paving accessories to save money The floor paving accessories include floor nails, headless nails, floor glue, moisture-proof mats, and door strips; If it is a keel floor, you need an extra keel, etc.

    It is the accessories of the floor that occupy a very important position in the paving of the floor, and most of the after-sales problems of the floor are directly related to the floor accessories. Therefore, choosing a good flooring accessories can save future maintenance costs.

  2. Anonymous users2024-02-11

    Hello, it is possible to pave the PVC floor directly on the old tile floor.

  3. Anonymous users2024-02-10

    No, the floor tiles must be removed! If the floor tiles are directly glued, the gap will be generated and glued slowly.

    It will fall off and loosen!

  4. Anonymous users2024-02-09

    It is possible to lay new tiles on top of old tiles, but few people do this because there are many disadvantages.

    The new tile is not very reliable directly on the old tile, because the old tile, the surface is still relatively smooth, if the new tile is directly paved on it, you need to use the tile adhesive, but the effect is not very good, easy to cause bulging, falling and other phenomena. And tile adhesive is a powdered adhesive that contains a certain amount of formaldehyde, which is not environmentally friendly.

    On the surface of the old floor tile brush on the tile surface treatment agent, tile mosaic binder, etc., if you do this, the ground leveling is difficult, you need to re-level the place that produces hollowness, and because the old tile plus the original cement mortar has a certain thickness, after paving the new brick, the ground height will increase. Therefore, in order to use it for a long time, it is better to shovel off the old tiles first, and then paste the new tiles.

  5. Anonymous users2024-02-08

    The new tiles will not be firm and easy to fall, and the surface of the tiles will be uneven. It is recommended to remove the old tiles and then lay new ones to ensure the pasting effect.

  6. Anonymous users2024-02-07

    No, you can't'The old tile surface is slippery and the cement does not stick'To knock it out.

  7. Anonymous users2024-02-06

    It can be pasted, but there is still a certain small probability of hollowing and falling off, and the construction is not much cheaper, because now the method of paving directly on the old brick again is the use of tile adhesive powder or marble adhesive powder + tile adhesive partner (additives) and the above 2 materials to meet the requirements of construction quality Now the brand that can generally be used is JCDecaux or Henkel, ** not cheap, not much to save, and there are certain sequelae. The pros and cons are explained clearly, and the landlord thinks about it himself. (It is recommended that the landlord inquire about the price, I have calculated **, a square landlord will probably save about 10 yuan in this situation, and save hundreds of garbage fees, but the area will be smaller).

  8. Anonymous users2024-02-05

    Generally speaking, as long as there is enough space, it is possible to directly lay tiles on the cement floor, but it is easy to hollow out if it is directly pasted, and the construction difficulty is not easy to ensure the flatness of the brick surface. It is recommended to pay attention to the ground before laying tiles, that is, not too flat, in case it will be easy to get bricks after a long time, and add more cement, the bottom sand should be wet enough, and wait for the brick surface to be completely stressed before leaving.

    If it is the cement floor of an old house, the cement needs to be dug up before laying the tiles, otherwise the tiles will not be stable when they are laid. Now the floor tile paving in the home is generally dry paving, which is to beat cement grout on the back of the floor tiles, and the bottom is leveled with cement sand.

  9. Anonymous users2024-02-04

    Tile flooring is possible to make epoxy flooring.

    1. Base surface treatment: decontaminate and degreasing with alkaline water--- clean with water--- dry --- brush the floor during the closed period--- and level the tile floor joints with epoxy putty.

    2. Floor construction

    1) Thin coating of floor paint: painted three times--- life span of more than 3 years. 23-28 yuan square.

    2) Epoxy artesian flat: The coating thickness of the original ground will not be absolute flat, which will lead to an increase in thickness - an increase in cost) - 60-100 yuan square.

  10. Anonymous users2024-02-03

    Many companies have paved the original ground with floor tiles, and when they need to do the floor, they do not want to move the ground, one is to increase the construction period, and the other is to reduce the construction cost.

    The tile floor can be made of epoxy flooring, but it must be treated with a base layer, and the base surface of the tile floor is treated: decontaminated and oiled with alkaline water--- cleaned with water--- dry --- brushed during the closed period--- and the tile floor joints are leveled with epoxy putty. After the above base treatment, customers can choose epoxy floor paint according to their needs, thin coating epoxy floor and epoxy self-leveling can be.

    Through the early treatment of the base layer is to meet the requirements of the epoxy floor base layer, if the treatment is not good, the impact on the project is greater. Because the ground condition has a great impact on the quality of the final epoxy floor project, if the ground condition does not meet the requirements, the epoxy project is difficult to do well, and the phenomenon of shelling, falling off and blistering often occurs in the use of the epoxy floor.

    Yiwu Aojie flooring professional ground treatment manufacturers to solve your problems.

  11. Anonymous users2024-02-02

    1. The surface of the floor tiles is very smooth, and it may be difficult to bond the tiles.

    2. Unless you have enough space in a place such as a door. Thick floors, you have to change the door.

    3. Except for the first floor, other floors will increase the weight of the floor slab. This affects security.

  12. Anonymous users2024-02-01

    It can be paved directly, but it is best not to directly lay new floor tiles on the old floor tiles, one is the problem of water and electricity, if there is a problem or change in the future, it will be very troublesome; One is the safety problem, if you pave it directly, it will increase the weight; In addition, the new floor tiles are directly laid, the height of the entire ground increases, and the door must also be changed.

  13. Anonymous users2024-01-31

    You have to turn it around and lay a new layer of tiles. That's a no-no. When the old building at home is renovated and renovated.

    Feng Ting wanted to re-pave the floor tiles. The old floor tiles underneath must be removed and re-paved. for they all lifted him on the spot and threw him.

    Layer new floor tiles on top of the in-situ tiles. How high is the ground? Can't you open the door?

    Nor is it firm in one. The new floor tiles are laid directly on the concrete surface. This is the best way to pave the floor.

    It is very sturdy and sturdy to use. The new floor tiles cannot be laid on top of the ones that have to be turned. It must be planed.

    Every master bricklayer. It's all going to do.

  14. Anonymous users2024-01-30

    This situation depends on whether the ground of your home has this space that can be raised, if you want to lay new bricks on the old bricks, the ground should be raised by three to five centimeters at the bottom, so that it is not only the height of the reduced room, but also the continued use of the original door, if the height of the room is enough, and you also want to replace the door, it is possible, if this is not the case, you have to remove the old brick pickaxe and then pave, if it is just a single room to lay new bricks, you can also, but if you open the door outside, you don't need to move the door, you think about it.

  15. Anonymous users2024-01-29

    It's better to dispose of the old ones, otherwise the ground will be higher.

  16. Anonymous users2024-01-28

    Not good, the floor cushion is too high and causes the space in the house to be depressed, and it doesn't cost much to remove the old floor tiles, but it is better to remove the old floor tiles.

  17. Anonymous users2024-01-27

    The interior decoration of the room is best not to press the old with the new, the load of the floor, the water and electricity sewer pipes are very troublesome, and it is better to dismantle the old and install the new.

  18. Anonymous users2024-01-26

    Generally, the old floor is pried off and a new floor is laid.

  19. Anonymous users2024-01-25

    New tiles should not be laid on top of the old tiles. This kind of paving can't stick together. The old tiles should be removed and the new ones should be replaced.

  20. Anonymous users2024-01-24

    The old tiles can only be rebuilt by cutting off the old tiles.

  21. Anonymous users2024-01-23

    The floor should be paved flat, otherwise the side will be warped, and it should be with cement and sand, and you pave it in this way, which also reduces the floor height.

  22. Anonymous users2024-01-22

    It is recommended that you switch to wooden flooring! Otherwise, if you knock out the bricks, it will be a money! If you don't take it out for a long time, you can't pave it new. Wooden floors can be laid on long bricks.

  23. Anonymous users2024-01-21

    The renovation of a new house is a very happy thing for most of us; For those who buy a second-hand house, they are not satisfied with the decoration style of the previous homeowner, so they want to decorate according to their own style.

    Many times they will be dissatisfied with the color and style of the tiles left by the original owner, and want to re-paste the tiles or floor tiles according to their own ideas. In my personal opinion, it is best for us not to lay new tiles directly on the original tiles, which will seriously affect the later use.

    It is very bad to lay new tiles directly on top of the original tiles, and these bad points are summarized mainly into the following points:

    First, affect the aesthetics If we are pasting tiles directly on the basis of the original ceramic tiles and pasting new tiles, it will make the whole room look unsightly. It may be that the previous tile is not flat enough, which will also cause the new tile to be uneven.

    And in all the methods of tiling, I have never seen such a fancy paste; I think even architects will be amazed at what you think.

    Second, reduce the space of the family on the old tiles, directly paste the new tiles. For spaces such as kitchens and offices, it is a small place. This practice is tantamount to putting a frame on top of the room, which greatly reduces the utilization rate of space.

    Moreover, the double-layer tiles will also make the walls of the room thicker, affecting our daily normal use.

    3. It is unsafe in the process of use, if the new tiles are directly pasted on top of the old tiles, it will pose a certain threat to our personal safety. On the one hand, because the surface of the tile is smooth, the stickiness of the new tile is not too good, and it is easy to have the risk of falling.

    On the other hand, because the tiles have been on for a long time, they are easy to fall off. Coupled with the gravity of the new tile, I think that once the tile comes off, both tiles will fall down and easily smash us.

    So based on the above situation, I personally do not recommend directly pasting new tiles on top of the old tiles. The correct approach should be to remove the old tiles and level the wall before starting to paste the new tiles.

  24. Anonymous users2024-01-20

    If the clear height of the room is large, it is okay to copy the general clear height of more than 3 meters. However, in order to strengthen the adhesion of the new paved floor tiles and prevent them from appearing empty layers and bulging in the future, the original floor tiles should be leveled with concrete with coarse sand or small melon seed flakes, and its thickness should be more than 6cm.

    Method and construction steps:

    1. Roughly turn the original floor tiles into wool (crack and break the original floor tiles).

    2. Clean up the site. Rinsing the ground with water is more effective in the later stage.

    3. Use concrete with roving or small pieces to pour and level the ground, or use a layer of special floor wire mesh to bury it under the concrete.

    4, when the concrete is dry for 8 minutes, the normal floor tile pavement construction can be carried out after the general days.

    After the above is completed, the ground height will increase by about 11 cm, so that there will be little construction waste, but the construction period is longer and less economical.

    The original old floor tiles can also be lifted off and then the new floor tiles are laid, most of the home decoration adopts this method, such construction movement is large, and a large amount of construction waste is generated.

    To sum up, it is recommended to choose a suitable construction method according to some comprehensive considerations of yourself and the net height of the house.

  25. Anonymous users2024-01-19

    It is not possible to lay tiles on top of the original tiles, which will cause the tiles to be unstable, and the original tiles should be removed and replaced with new ones.

  26. Anonymous users2024-01-18

    No. Be sure to remove the original tiles, otherwise the new tiles will be very unstrong and easy to crack.

  27. Anonymous users2024-01-17

    No, when we decorate a new house, we must pay attention to not being able to lay new tiles on top of the original tiles to minimize this dangerous behavior

  28. Anonymous users2024-01-16

    Composite copy

    The floor can be laid directly on the floor bricks, but the DU floor tiles are not allowed, if you want to pave the floor tiles again, you still have to knock out the original DAO floor tiles.

    Knock out the floor tiles 12 yuan square, and then pave it, the decoration company labor is about 15 yuan, and if you invite someone, it will be about 13 yuan. The money of cement, yellow sand is calculated separately.

  29. Anonymous users2024-01-15

    It is possible to lay laminate flooring on the floor tiles, but it is not possible to lay floor tiles again on the tiles, so be sure to knock out the original floor tiles and re-do the waterproofing before laying the floor tiles.

  30. Anonymous users2024-01-14

    Wooden flooring on top of the floor tiles is the best because it doesn't have to be leveled anymore and it feels good on your feet!

  31. Anonymous users2024-01-13

    If the original.

    The floor tiles are relatively thin, and the eradication of the floor tiles is too time-consuming and labor-intensive, so you can directly reprint the new floor tiles directly on the old floor tiles, brush the tile surface treatment agent, tile, and mosaic adhesive on the surface of the old floor tiles, and then pave the new floor tiles, which is simple and trouble-free.

    Tile glue is needed to lay new bricks on top of the old floor tiles, and this powdered adhesive has a certain amount of formaldehyde, so everyone should not move in in the short term after paving.

    At the same time, if your home is on the lower floor or you want to build a bathroom, this renovation method is not recommended. This is because the bathroom is relatively humid, and after the new floor tiles are paved, the moisture of the old floor tiles is not easy to dissipate, and the lower part will be damp, and the new bricks will be hollowed out or even fall off.

Related questions
9 answers2024-07-12

Skirting boards that are commonly used at present.

The material is stone. >>>More

9 answers2024-07-12

You can tell the pros and cons, thank you! 

17 answers2024-07-12

Tile tiling requires the use of tile adhesive. It has certain anti-seepage performance, anti-aging performance, freeze-thaw resistance, acid and alkali resistance, etc. Tile adhesive can greatly improve the adhesion force between the tile and the base layer. >>>More

8 answers2024-07-12

A few days ago, when I went to a relative's house in the countryside to drink the wedding banquet of the new house, I found that his house used terrazzo to pave the floor, and I haven't seen such materials for a long time. I feel that the overall effect is very good, and let's take a look at the effect of the terrazzo floor of the relatives' house. >>>More

7 answers2024-07-12

How to renovate the old bathroom floor if you don't want to remove the tiles? Cleaning and renovation: the black edges can be cleaned with banana water; The floor tiles with little damage can be polished and waxed, but the surface of the floor tiles is found to be slippery, so it is not recommended to use; Grinding, polishing, refurbishment: >>>More