How to mix Nippon paint? How to use Nippon paint

Nippon Paint latex paint physical stores will provide free color grading services, and there are thousands of color cards to choose from, automatically graded by the color dispenser, no need to worry about color grading.

How to use:

1. Clean the painted surface before painting.

2. Repair cracks, caves or ditches on walls or ceilings. At present, gypsum putty, large white putty or 108 glue cement putty are often used.

3. The commonly used painting methods for interior wall finishes are roller coating and brushing. For the roller coating of general coatings, it is necessary to pay attention to the amount of slurry suction on the hair roller, not too much or too little, and it is best to prepare a dipping groove to make the slurry absorption amount of the hair roller uniform and appropriate.

When painting, it is generally started from the part of the room that is the largest and most difficult to paint, first brush the ceiling, and then brush the wall. The fluff of the drum should be slightly longer so that more paint can be absorbed at a time. Due to the large area of the roof and the lack of intervals, the painting should be completed at one time, and should not be shelved halfway, otherwise it is easy to produce lap marks at the joint.

5. When the wall roller is coated, the wool roller should be applied from the bottom to the top, with force when going up, and gently back when it is downThe amount of the rolling force increases with the decrease of the paint in the wool roller, so that it does not cause flow.

6. The painting of interior wall paint finishes should pay attention to the uniform coating film and moderate thickness, not the more paint used, the thicker the coating film, the better. Conversely, if the coating is too thick, it will cause poor film adhesion, which can cause peeling.

The steps for using Nippon Paint water-based paint are as follows: use 500 sandpaper to polish along the direction of the wood grain to remove burrs and pencil strokes and other stains. Remove clean dust after sanding.

Brush with water-based paint, pay attention to evenly brushing. (Trick: brush along the direction of the wood grain, it is easier to brush evenly) and wait for the water-based paint to dry for 8 hours, lightly grind with 1000 sandpaper, and remove the dust after sanding.

Wipe the water-based color rubbing solution, wipe it in a circle mode first, wipe it evenly and then clean it in the direction of the wood grain, and dry it for more than 2 hours after wiping. Add about 10 pieces of water to the water-based transparent bottom, stir gently, and let stand for 10 minutes. Brush with water-based transparent bottom, brush along the direction of wood grain, pay attention to the uniform brushing.

Repeat 1 time between 4 and 8 hours. After the water-based transparent bottom is dry, carefully sanded with 1000 1500 sandpaper. Add about 10 water-based colored topcoats, stir gently, and let stand for 10 minutes.

Spray a water-based colored transparent topcoat, and pay attention to the uniform spraying. If the color is darker, this process can be sprayed separately for multiple times, and the color is subject to the requirements. For water-based clear topcoat, add about 10 pieces of water, stir gently and let stand for 10 minutes.

Spray a water-based topcoat, taking care to apply evenly, and repeat after an interval of 2 hours.

The use of paint is very simple, two cases:

1 Hire a painter to paint, if you use a painter to paint, you only need to buy paint and pay for the work, and you don't have to worry about anything else.

2 Paint the wall yourself, in this case, you need to buy self-brushing paint, self-brushing paint coverage rate will be better, even if the uneven painting can not be seen, the ** Yunquan water-based wall paint that was brushed on the wall is a self-brushing wall paint, and the environmental protection is world-class.

Nippon paint is divided into these two situations, that is, it depends on your own hands-on ability. It's not that hard.

Different lacquers have different ways to use, and there are clear instructions for use on the outer packaging that can be referred to.

The use of Nippon Paint is as follows:

1. Buy it back and find a painter.

2. Call the contractor who buys paint.

3. Buy your own brushes.

I don't really recommend you to use paint, because there are too many harmful substances in it, how good it is to use diatom mud, environmental protection and health, and it can also improve air quality, my home Yunquan diatom mud, I feel good, you can also try it.

Nippon Paint Latex Paint Construction Method: First Deal with the Wall 1Scrape putty (at least 2 times need to level the wall) 2

Grinding and leveling (grinding and leveling the scraped putty) 3Priming is to spray the primer out. 4.

Start spraying the topcoat, the topcoat is the final molding state, remember that the topcoat should be at least twice or more, so that it is smoother and better-looking. These are the approximate construction methods, but I personally do not recommend the use of latex paint, after all, latex paint is not environmentally friendly in the final analysis, the generation conditions of latex paint are destined to be not environmentally friendly, especially at home with a child box pregnant women are not recommended to use, my own home is freight, I use Yunquan water-based paint, water-based paint is now more environmentally friendly wall decoration materials. You can find it directly on **.

You can check it out.

Now the use of wall paint is not too difficult, most of Nippon's paint is sprayed, we usually do not have air pumps and spray guns, so it is difficult to construct by yourself, I also learned about this before, I did not use Nippon paint, because the labor cost is very expensive, I am looking for Yunquan water-based wall paint, is also environmentally friendly materials, non-toxic and non-polluting, you can use a roller to construct, children can be constructed, Tmall can be understood, you can learn about it.

Summary. Hello, I'm glad to answer for you, how to mix paint in Nippon: 1. Take the primary color as the basis and add an appropriate amount of white paint, which can reduce the saturation of the primary color, that is, the different shades of the paint color.

2. Take the primary color as the basis and add the appropriate black paint, and the brightness of the primary color will change, that is, the brightness of the paint will be different. 3. In addition, add an appropriate amount of red, yellow or blue paint, you can call up different intermediate colors, such as the primary color is red, yellow or blue, add orange, purple or green paint, then you can adjust different grays, such as blue gray, purple gray and other colors.

Hello, I'm glad to answer for you, how to mix paint in Nippon: 1. Take the primary color as the basis and add an appropriate amount of white paint, which can reduce the saturation of the primary color, that is, the different shades of the paint color. 2. Take the primary color as the basis and add the appropriate black paint, and the brightness of the primary color will change, that is, the brightness of the paint will be different.

3. In addition, add an appropriate amount of red, yellow or blue paint, you can call up different intermediate colors, such as the primary color is red, yellow or blue, add orange, purple or green paint, then you can adjust different grays, such as blue gray, purple gray and other colors.

Before using the paint, the paint should be stirred evenly, pay attention to the stirring, should be stirred from top to bottom, to ensure that it is fully stirred, then add the appropriate amount of curing agent, and then add the appropriate amount of diluent according to the construction environment, stir it evenly, you can start to use.

How to adjust the color of latex paint.

1. Types. Milk: a small amount of red and yellow and white latex paint;

Light yellow: yellow with white latex paint;

Orange: red and yellow with white latex paint.

2. Red species.

Aqua pink: a small amount of red and white latex paint;

Red: red with a small amount of yellow and black with white latex paint;

Brown-red: red plus yellow and black.

3. Green type.

Light green: a small amount of green with white latex paint;

Warm green: a small amount of green and a small amount of yellow and white latex paint;

Dark green: green plus black and white latex paint.

4. Blue type.

Light blue: a small amount of blue with white latex paint;

Dark blue: blue plus black and white latex paint;

Duck egg skin color: blue with a small amount of red and white latex paint.

Latex paint color palette.

1. Silver gray: white 95%, black 4%, blue 1%;

2. Sky blue: 90% white, 9% blue, 1% lemon yellow;

3. Apple color: white 94%, lemon yellow 4%, blue 2%;

4. Cream: 85% white, 10% iron, 5% lemon yellow;

5. Cherry red: 75% red, 25% purple;

6. Brown: 50% iron red, 25% medium red, purple red, black;

7. Dark green: 50% yellow, 35% blue, 15% black;

In addition, you can also add appropriate white according to the desired color shade; Dark colors should be added in small amounts, otherwise the color will be polluted.

Latex paint is resistant to the color of slag silver.

The durable color in latex paint is a relatively low-key color, which has no visual impact and can stand the test of time.

1. White latex paint.

White latex paint is a beautiful color of latex paint, because white is not only a versatile color, but also its simplicity and cleanliness can improve the light in the room and increase the sense of space in the room.

2. Light latex paint.

Light latex paint is also used as a durable color in latex paint, especially when used as a home decoration. The light has a faint sense of warmth, and the color is light and light, which will not cause a sense of depression. Therefore, many styles of home decoration will choose light latex paint.

3. Light gray latex paint.

Light gray latex with old paint is a popular color in recent years, giving people a sense of coolness. Light gray latex paint is a neutral color, not "cold" or "warm", so it is very good for the creation of space, which can make the space environment quiet, but not cold.

According to the information of love procurement, Nippon Paint toner can adjust other brands of latex paint in the following ways:

1.Before debugging, prepare the color card, call up the desired color for the color card, and then take out a part of the latex paint and place it on the debugging board.

2.Take out the appropriate amount of color paste, add it to the latex paint, the color should be appropriate, otherwise it will affect the degree of color mixing, stir evenly, use a scraper to scrape the latex paint on the color palette, check the color on the palette on the coloring card hail back lead, and increase the amount of color paste in the case that the debugging board is not enough.

Latex paint is an organic coating, which is prepared with synthetic resin emulsion as the base material and added pigments, fillers and various additives, which has the advantages of fast film-forming speed, strong shading, adhesion and strong cleaning ability of Yiqingshi.

Hello dear! We'll be happy to answer for you. How to adjust the color of Nippon paint honey:

1. Latex paint color toning formula: lemon yellow + rose red + black = cooked brown; Pure purple + rose = fuchsia; Lemon yellow + rose red + pure black = earthy yellow; Pure purple + pure white = pink-purple; Sky blue + pure black = grayish blue; Sky blue + pure black + pure purple = light gray blue; Rose Red + Pure Black = Brown; Grass green + pure white = pink green. 2 If you want to mix the colors yourself, you can refer to the modulation methods of various colors: Yellow type:

cream yellow, a small amount of red and yellow and white latex paint; Light yellow: yellow with white latex paint; Orange: red and yellow with white latex paint. 3 Red types: water pink, a small amount of red and white latex paint; Red: red with a small amount of yellow and black with white latex paint; Brown-red: red plus yellow and black.

Green type: light green, a small amount of green with white latex paint; Warm green: a small amount of green and a small amount of yellow and white latex paint; Dark green: green plus black and white latex paint. 4. Blue type.

Light blue: a small amount of blue with white latex paint; Dark blue: blue plus black and white latex paint; Duck egg skin color, blue with a small amount of vertical red and white latex paint. Many people think that any latex paint can be adjusted in any color, in fact, this view is different, the latex paint on the market is actually basically regardless of those brands, are divided into 5 models: white:

In principle, there is no color mixing, but you can adjust a lighter color. 5. Pink and white base color: You can use color 1-3 colors and a small number of 5 colors on the color card.

Medium base color: Very few colors are used in this lacquer tone, which can be ignored. Dark base color:

You can use most of the No. 5 colors and some No. 7 colors on the color palette. 6 Black and gray base colors: You can use most of the 7 colors on the color card.

Basically, the color card of the brand is 7 colors from dark to light, and the large color card will have hundreds of base shades, and then, respectively, there are 7 colors from light to dark. 7 The darker the color, the formula requires that the powder should not be too heavy, and the lighter the color, the more powder can be added. Otherwise, it will be recolored.

For example, the master lacquer, the whole series of only 45 and 42 series, 45 series is divided into 45-110 (pink white), 45-210 (dark base color), 45-250 (black gray, etc.), Yimei series, only white and pink white, 50, 40, Langjing series, etc., only white, pink white, dark base color, etc. 8 When mixing colors, be sure to choose the corresponding base color for color mixing, of course, use the dark base color of the paint to adjust the black and gray base color, not no, change the formula mu stuffy bush can, but, so that the paint from the fast cherry blossom is easy to cause the color is not correct (because the base color paint formula is not the same), it seems that the tone is right, in fact, the color is not right, this is the reason.