Questions about how to use Nippon Paint yourself

Your problems are solved one by one:

1.How many barrels do you want to buy, how many liters?

The top surface area of the interior wall divided by 12 16 square meters per liter divided by the capacity of the barrels equals the number of barrels.

Because of the large roof area, the amount of latex paint can be simply calculated before construction, and the general painting process can be painted 12 16 square meters per liter.

2.How do I use Nippon Paint myself? What tools do I need to buy and what points should I pay attention to?

Construction process: cleaning the surface - filling putty - sandpaper sanding - filling putty - sandpaper sanding - sandpaper sanding - primer - coating paint - sandpaper grinding - compound putty - sandpaper grinding - coating paint - bright friction.

The process is more complicated, it is recommended to find a small home improvement company.

Tools: Flat brush, roller, spray gun.

It is recommended to use, plate brushes and rollers.

The above is excerpted from "Interior Designer's Handbook", "Decoration Materials Now".

I still recommend that you find a small home improvement company, this is more cost-effective, you don't know the process, after painting the wall, the effect is not satisfactory if the loss is big. Besides, you just finish brushing, feel good, the problem of the wall will appear in the future, depowdering, sagging, slag, floating color, leakage and other problems will trouble the dead) to find a company, first to ensure the effect, (not satisfied with the re-brushing, complaints.) Secondly, save time and trouble.

It doesn't cost much to let them just brush the latex paint.

Sincerely, huh!! Hehe, happy decorating!!

First of all, don't contract labor and materials, sell materials to find workers, manual about 8 yuan, my family used Dulux Jialian, and used Nippon Metri, because I didn't buy enough at the beginning.

The wall master feels that Nippon's paint seems to be a little thicker, but it is not easy to be wiped off.

Dulux is also very good, a friend who sells Nippon recommended me to use Dulux, and then because it was not enough, I made up Nippon just to try which one is good.

The two are almost the same, from an environmental point of view, Dulux is a little better.

The paint must be enough, don't let the wall master mix more water, otherwise the latex paint will fail.

Building area 79 recommended:

Primer: 18 litres per bucket is fine. You don't have to.

Topcoat: 2 barrels of 18 liters, (if you use primer, one large and one small are enough) If you want to color, don't be too light, it will become a little lighter after a week. If you want to do it yourself, you should pay attention not to mix the paint with too much water, it will be invalid, but you have to change it after two years, you should practice it now, you want to buy *** rollers, and don't forget to protect your ground with clothes that you don't use, otherwise it will be difficult to clean up. Come on!

Wall area = plane area *

First of all, look at the wall that can be depowdered, and rub your fingers back and forth to see if there is any powder falling. If you use 801 glue to brush it first, then scrape it twice with putty paste (good homesickness) and then flatten it with 360 sandpaper, and after the dust is cleaned, you can apply latex paint, which can be brushed or sprayed.

Buy ash knives, trowels, sand racks, scrapers. Latex paint brushes, brushes.

Pay attention to the yin and yang angles must be straight, the wall should be flat, and the brushing should be even.

How to use:

1. Clean the painted surface before painting.

2. Repair cracks, caves or ditches on walls or ceilings. At present, gypsum putty, large white putty or 108 glue cement putty are often used.

3. The commonly used painting methods for interior wall finishes are roller coating and brushing. For the roller coating of general coatings, it is necessary to pay attention to the amount of slurry suction on the hair roller, not too much or too little, and it is best to prepare a dipping groove to make the slurry absorption amount of the hair roller uniform and appropriate.

When painting, it is generally started from the part of the room that is the largest and most difficult to paint, first brush the ceiling, and then brush the wall. The fluff of the drum should be slightly longer so that more paint can be absorbed at a time. Due to the large area of the roof and the lack of intervals, the painting should be completed at one time, and should not be shelved halfway, otherwise it is easy to produce lap marks at the joint.

5. When the wall roller is coated, the wool roller should be applied from the bottom to the top, with force when going up, and gently back when it is downThe amount of the rolling force increases with the decrease of the paint in the wool roller, so that it does not cause flow.

6. The painting of interior wall paint finishes should pay attention to the uniform coating film and moderate thickness, not the more paint used, the thicker the coating film, the better. Conversely, if the coating is too thick, it will cause poor film adhesion, which can cause peeling.

The steps for using Nippon Paint water-based paint are as follows: use 500 sandpaper to polish along the direction of the wood grain to remove burrs and pencil strokes and other stains. Remove clean dust after sanding.

Brush with water-based paint, pay attention to evenly brushing. (Trick: brush along the direction of the wood grain, it is easier to brush evenly) and wait for the water-based paint to dry for 8 hours, lightly grind with 1000 sandpaper, and remove the dust after sanding.

Wipe the water-based color rubbing solution, wipe it in a circle mode first, wipe it evenly and then clean it in the direction of the wood grain, and dry it for more than 2 hours after wiping. Add about 10 pieces of water to the water-based transparent bottom, stir gently, and let stand for 10 minutes. Brush with water-based transparent bottom, brush along the direction of wood grain, pay attention to the uniform brushing.

Repeat 1 time between 4 and 8 hours. After the water-based transparent bottom is dry, carefully sanded with 1000 1500 sandpaper. Add about 10 water-based colored topcoats, stir gently, and let stand for 10 minutes.

Spray a water-based colored transparent topcoat, and pay attention to the uniform spraying. If the color is darker, this process can be sprayed separately for multiple times, and the color is subject to the requirements. For water-based clear topcoat, add about 10 pieces of water, stir gently and let stand for 10 minutes.

Spray a water-based topcoat, taking care to apply evenly, and repeat after an interval of 2 hours.

The use of paint is very simple, two cases:

1 Hire a painter to paint, if you use a painter to paint, you only need to buy paint and pay for the work, and you don't have to worry about anything else.

2 Paint the wall yourself, in this case, you need to buy self-brushing paint, self-brushing paint coverage rate will be better, even if the uneven painting can not be seen, the ** Yunquan water-based wall paint that was brushed on the wall is a self-brushing wall paint, and the environmental protection is world-class.

Nippon paint is divided into these two situations, that is, it depends on your own hands-on ability. It's not that hard.

Different lacquers have different ways to use, and there are clear instructions for use on the outer packaging that can be referred to.

The use of Nippon Paint is as follows:

1. Buy it back and find a painter.

2. Call the contractor who buys paint.

3. Buy your own brushes.

I don't really recommend you to use paint, because there are too many harmful substances in it, how good it is to use diatom mud, environmental protection and health, and it can also improve air quality, my home Yunquan diatom mud, I feel good, you can also try it.

Nippon Paint Latex Paint Construction Method: First Deal with the Wall 1Scrape putty (at least 2 times need to level the wall) 2

Grinding and leveling (grinding and leveling the scraped putty) 3Priming is to spray the primer out. 4.

Start spraying the topcoat, the topcoat is the final molding state, remember that the topcoat should be at least twice or more, so that it is smoother and better-looking. These are the approximate construction methods, but I personally do not recommend the use of latex paint, after all, latex paint is not environmentally friendly in the final analysis, the generation conditions of latex paint are destined to be not environmentally friendly, especially at home with a child box pregnant women are not recommended to use, my own home is freight, I use Yunquan water-based paint, water-based paint is now more environmentally friendly wall decoration materials. You can find it directly on **.

You can check it out.

Now the use of wall paint is not too difficult, most of Nippon's paint is sprayed, we usually do not have air pumps and spray guns, so it is difficult to construct by yourself, I also learned about this before, I did not use Nippon paint, because the labor cost is very expensive, I am looking for Yunquan water-based wall paint, is also environmentally friendly materials, non-toxic and non-polluting, you can use a roller to construct, children can be constructed, Tmall can be understood, you can learn about it.

With the improvement of the quality of life, many friends will choose a new type of wall decoration, and it is now very popular to choose convenient and fast wall paint. But we know that the brand of wall paint is also mixed, in fact, many friends are more worried about buying poor quality wall paint. In fact, Nippon Paint Wall Paint is a very good brand, but are you familiar with Nippon Wall Paint?

In fact, Nippon Paint wall paint is often encountered in daily life, let's get to know Nippon Wall Paint together.

What are the advantages of Nippon Paint wall paint

Protection features. Anti-corrosion, waterproof, cherry wilt and oil-proof, chemical resistance, light resistance, temperature resistance, etc. Objects are exposed to the spirit of the Great Spring Brother and are eroded by oxygen and moisture, resulting in metal rust, wood decay, cement weathering and other damage phenomena.

Coating the surface of the object to form a protective film can prevent or delay the occurrence and development of these damages, so that the service life of various materials can be extended. Therefore, the protective effect is one of the main functions of the coating.

Decorative features. Color, gloss, pattern, flatness, etc. Objects of different materials can be coated with paint, which can get a colorful and colorful appearance, play a role in beautifying the living environment of human beings, and make contributions to the material life and spiritual life of human beings that cannot be ignored.

Other features. Some modern coating varieties can provide a variety of different special functions, such as: electrical insulation, conduction, shielding electromagnetic waves, anti-static generation and other functions; biochemical effects such as anti-mildew, sterilization, insecticide, and anti-adhesion of marine organisms; High temperature resistance, heat preservation, temperature indication and temperature marking, prevention of flame retardation, ablation and heat insulation; Anti-slip, self-lubricating, anti-chipping and splashing and other mechanical properties; There are also various functions such as noise prevention, vibration reduction, sanitation and disinfection, condensation prevention, and ice prevention.

Precautions for the use of Nippon Paint wall paint

1. Stir the paint liquid thoroughly from top to bottom before use.

2. When using, please accurately mix the curing agent, add the thinner according to the actual construction environment, and then stir evenly.

3. Unused paint cannot be poured back into the original packaging.

4. The curing agent can react when exposed to water or moisture, please close it in time after opening the can.

5. If impurities are mixed in use, it is advisable to filter it with 200 mesh mesh before putting it into use.

6. It is not suitable for construction under the condition that the temperature is lower than 5 or the relative humidity is greater than 85%, and the principle of thin coating is followed many times during construction, especially when the plane is coated, the one-time over-thick coating will bring blistering, whitting, slow drying and other paint film drawbacks.

The above is a detailed introduction to Nippon Paint Wall Paint, read the above we know that Nippon Paint Wall Paint has a significant effect, many friends are very fond of Nippon Wall Paint, Nippon Wall Paint is the leading brand in the topcoat market, with its high-quality products and services to win the majority of users, and Nippon Wall Paint quality is reliable, safe and secure, after-sales service is also very good, through the above detailed introduction, I believe that we are more familiar with Nippon Wall Paint Spine Cave Sutra, I hope my introduction can help readers and friends.

You can get it for free

Kiss! Hello, happy to answer your <>

The use of primer and topcoat of pro-Nippon paint is as follows: How to use primer and topcoat 1. What is primer?

1) The primer is usually off-white, and has a certain viscosity of the liquid, can be directly applied to the surface of the paint paint, is a paint system, used to improve the adhesion of the topcoat, increase the fullness of the topcoat, improve the decoration of the topcoat, provide alkali resistance, provide anti-corrosion function, etc., at the same time can ensure the uniform absorption of the topcoat, so that the paint system can play an effect. 2) The more common primers in life include phosphate primer, new asphalt ship primer, new metal primer, amino alkyd acid secondary primer, epoxy resin primer, etc. Among them, phosphating primer is often used as a primer for essence substrates; The new bitumen ship primer is used for the underwater part of the ship; The new metal primer is used for priming metal surfaces; Aminoalkyd acid secondary primer is mainly used for coatings in the middle layer, which is suitable for the layer of putty that has been coated with primer or has been sanded and smoothed; Epoxy resin primer has good salt spray resistance and can be used as an excellent anti-rust primer.

2. What is a topcoat? 1) The topcoat is usually a clear, transparent liquid with a certain brightness. The difference is mainly that it has brightness, and then there is a yellowing-resistant topcoat.

In the whole coating process, it is used for 1 2 times of overlay coating, that is, the coating used for the outer layer of paint film in contact with the outside world of wood products, which almost determines the appearance of the entire product (color, gloss, visual sense, feel, etc.) image of the material, and the topcoat has a series of perfect decorative protection properties, such as varnish transparency, smooth feel, hard and wear-resistant, heat-resistant, water-resistant, chemical-resistant, easy to construct, etc. 2) Both primer and topcoat belong to latex paint, and they usually need to be used in both. When painting the wall, generally after the putty is completely dry, the primer needs to be brushed, usually the primer needs to be brushed twice, because the wall has a relatively large paint surface, so when adjusting the primer, you need to add more water moderately, so that you can ensure that the primer is evenly painted; The topcoat generally needs to be painted three times on the wall when painting, and it can not add too much water like the primer, because adding too much water will affect the feel, thickness and hardness of the paint film, so only add a little water when brushing the topcoat.

Hope mine can help you <>

Do you have any other questions?