How long does it take for the fish tank wave pump to be on, and does the water pump in the fish tank

It is best to keep the surf pump on all the time to maintain a good underwater environment.

The main function is to make the water in the fish tank "rotate", imitating the natural water flow, so that the water flow in each water layer of the fish tank is even, and there will be no stagnant water.

District. However, when the fish tank reaches a certain length, there will be areas that cannot be reached by the filtered water flow, which is often referred to as still water areas or dead water areas.

If you use the filtered fish tank, you will intuitively see that except for the water flow impact in the water area, there will be floating objects in the water and the accumulation of garbage and sediment.

Different types of pumps vary in how long they last.

There are two common types of wave pumps, one is one that can only produce a fixed flow of water, see the figure below

This pump can be turned on during the day and turned off at night after the lights are turned off, which is more convenient to control with a timer.

The other is controlled by the chip, which can adjust the start-up intermittent to produce back and forth surges and change the water flow, as shown in the figure below

The pump is usually open and open, and it can be set to automatically sense the surrounding light, and when the surrounding light is dimmed, it will automatically run with the minimum flow of water.

Premise: The wave pump can flush fish feces into the outlet of the fish tank in a short time. Then, the wave pump can be turned on all the time, and it can not stop at night, practice has proved that koi and grass gold will not only not be tired to death, but healthy words, the water is as clear as well water, air tank, bare tank.

Seawater? Seawater often comes, and fresh water doesn't matter.

The pump in the fish tank needs to be on all the time.

The water pump in the fish tank should be turned on all the time, and it should not be stopped, especially at night, the pump needs to be in a running state, otherwise it is easy to cause shutdown and no one will find out, and it will lead to insufficient oxygen in the fish tank for a long time, affecting the survival time of the fish. And the water pump is turned on not only to provide oxygen to the fish, but also to make the water in the tank come alive, creating a suitable environment for the fish to grow.

Considerations for choosing a water pump

1. The size of the cylinder block

This is mainly the volume of water in the whole cylinder, and the flow rate of the water pump is generally 7-10 times per cylinder of water.

2. The size of the filter bin

Because the larger the volume of the filter bin, the more filter media can be added, the larger the filtration area of the filter media will be, and the larger the overall filtration area will be; At the same time, this means that the large filter chamber can withstand the passage of a larger water flow.

3. Fish density

The more fish and the more they eat, the more excrement will be produced, and the greater the flow will be required to circulate the clean water body; At the same time, many little white aquarists find that the feces cannot be pumped, which is often caused by the low power of the pump and the insufficient pumping capacity.

4. The size of the fish

Sometimes it is also one of the factors affecting the choice of water pump, and the gravitational force of the water flow generated by the work of the pump has little effect on medium and large fish; Mainly some small fish and newly hatched seedlings who like still water, because of their poor swimming ability, are easily adsorbed by the strong water flow of the water pump, which can damage the gills at least and directly kill them.

<> "Many owners have fish farming at home, and the equipment is relatively complete, but if you are a novice, you may not know many aspects, such as the fish tank pump should be turned on all the time?

1. Should the fish tank pump be turned on all the time?

Need. Because the main purpose of the pump in the fish tank is to provide oxygen to the fish, it needs to be turned on for a long time without interruption, so that there is enough oxygen in the water to ensure the survival of the fish. In addition, after the fish tank pump is turned on, it can enhance the water circulation, make the water come alive, and provide a more suitable living environment for the fish.

2. What should be paid attention to when using a fish tank water pump?

1. Because the water pump is an electronic product and is used in water, and the water is conductive, it is necessary to pay attention to the safety of electricity when using it. Before use, the power supply of the pump should be checked, if it is found that there is a broken line, it can not be used, if it is found to be damaged during use, it is necessary to disconnect the power supply immediately to avoid electric shock.

2. During the operation of the water pump, the oxygen supply is completed through the rotor and water blades, so in order to ensure sufficient supply, the rotor and water blades need to be cleaned regularly during the use process. Especially when the water quality is relatively hard, it is easy to scale in the water, and the situation is serious, which will directly affect the operation of the pump.

3. In the process of use, if you need to clean the water pump, then you need to disconnect the power supply of the water pump first, then settle the fish, and then clean the water pump and fish tank, so as to ensure the safety of the cleaning people and fish at the same time. In addition, in the process of cleaning and washing, it is necessary to check whether the filter cotton and other equipment are in good condition, so as not to affect the filtration effect.

The fish tank should be added to the top of the pump to ensure that the pump will be submerged in the water all the time, which will reduce its temperature. It should be noted that in summer or dry times, the water level should be raised appropriately to ensure that it exceeds the pump by about 2-3 cm, so that the water pump is exposed after the water evaporation. This kind of equipment can play the function of oxygenation and filtration, and the rotor and water blades should be cleaned regularly.

What is the function of the water pump: 1. Water flow: The biggest function of the water pump is to keep the water flowing, so that the original stagnant water can become living water, and the flowing water is not easy to perish, so that the water quality can be maintained.

If the water quality is well maintained, the fish can survive healthily, otherwise the water needs to be changed regularly to improve the water quality. 2. Convenient filtration: Only when the water in the fish tank flows, can it be convenient for water filtration.

The water will pass through the filter box, and after passing through the layers of filter media, impurities will be left behind, and the water will become clear. Filtration is especially important for fish tanks, which are usually turned on 24 hours a day. 3. Improve dissolved oxygen

When the pump is working, some air can be brought into the water, which can increase the dissolved oxygen. The level of oxygen in the water plays a very important role in the respiration of the fish, and if there is a lack of oxygen, the fish can easily float their heads and even die after a long time.

The wave pump is not always turned on well, which will affect the rest of the fish at night, and it is best to turn it on during the day and turn it off at night. The main function of this equipment is to strengthen filtration, and bring the dirt at the bottom of the water into the filter tank by lifting the water, so as to make the fish tank cleaner and the water quality can be better maintained. In addition, some fish need the current to speed up their swimming in the water, which is helpful for their health and growth.

The wave pump in the fish tank does not need to be turned on all the time, because the main function of the wave pump is to create a water flow, which can simulate the flow of wild waters and allow the fish to move. However, most of the fish will be in a resting state at night, and if the wave pump is always on, they will not be able to rest well. Therefore, the wave pump in the fish tank can only be turned on for 2-3 hours during the day, and it needs to be turned off at night, so that the fish can grow better.

The role of the fish tank wave pump:

The reason why the wave pump is used in the fish tank of ornamental fish, of course, its main role is not to make waves, haha, although the fish tank of ornamental fish is not a still water environment, but most ornamental fish do not like the fish tank has a relatively strong water flow, which we must first be clear. Then the main function of the wave pump in the fish tank is only one, that is, to push the fish feces and impurities at the bottom of the fish tank to the bottom of the fish tank and the water of the fish tank, that is to say, if this thing is only for its main role, there is no need to place it in some fish tanks. The secondary function of the wave pump is to make the water temperature in the fish tank more quickly equalized, especially in large tropical fish tanks, if we only place a heating pipe, it may cause the local water temperature of the heating pipe to be too high, and the water temperature in the fish tank will not spread quickly, and the existence of the wave pump can make the water temperature quickly equalized.

Another is that for some large ornamental fish, the existence of a wave pump in the fish tank can moderately exercise the ornamental fish, making them more robust and stronger, and their appetite is more vigorous. <>