What to do if the cyclamen branches droop? What is the reason for the separation of the branches of

The droopy leaves of cyclamen can be caused by several reasons. The first is that the plants are short of water, so you can replenish the water by soaking the pots and placing them in a cool and ventilated place, so that the cyclamen leaves will stand up in a while. The second is that the water is big and the roots are rotten, and the rotten parts need to be removed and replanted.

The third is that the light is too strong, move the plants to a cool and ventilated place, and the plants can slow back.

1. Lack of water and drought.

Causes of leaf wilting: Cyclamen leaves drooping, first of all, consider whether the plant is short of water, you can use your hands to weigh the weight of the potting soil, feel obviously lighter, it means that the soil is dry, and the leaves of the plant are caused by lack of water.

Solution: Replenish the water for cyclamen by soaking the pot in a pot, usually for 15 minutes, take it out and put it in a cool and ventilated place, wait until the leaves of the plant stand up, and then maintain it normally.

Second, the water is rotten roots.

Cause of leaf wilting: Cyclamen leaves drooping, weigh the weight of the potting soil with your hands, feel still very heavy, observe whether there are signs of mold and rot at the roots of the plant, if there is an indication that the roots are rotten by water, and the leaves of the plant are caused by excessive watering.

Solution: If the cyclamen has rotten roots and stems, it is necessary to remove the rotten parts and then plant them and control the watering.

3. The light is too strong.

Leaf wilting reason: cyclamen leaves drooping, observe the maintenance environment, if it is placed in an outdoor place where the sun is too strong, it may also be suddenly exposed to the sun, the cyclamen wilted.

Solution: Move the cyclamen to a cool and ventilated place in time, and if it is due to sunburning, the plants can be relieved in half a day if the soil is well hydrated.

How to maintain cyclamen, let's find out today!

The main thing is the change of the environment, including water and fertilizer, light and temperature.

1. Moisture factor; Lack of water is the most common reason, cyclamen can not be short of water, if the cyclamen is not fully watered, a short period of time in the hall and quietly lack of water, there will be a wilting phenomenon of flowers and leaves, generally after watering, the leaves can be restored.

2. Light and temperature; Changes in light and temperature can also cause the cyclamen to wilt its leaves. Generally, when cyclamen is just bought home, do not place it on a balcony or windowsill with strong sunlight, otherwise it will wilt and become prone to water shortage. Of course, the temperature should not be too high or too low, as it is easy for the cyclamen to wilt and wilt, so keep the temperature reasonable and keep it away from heating.

3. Bulb rot; If the bulb rots, the plant will wilt and the rotten bulb tissue needs to be scraped off and repotted after the wound has healed. Generally, you can apply some plant ash to let the wound dry and heal.

There are three reasons why the cyclamen flowers droop down: the first is not to water them immediately after they are bought, but to wait for the period to acclimatize to the environment and then water them slowly, the second is not to bask in the sun immediately, but to move them indoors to a cool and cool place, and the third is not to change the pot immediately, but to keep it cool and ventilated, and wait for the first flowering time before changing the pot.

1. Causes

There may be three reasons for the flowers to fall down, the first is that you can't water it immediately when you buy it, and then water it when the soil is dry after the plant adapts to the environment, the second is not to bask in the sun immediately, put it under scattered light for a week, and the third is not to change the pot immediately, you can only change the pot after the first flowering, otherwise it will lead to poor growth of the flowers and leaves.

2. Suspend watering

The first thing to do is to suspend watering when the cyclamen flowers are pulled down, and the cyclamen should not be watered in too humid environments, especially if there is no water accumulation, and the watering should be suspended for a period of time before watering has eased. If the situation is more serious, you can change the soil, choose soil with better air permeability and drainage, and follow the principle of seeing dry and wet watering.

3. Indoor maintenance

If the temperature is too low, the plant suffers from frost damage, and the flowers will droop down, which is common in autumn and winter when the temperature drops, the optimum temperature for cyclamen is 10 to 20 degrees Celsius, when the temperature is below zero degrees Celsius, it should be moved indoors to a warm place, and if frostbite is severe, it should be replanted.

4. Cool and ventilated

Cyclamen usually have difficulty adapting to the environment when they are first bought, so they should be kept in a cool and ventilated place for a period of time, avoiding too much sunlight, preferably not seeing the light, stopping watering at this time, waiting for a week or so before moving it to a normal environment for maintenance, and then watering it again after the soil is dry.

<> cyclamen should be pruned in time after flowering, usually around May every year, when pruning should be cut from the roots of the flower branches, and then minus the yellowed leaves and branches that do not grow well, after pruning, the cyclamen will enter a dormant state, and after the leaves have fallen off, they can be stored indoors in a shaded environment, or they can be dug out and refrigerated.

1. Prune the potatoes carefully after flowering.

Cyclamen blooms early, usually from November to May, and is pruned before summer dormancy to avoid nutrient depletion, maintain soil fertility and prepare for the next flowering, pruning from the roots of the branches, and subtracting yellowed leaves and poorly growing branches.

2. Post-maintenance.

After pruning, the temperature gradually rises, the cyclamen will go into a dormant state, and after the summer temperature rises, the climatic conditions vary slightly from region to region, and after entering the dormant period, the leaves of the plant gradually wither and wither, and finally all the leaves fall off, leaving only a ball, which is maintained at a temperature of about 20 degrees Celsius, which can keep the bulb hard.

3. Avoid shade and storage.

The main reason for cyclamen dormancy is that the temperature is too high, so keep it cool and ventilated during storage, transfer the pots to an indoor environment to avoid the shade, stop fertilizing during storage, observe the dryness and wetness of the potting soil, and water a small amount to avoid the soil drying out completely, but not too much watering to avoid root rot.

4. Dig out and store.

In areas where the summer is hot and long, the bulbs should be removed and refrigerated. When the leaves turn completely yellow around July, you can take out the bulbs, wash the soil on them, soak them in carbendazim solution for about 20 minutes, wrap them in newspaper or plastic wrap after natural air drying, and refrigerate them in the refrigerator until about September.

1. Insufficient light.

Cyclamen is very light-loving, and can be conducive to flowering when there is enough light, but if it is kept in the shade for a long time, it will not be able to give birth to flower buds normally, and it will only grow leaves without flowering. Choose a suitable maintenance location and move it to a sunny location to maintain it to promote nutrient accumulation and vigorous flowering.

2. Improper fertilization.

Cyclamen requires nutrients to bloom, and if it is not properly fertilized, it will also cause it to grow leaves without flowering. Long-term fertilization is insufficient, and there is a lack of sufficient nutrients, and it is difficult to bloom normally. If too much nitrogen fertilizer is applied and phosphorus and potassium fertilizer is neglected, it will cause branches and leaves to grow and it will be difficult to differentiate flower buds.

Before flowering, too much nitrogen fertilizer should be avoided, and nitrogen, phosphorus and potassium compound fertilizer can be applied to obtain sufficient potassium and phosphorus, which can be conducive to flower bud differentiation.

3. Overwatering.

Lack of water in cyclamen can cause the leaves to become soft and the branches wilt, but if you water too much, the roots absorb a lot of water, which will cause the branches and leaves to grow wildly, limiting the differentiation of flower buds, and the leaves will grow instead of flowering. Watering can be controlled and the soil can be kept moist but not waterlogged before flowering.

Fourth, improper pruning.

This can also happen if the cyclamen is not pruned properly, with lush foliage and excessive consumption of nutrients. It can be pruned properly, and the old leaves and rotten leaves can be cut off to retain enough nutrients to promote flowering.

Summary. Clean up the soil of the root system, do not damage the root system, disinfect with potassium permanganate, soak for half an hour, let the water air dry naturally and then put it on the pot, and let the lower part absorb water and ventilate the upper part, let the cyclamen take the pot and re-sprout and flower.

What to do if the cyclamen wilts.

Clean up the soil of the root system, do not damage the root system, disinfect with potassium permanganate, soak for half an hour, let the water air dry naturally and then put it on the pot, and let the lower part absorb water and ventilate the upper part, let the cyclamen take the pot and re-sprout and flower.

That's it. Yes, take your time, you have to have a recovery period.

Shading and sun protection, the stems of cyclamen flowers droop down, which may be caused by too much light, and it is necessary to build a shade net above to shade it; Loose soil drainage, soil waterlogging, roots will droop after waterlogging, and the plants need to be transferred to a cool environment for maintenance in the later stage; Dilute fertilizer, too much fertilizer will make the root system be burned and droop, need to water to dilute the fertilizer; Warm up and keep warm, keep the room temperature between 18 and 28.

The stalks of cyclamen may be drooping due to strong sunlight, resulting in severe water loss and drooping in the leaves. Once found, the cyclamen is moved indoors to a ventilated and shaded environment for maintenance, and after a period of time, the leaves return to normal. Later, in the summer, when the sun is too strong, a shade net is built above the cyclamen to protect them from the sun.

Cyclamen itself is not very tolerant to waterlogging, and if you water too much or too often at one time, it will cause a lot of water to accumulate in the roots, which in turn will cause the flower stems to droop. Once discovered, the cyclamen should be moved to a ventilated and shady environment for maintenance, and the soil should be loosened appropriately to speed up the evaporation of water in the soil so that it can resume growth as soon as possible.

Cyclamen has a low demand for nutrients during the growing period, and if too much fertiliser is applied at one time, the roots will be burned, resulting in poor growth. When found, pour plenty of water along the edge of the pot to let the fertilizer in the soil flow out of the pot along with the water. If the situation is more serious, it needs to be repotted and re-cultivated for maintenance.

Cyclamen grows in warm environments, is slightly cold-tolerant, but is not tolerant to extreme heat and is sensitive to temperature changes, and can grow healthily in an environment of 18 28, where high or low temperatures can cause the flowers to droop. Therefore, in summer and winter, it is necessary to take measures to cool down and keep warm.