How to accept ceramic tiles, what aspects need to be paid attention to?

Introduction: Then we must look at some details when accepting, first of all, to see whether the direction of the tiles is consistent. If the direction is inconsistent, it will greatly affect the beauty of the whole room, and at the same time, it will make the whole decoration look very cumbersome.

Then you should also see if there is a bulge, if there is a bulging situation, it may be in the process of use, the tile is very easy to break. <>

There are many things that you need to pay attention to in the process of decoration, and some people may choose to put tiles on the walls or floors. Because this way, it is also much more convenient when cleaning. Then when accepting the tile, you must look at some small details, first of all, you can see whether the direction of the tile paste is consistent.

Because there will be some patterns on each tile, if the direction of the paste is inconsistent, it may affect the aesthetics of the room. And it will also make the decoration of the whole room look particularly cumbersome, because the pattern on the tile is more special, so there is a certain amount of attention when pasting tiles. <>

In addition to looking at the direction of the tiles, it is also necessary to see whether the tiles are bulging. If you find a bulge in the process, you must ask the staff to re-paste it. Because there is a bulge that may affect the normal use of the tile, and it is also very easy to chip in the process of use.

If the tiles are broken in the process of use, it is particularly troublesome to repair, and it costs a lot of money. But there are some people who will always ignore these small details, and once they ignore these small details, it may also have a lot of impact on everyone. <>

If it is very simple to see if the tiles are bulging, you can hit the floor with a hard object at this time. In this process, you will find that the sound produced by the tiles is relatively full. If you find that the sound is not quite right during the process of tapping, you must communicate with the staff in time.

Let everyone soak the tiles in water for a period of time before putting them on the tiles. In this way, it is better to operate in the process of pasting, and it can also prolong the service life of the tile. Do not walk around on the freshly pasted tiles immediately, as this will also affect the brick surface.

At the time of acceptance, you should look at the fit of the tile, and you should pay attention to whether the tile can be waterproof, and you also need to see if there are wear marks on the surface and whether there is a gap in the middle.

Whether the tiles meet the requirements, whether there are scratches on the surface, slope inspection, check the hollow drum rate of the tiles, and check the squareness of the yin and yang angles.

In this way, pay attention to the flatness of the tile, pay attention to the gap of the tile, and the surface of the tile, pay attention to the way the tile fits, and also pay attention to whether the wall is flat.

The acceptance of ceramic tiles is very important, and the requirements are also very strict, and the owners who are not clear must learn more, especially the craftsmanship of the construction master should be paid more attention to. Otherwise, there is a risk that the tiles will be uneven or fall off in the later stage. Today, I will talk to you about how to accept the ceramic tile acceptance, and the tile acceptance needs to be noted with Li Yi, I hope it can be of some help to you.

First, how to accept the ceramic tile acceptance.

1. Check the empty drum.

The tile has just been paved and cannot be checked for hollowing, and the hollowing phenomenon is generally checked in time on the third day after the tile is pasted. We can use a small hammer to gently tap the tile, if the sound it makes is low, it means that there is no hollow drum, if the sound it makes is crisp, it means that the tile has a hollow drum.

2. Yin and yang angle inspection.

There are some yin and yang corners in the wall tile paving, and each corner should be checked for squareness, the standard is of course 90 degrees, and slight deviations within 3mm are allowed. If the yin and yang angles deviate greatly, it will affect the placement of wall paintings, shelves and other items in the later stage. You can use a right-angle ruler for inspection, but if you don't have one, you can prepare 2 tiles and 1 ruler.

3. Detect the flatness of the tile.

The unevenness of the tiles not only affects the appearance, but also is likely to be tripped inexplicably in later life. During the acceptance, the flatness should be inspected with a level tester, and the error should not exceed 2mm, and the height difference of adjacent bricks should not be exceeded. The reason why most tiles are uneven is that after the tiles are paved, someone steps on them before they are completely dry.

Second, what needs to be paid attention to in the acceptance of ceramic tiles.

1. Pay attention to the number of tiles.

The first thing to verify when the tiles arrive is the quantity, to see if the number of tiles purchased is consistent with the actual number of arrivals. Whether it is a whole box of bricks or chamfered bricks, the quantity must be counted on the spot, so that it can be accurate, and the manufacturer will be out of stock immediately.

2. Pay attention to 3C

If the water absorption rate of the floor tile is below and there is no 3C, it can not be used, and the water absorption rate exceeds as long as there is an implementation standard that meets the national standard.

3. Pay attention to the slope of the bathroom tiles.

Toilets, balconies and other spaces with drainage requirements should maintain a certain slope on the ground to facilitate drainage, with a slope of not less than 3%, and the floor drain should be in a water-walking position. When inspecting, you can pour water into the shower area or other floor drains to see how fast the water is draining and whether there is standing water on the floor.

The above is the relevant information about how to accept the ceramic tile acceptance and what you need to pay attention to in the ceramic tile acceptance, I hope it will help you.

Brand store: Oushennuo tiles.

1. Check the outer packaging of the tiles.

1) Carefully check whether the relevant logos on the packaging box of the product are clear, including the brand, trademark, model, color number, specification, production batch number or production date of the product;

2) There is also a key point is to check whether the factory address of the packaging box is accurate, now some bricks of particularly poor quality have not left a complete factory address or ** on the packaging box, like such a "** industrial zone", did not say which province, which city, ** is to leave a mobile phone number!

2. Check whether the delivered products are consistent with the order.

1) Check whether each model of the tile is consistent with the model on the order form;

2) Check whether each model of product sent is consistent with the inspection;

3) Check whether the embryonic tile trademark of each tile is clear and correct, so as to prevent merchants from stealing beams and changing columns! Now there are many ceramic tiles with similar colors, but the brands will be different, and the quality may also be very different, so you also need to pay more attention!

4) Check if there is any omission of the delivery variety!

Nobel tiles.

3. Check the number of tiles.

Carefully check the number of tiles, paying attention to the conversion between the number of tiles and square meters.

4. Check the quality of the tiles.

Focus on the following aspects:

1) The quality of the pieces and pieces, whether there are surface defects such as kowtows and scratches, and whether there are any bumps on the waistline of the tiles;

2) Check whether the tiles are damaged, you can shake the packing box with your hand, listen to whether there is a "crunch" sound, there is a "crunch" sound indicates that the tiles may be damaged, be sure to open the box to check! 3) Check the flatness of the tile: take out two pieces of the same type of product on the horizontal surface, and slide along the edge of the tile back and forth with the tip of the two hands, if there is no obvious feeling of lag when passing through the sealing of the tile, the size of the tile is better, the error is small, and the smaller the size error, the better the paving effect of the tile!

On the contrary, if there is an obvious feeling of sluggishness in the tile, it means that the size error of the tile is large, which will affect the effect of paving!

4) Check the flatness of the tile, two or four pieces of the same type of tile according to the same texture on the plane, with the hand on the brick surface back and forth, if the joint part of the tile is not obvious high and low, indicating that the flatness of the tile is good, on the contrary, the flatness of the tile is poor, will affect the overall effect of tile paving, if the flatness of the floor tile is poor, the serious situation will also trip people! 5) The problem of the straight angle of the tile. Now the tile is mainly rectangular, each corner of the tile is a right angle, if the straight angle is poor, it will also affect the paving effect of the tile, take four bricks of the same model, splicing, if there are four bricks can not be tightly jointed, always one or two joints appear gaps, indicating that the straight angle of the tile is not particularly good.

5. Calculate the unit price and total price of ceramic tiles again, and pay the full amount without any problem.

Link: Qijia Classroom: Misunderstandings of Tile Purchase.

1. The variety, specification, grade, color and pattern of the tiles paved on the wall and floor tiles should meet the design requirements.

2. The surface of the tile is clean, the pattern is clear and the texture is consistent, the joints are uniform, there are no scratches, no color difference, no cracks, no pollution, lack of edges and corners, etc.

3. If there is a hollow drum in the tile paving, then it is easy to loosen, fall off, crack, etc., and if you punch holes in the tile parts with hollow drums in the future, this tile is also very easy to break, so checking whether the tile has a hollow drum is an important step in acceptance: use a small hammer (or screwdriver and other things) to knock on the 4 corners of the tile and the middle part to listen to whether there is a hollow sound, if there is a hollow drum in the middle, or there are more than two hollow drums in the corners, it is best to pick up the brick and re-paste. The hollow drum is controlled at 5% of the total number, and the area of a single hollow drum does not exceed 10% (there shall be no hollow drum on the main channel).

4. Check the surface flatness of the tile, use a two-meter-long ruler to lean on the surface of the pasted tile, allow an error of 2mm, and the height difference of adjacent bricks shall not exceed 1

5. Use a right-angle ruler to inspect the yin and yang angles of the tiles, and allow an error of 3mm.

6. The slope of the surface of the tile meets the drainage requirements, no backflow water, no stagnant water, and the combination with the floor drain is tight and firm.

7. The width of the floor tile joint is 1, not more than 2, the hook joint is uniform, straight, the gap at the junction with the wall is appropriate, and the baseboard can completely cover the gap.

How to carry out the acceptance of the paved tiles (first set).