-
Material: Wool.
Stick needles. Here's how:
<>3. After subtracting, continue to knit the shoulder at the same height as the back piece, and then sew the shoulder.
Fourth, then pick up the collar part that has been left behind, a needle's eye.
Pick a needle and complete the needle collection.
-
Many people don't know how to retract the needle when knitting sweaters, so I'll tell you about this sweater I knitted myself.
1 The collar of this sweater is a round neck, (see my other sharing for the pattern and color matching method of the sweater) Let's talk about the back piece first, the back piece is relatively simple, after leaving the collar part, the shoulder part is woven in a line minus two stitches and then knitted a row of stitches. (The subtraction here refers to the subtraction of the side by the collar).
Needle retraction method in the anterior part:
21-5-1 Divide the front piece in half and knit one row and the second row minus 5 stitches.
2-4-1 Subtract 4 stitches every two rows, minus 1 time.
2-3-1 Subtract 3 stitches every two rows, minus 1 time.
2-2-2 Subtract 2 stitches every other two rows, minus 2 times.
2-1-2 Subtract 1 stitch every two rows, minus 2 times.
3. After that, continue to knit the shoulder to the same height as the back piece, and then sew the shoulder.
4. Pick up the collar part that is left behind, and pick a needle with the eye of a needle.
5. After weaving a single-thread needle (one flat and one reverse), such a round neck can be woven with a low neckline, a high neckline, and a lapel, which is according to personal preferences.
-
Tools Raw materials: wool thread, wool needle.
1. Prepare the wool and wool needle, and take the demonstration of knitting and digging the round neck, as shown in the figure below.
2. The first step is to divide the collar. When the sweater is knitted to the neckline, the collar begins to split. Method: When knitting the needle on the front, take the 12 needles in the middle of the front piece and thread it, as shown in the figure below.
3. The second step, next, weaves the left and right sides of the front piece at the same time. Take another ball of yarn on one side. When you start to weave the right side, use the right wool, and when you knit to the left, use the left wool to weave, as shown in the figure below.
4. The third step is to collect the needle. Knit 1 needle on both sides to the neckline, 4 needles in 8 rows, and one needle in 2 rows, as shown in the figure below.
5. The fourth step, then continue to weave both sides upwards to the shoulder, as shown in the figure below.
6. After weaving. Continue to weave the back piece upward, about 10 cm higher than the previous piece, and then leave 14 stitches in the middle. Leave 2 more stitches than the previous film. 2 needles on each side of the needle as shown in the figure below.
7. Suture. When knitting to the neckline is the right size, start sewing the shoulders of the front and back pieces, and the stitching is done on the reverse side, as shown in the picture below.
8. Pick up the collar. After the collar is picked up, knit one needle on the needle, one needle on the needle, and knit it to the desired length, as shown in the figure below.
9. In this way, the sweater is knitted with a round neck, as shown in the figure below.
What you need to know before knitting a sweater:
1. Preparation - Decide the purpose of the knitting products and the object of wearing.
2. Select paper patterns or knitting patterns (such as ingots needles, upper and lower needles, rib needles or some patterns, etc.......
3. Buy suitable wool and knitting needles - the number of yarns required and the required knitting needles are listed on the paper pattern, as long as you follow the instructions on the paper pattern to buy
4. Make a knitting elastic standard - according to the label of the wool thread, with the required knitting needle, weave the standard number of needles, knit the low needle on the front, knit the high needle on the back, and then close the needle. If this small square is 10 cm x 10 cm, you can start weaving according to the paper pattern.
If the finished product is larger than 10 cm x 10 cm, it is loose; If it is less than 10 cm x 10 cm, it is tighter. Too loose and fine; to knitting needles; Knit too tightly with a knitting needle as large.
-
From top to bottom, weaving the front and back collar drops, half a circle of weaving back and forth, also called return.
-
The method of stitching the neckline of the sweater is to keep the left hand still and pick out the first stitch in the left hand from the bottom to the top of the right hand. In the same way as a flat needle, the needle of the right hand is passed directly through a hole in the thread of the left hand from the bottom up.
Wrap the thread of the right hand around the needle of the right hand from back to front, pick out the bypassed thread again, use the needle of the left hand to pick up the first hole of the right needle, and then press the second thread backwards to pick it out, leaving the second thread on the top of the right needle, and weave it to the last needle according to the above steps to complete the needle.
Needle collection refers to a method of knitting at the end of a knitted fabric. It can be retracted by crocheting (low needle surface). Fixed needle (flat knitting needle method) low needle. Fixed needle (flat knitting needle method) high needle.
The last stitch is retracted, 1x1 (one stitch high and one stitch low) rib knitting fixation (elastic stitch retraction method). 2x2 (two needles high and two needles low) rib knitting fixation (elastic needle collection method x1 ring knitting rib knitting fixation (elastic needle collection method), 2x2 ring knitting rib knitting fixation (elastic needle collection method), needle fixation (flat knitting needle collection method), use rod needle to do needle collection (low needle surface low needle needle closure).
A little trick to loosen the collar of the sweater
If it is a sweater with a large pinhole, you can directly choose a good-looking ribbon. Thread the ribbon through the pinhole of the sweater to create a nice string look. Then adjust the tightness of the ribbon according to the size that suits you.
Finally, tie a nice bow, which is a very sweet and foreign way, and at the same time make the loose sweater collar smaller.
If you have a sweater with a small pinhole, you need to replace the beautiful ribbon with a thread of the same color as the sweater. Use a pin to thread the needle through the collar of the sweater, and finally adjust the right tightness. It is also a relatively simple and practical way, you can talk about the loose collar of the sweater to make it smaller.
-
As shown in the figure below, the solid line is the part that has been woven, and the dotted line is the part that has not been woven.
Step 1: When you want to divide the collar, first find the center point of the front piece as the O point. From point O to point A and point B on both sides of the 5 stitches, a total of 10 stitches, for the lowest part of the collar, these 10 stitches are not woven first.
Step 2: Knit a back and forth from point B to the right rotator cuff, and when you return to point C, leave 4 stitches of the BC segment, do not weave, and return to the AB segment just now.
Step 3: Knit a back and forth from point C to the right rotator cuff, and when you return to point D, leave 3 stitches of the CD segment, do not knit, and return to the ABC segment just now.
Step 4: Point E and F and so on, until point F is received, and then you don't need to collect it anymore, just weave it up.
-
Some hand-knitted sweaters are knitted first at the waist and body, with split sleeves, at the shoulders, and finally with a stand-up collar and a round neck. 2/6
The weaving of the neckline is chosen according to the body type, and the fat person has more needles on the neckline, otherwise there will be less. 3/6
When weaving the neckline, it is also necessary to decide according to the shoulder sleeves, the number of needles in the neckline can not be more or less, and the neckline will be woven bigger, and the number of needles will be less than the upper clothes. 4/6
The choice of a round neck for a sweater depends on the weave from the bottom up, leaving a round neckline when the predecessor, and finally picking a needle to the neckline, with a single-sided collar and a double-sided collar. 5/6
The double-sided neckline should be knitted on one side and then sewn into a double-sided with a wool needle, so that the round neckline is very straight.
Hot Ads
Plus-size**Lace-up V-neck undershirt women's 2021**Korean version Spring and Autumn round neck trim top short sleeves.
168 yuan view
Plus-size**Personality slit solid color crewneck short-sleeved dress, mid-length chubby woman, loose casual and versatile V-neck.
$158 view
Nibber Versatile Crewneck Long-Sleeved Cover-Up Shirt Underneath V-Neck Slim Solid Commuter Cropped Blue Suspenders Two-Piece Set.
$43 view
Fall**ripped off-the-shoulder top, plus-size base layer, fat mm**, long-sleeved t-shirt, V-neck, round neck.
$55 view6
6. The knitting method of the round neck of the sweater should be selected according to the body type of the person, whether it is woven from top to bottom or from top to bottom, and the weaving method of the round neck is single-sided or double-sided.
-
The front piece is 3 inches less than the back piece, in the middle of the front piece of the clothes, one-fifth of the number of stitches of the empty piece of clothing, (100 stitches is empty 20 stitches) The number of stitches in the collar is a little more than the number of stitches on the shoulder, taking into account that there is also a collar edge, and then start to collect the needles on both sides, with 100 stitches as a column, and then 10 stitches after each (one stitch on the knot until the end of the knot) to the same length as the back piece.
-
This really won't, go home and ask my mother, my daughter-in-law will definitely not, you are quite hearted, happy.
-
The knitting method of the rear collar socket of the sweater is as follows:
Combined with clothes from the bottom up, the sleeve cage can be stitched in advance, if the length of the armcage is enough, or the size of the bust is not enough, the armpit can be stitched in advance, and the armpit can be stitched more, this is arbitrary. Try how many stitches you need to put on your shoulders at any time, and try to fit your shoulders smaller than your usual clothes. The sleeve armpit is folded into a triangle at the flat needle, and the collar socket is woven back and forth, and the collar socket before and after weaving is woven separately from the left shoulder and the right shoulder.
After the number of stitches in the back collar socket of one shoulder, stop and weave the other shoulder with another thread, and wait for the back collar socket on this shoulder to be closed, and then close the remaining stitches on both sides of the front collar together. The left and right shoulders are knitted together, and at the same time, the left and right shoulders are added to the needle, and the front collar socket is picked up back and forth, and the rear collar socket is added to form the rear collar socket. Knit the left and right shoulders in front and back, and add needles.
The front and rear collar sockets are formed by adding needles to form the collar sockets, so that the knitting of the collar sockets behind the sweater is completed.
History of Chinese Costumes:
The history of Chinese clothing has a long history, which can be traced back to primitive societies. Regarding the invention of clothing (before the 21st century BC), the "Lü Shi Chunqiu", "Shiben" and "Huainanzi" written during the (Warring States period) mention that the Yellow Emperor, Hu Cao or Boyu created clothes. If we investigate from the aspect of unearthed cultural relics, the source of the history of clothing can be traced back to the late Paleolithic period of primitive society.
In the Paleolithic Age, gathering, fishing and hunting were the source of food and clothing for people.
In 1933, in the cave man site on the top of Zhoukoudian Mountain in Beijing, 1 bone needle and 141 pieces of drilled stone, bone, shell and tooth ornaments were found. The bone needle is about 82 mm long, polished throughout, with narrow pinholes and sharp tips, confirming that Zen was able to sew simple clothes from natural materials such as animal skins. Luo Qi of the Ming Dynasty "The Eleventh of the Originals of the Clothes" has:
There is a record of "Nest Clothing", saying that the Chao clan was the first to teach civil animal fur to make clothes. The history of Chinese costume culture can be regarded as the beginning of this.
-
2. The second method of receiving needles: I will give it a name: it is called the flat collection method. Now I'm going to talk about the second method of needle receiving.
The picture above is the method of flat collection, closing once in a row (that is, the right front of the needle, the left side of the reverse needle), each side of the 10 needles.
That is: first close 4 stitches on the right front, and then close 4 stitches on the left back, symmetrical on both sides.
Then go back to the front, first close 3 stitches on the right front, then close 3 stitches on the left back, then return to the front, first close 2 stitches on the right front, then close 2 stitches on the left back, and then return to the front, first close 1 stitch on the right front, and then close 1 stitch on the left back, end.
In general, it is also written in the diagram: 1-4-1 2-3-1 2-2-1 2-1-1, and the three numbers represent the number of needles in the row.
The cuffs in the picture above are the same, flat closed
The following picture is also the method of cuff stitching: cuff stitching, 13 stitches are removed on one side, because it is a vest, so the number of stitches should be collected.
Written as an international standard, it is: 1-4-1 2-3-1 2-2-2 2-1-2, the number of needles, the text description is: 1 line receives 4 needles, and 1 time (because the first time the needle is closed, it is only the first line).
2 rows receive 3 stitches, 1 time.
2 rows receive 2 stitches, 2 times.
2 rows receive 1 stitch, 2 times.
13 stitches on each side for a total of 26 stitches on both sides.
Flat'Diagram of the method (also known as the hedging method).
Generally, the cuff has such a few stitches:
If you want to collect 10 stitches on each side, then collect it
If you want to collect 11 stitches on each side, then collect it
If you want to collect 12 stitches on each side, then collect it
If you want to collect 13 stitches on each side, then collect it
If you want to collect 14 stitches on each side, then collect it
If you want to collect 15 stitches on each side, then collect it
Look at the picture below is the classic princess dress cuff pin-closing mark is
The neckline needle collection method and the sleeve mountain needle collection method are the same as the above, but the numbers are different, the neckline is the right side of the reverse needle, the left front of the needle, the following picture is the left and right marks of the neckline.
Have you learned?
-
Materials required: wool, rod needle.
1. First of all, after knitting the sweater to the height of the armpits, it is time to divide the front and back pieces of knitting.
2. Then, the number of stitches in the front and back pieces is the same. The front film is divided into two parts, and the back film is one part. Next, start weaving and then slicing.
When the back begins to knit, 1 needle is collected when the left and right armpits are knitted to the front, and then the needle is knitted on the reverse side, and the front is knitted to the front and then the armpits on both sides are closed with a needle, and the left and right armpits are closed with a total of 2 needles, as shown in the figure below.
3. Knit the needle on the front without adding or subtracting, and knit the needle on the back. Knit to the back collar. Leave 6 stitches on each shoulder, and thread the back collar coil with the thread for later use, as shown in the figure below.
4. Next, start weaving the front piece, put the two pieces of fabric on the same rod needle to knit, and prepare a ball of thread to weave, as shown in the figure below.
5. Also knit to the front of the two plackets to receive a needle on the front, then knit the needle on the reverse side, and knit it again to the front placket to close the needle, as shown in the figure below.
6. Receive 6 stitches on the shoulder of the rod needle, which is the same as the number of stitches in the back piece, as shown in the figure below.
7. Then suture on the reverse side; After stitching, turn it over to the front, as shown in the picture below.
8. Next, knit the edge of the front auspicious placket, pick up the edge and weave the upper and lower needles, wear the loop behind the collar, start to knit the edges, and weave to the required width and then collect the needle, as shown in the figure below.
9. Then pick up the sleeve and knit the needle, and collect the needle appropriately under the armpit to weave the appropriate size of the sleeve, as shown in the figure below.
10. Then knit the upper and lower needles and weave the edges of the sleeves, as shown in the figure below.
Usually see other people knit the slanted shoulder feels pretty good, when it is their turn to weave how not to look tight, weaving dismantling, dismantling the weaving, busy for a long time finally figured out, in fact, it is very simple to weave the first 6 needles and the last 6 needles of the needle place to weave a more back and forth. But sometimes you have to be busy for half a day to react. I sent it to tell my sisters who want to knit slanted shoulders like me to avoid detours, and my slanted shoulders of this cardigan are 3 stitches every 2 rows or so. >>>More
The sweater was changed to a collar, and it was good to disassemble and re-knit.
1.72 stitches from the collar (depending on the thread and the size of the collar of the sweater to be knitted). >>>More
The specific weaving method is as follows:
1. The beginning of 146 knitting back and forth flat needles 5 6 rows, then knitting 16 needles flat needles, weaving single rib 114 needles in the middle, and 16 needles at the end to knit sweaters. >>>More
Because everyone's knitting gestures are different, the best way is that you first knit an inch or so of the collar pattern, straighten it a little and measure how many stitches there are in an inch, and then measure how many inches the child's head circumference is, and calculate the number of stitches.