Is a ground floor house suitable for underfloor heating?

Of course it fits, and the effect of installing underfloor heating on the first floor is very good. Because the ground heating pipe on the first floor makes up for the defect of large heat dissipation area, the heat distribution is uniform and the heat is utilized. On other floors, only the external wall has serious heat dissipation, and the temperature of the inner wall and the upper and lower floors can be shared.

And put it under the window, because the radiator hot air rises to block the window cold air, and the shopping mall heater presses the door is also this principle.

Of course it is suitable, we have to find the floor level before doing underfloor heating. Floor heating can only be done after the floor is completed. There is also a job before the computer, which is to lay a layer of insulation board.

It's about two of an eight. Such. The heat of the computer will not.

Go down. Instead, go to the top.

The house on the first floor is also very suitable for floor heating, because the yard on the first floor itself is very good, and his date is going up, so it is also very good to do floor heating on the first floor.

The house on the first floor is of course suitable for underfloor heating. But in the case of the first floor in general, if we are now in the case of post-decoration, he will be higher, so the door frame is higher and replaced.

May not be a good fit. This is because some of the heat from underfloor heating is dissipated to the earth. If there was a basement, it might be a little better.

Underfloor heating can also evaporate water when the weather is wet.

Is the first floor of the building suitable for underfloor heating?

Is the first floor of the building suitable for underfloor heating?

Are you in the south, you can pretend if you want.

There are funds, the installation must be excellent, most of the first floor is relatively cold and damp, the floor heating is the use of bottom-up heating, uniform heat dissipation, stable system, will not appear hot and cold. In terms of the feeling of use, it is very comfortable. But there are some troubles in terms of repair and maintenance.

If you want to install it, you need to find a professional and regular floor heating company to install it, and after-sales service.

Winter is cold, you need to install a heater, if you live on the first floor, it is better to use radiators for heating equipment. Here's why:

The ground floor is the lowest floor of the floor, and the floor is in direct contact with the natural ground. When many families are decorating, the waterproof and seepage-proof decoration of the ground is lacking.

In many places in the south, when it gets wet, a lot of moisture seeps out of the ground. When it comes to seepage prevention, it is difficult to be 100% sure that there will be no impact on pipes and wiring under the floor. The dark pipe under the ground on the first floor has been dark for a long time, and it is easy to be affected by moisture, resulting in a short circuit in the line.

Underfloor wiring is very difficult to handle once it is short-circuited. The humidity of the wall will be slightly lower than that of the floor, and the wall will dry faster in the case of dehumidification. In this way, the radiators installed on the wall are not as easy to be damaged as the floor heating installed on the floor.

The radiator installed on the wall in the maintenance is also lower than the maintenance project of floor heating, and the cost is also lower.

Therefore, when we live on the first floor, if we want to install heating equipment, we must consider the humidity of the environment in which we are located. If there is an overhead layer below the first floor, it may be relatively small to install underfloor heating or radiators, if there is no overhead layer, it is recommended to use radiators.

If you take into account the family, the elderly and children, etc., you must install floor heating, then we must ask a professional decoration company to do a good job of preventing seepage and moisture in the installation of pipes under the floor before decoration, and the pipes and lines themselves must also choose pipes and lines that can be moisture-proof and leak-proof. To ensure the safety of the device and the safety of the family.

In the cold winter, we all hope to have heating equipment, which can give the family a warm home, especially in the case of no collective heating in the south, the damp and cold winter is very difficult for many elderly people, so many families consider installing heating equipment, and the actual situation of the heating equipment is considered, rather than being installed in the clouds.

Nuanfeng, one of the top ten brands of floor heating, pointed out: In fact, these two systems do not exist in which is good and who is bad, but it is suitable for your house, and what is suitable is the best! Experts will analyze the difference between floor heating and radiators in detail from several important indicators such as installation effect, heating effect, thermal efficiency and energy-saving effect.

Comparison of underfloor heating and radiators: installation effect.

Floor heating is a concealed system, the electric heating film is buried in the ground, does not affect the wall decoration and furniture placement, is not restricted by whether the wall can fix the bracket, this advantage is especially obvious in the space surrounded by floor-to-ceiling glass. Because the floor heating is a heating system buried in the ground, it will increase the net height of the room, under normal circumstances, the wet floor heating should be increased by 8cm, the dry floor heating should be increased by 4cm, and the electric heating film is occupied.

Radiator heating is to install the radiator under the exterior window (if restricted, it is installed on the interior wall), generally using the surface installation, the pipe is laid under the ground. At present, radiators are generally made of steel plates, aluminum alloys and copper-aluminum composite radiators, and steel pipes and PEX pipes are used for pipes. The installation of this mode occupies the horizontal space of the room, affects the placement of furniture, and the installation of radiator is restricted by whether the wall can fix the bracket.

Comparison of underfloor heating and radiators II: heating effect.

The heat dissipation method of electric heating film floor heating is mainly based on far-infrared radiation heating, and the heat is evenly radiated from the bottom to the top, which is in line with ergonomics, and the temperature of the room at the same level is uniform, and the temperature difference is small, which makes people feel that they are hot and cold, which is both energy-saving and comfortable.

Radiator heating is a convection-based heating method. The radiator first heats the air around it, so that the air forms a convection flow in the room to achieve the purpose of heating. This heating mode is that the temperature around the radiator is high, with the increase of the distance with the radiator, the temperature decreases, and the temperature difference of the same layer is larger, and this phenomenon is especially obvious in the large space room.

Due to this heating convection mode, the hot air is convection from top to bottom, and the room temperature is hot at the top and cool at the bottom, giving people the feeling that the head is hot and the feet are cold, and the comfort is relatively poor, but it is better than the air conditioning heating.

Comparison of floor heating and radiators: energy-saving effect.

Floor heating is low temperature radiant heating, the required power consumption is low, and the floor heating has the function of temperature regulation, temperature control, for the independent heating system or the system of sub-household metering, the energy-saving effect is obvious.

The radiator belongs to the air convection heat dissipation, the required water supply temperature is higher, and most of the heating is not the temperature control device, even if there is a temperature control system, the energy saving effect is still not obvious, and the floor heating is 30% more energy-saving than the radiator.

In terms of comfort, of course, floor heating is good, and the subject mentioned that on the first floor, the advantage of the first floor is that the installation of floor heating has little impact on the floor height.

However, in the actual installation process, it is necessary to combine the specific housing situation.

Underfloor heating installation needs to be timed. It is suitable for the renovation of new houses and the renovation of old houses. Because the installation of underfloor heating requires burying pipes into the ground and making major changes to the house, it is generally installed when the new house is renovated or the old house is renovated.

The radiator can be installed at any time and does not require major changes to the house. Of course, there are also houses that use floor heating + radiators. Before installation, you can consult your local dealer, and they will come to measure and draw out the design.

Generally, the installation of floor heating is on average at 150 250 square meters, and the installation of radiators is simple and the cost is less.

Whether it is a radiator or floor heating, it affects the final use experience, in addition to the design and installation, it is the heat source wall-hung boiler. The ** of the wall-hung boiler is generally 80 million, and the power is different;

If you are thinking of installing underfloor heating, you can choose the Walloff condensing series wall-hung boiler as a heating heat source. If you are considering installing radiators, you can choose the wall-hung boiler of the traditional series of Woloff as a heating heat source. After my investigation, the wall-hung boiler of Voroff is relatively energy-saving and has a low maintenance rate.

1. Floor heating and radiators, compare the initial cost of heating:

The initial installation cost of radiator heating is about 20,000 yuan, and the gas consumption cost is about 1,200 yuan per month.

The initial installation cost of floor heating is about 10,000 yuan, and the gas consumption cost is about 1,300 yuan per month.

2. The floor heating system is a hidden project, which requires the use of various leveling means, and needs to occupy the height of 6-8cm of the house, which has a small impact on the spacious house, but may cause a certain depression to some houses with low floor height.

Radiators do not occupy the height of the house, but they require a certain amount of space for them.

3. The installation of floor heating is carried out before or together with the decoration of the new house, and it will be more troublesome to install floor heating in the renovated house.

The installation of radiators does not have so many restrictions, and the installation of radiators is much less troublesome than the installation of floor heating, which requires prying open the entire floor.

Although winter has passed, it has now entered the Spring Festival period. But since many people have been asking before, which heating method is better? Now I'm going to summarize which one is better.

There are generally air conditioners, floor heating and radiators to keep warm, but which one is cheaper and safer?

1. Radiators.

The advantage of radiators is that they can heat up as soon as they are turned on, and sometimes they need to drain some cold water, but not much. The radiator is more comfortable to use and will not be very dry.

Radiator radiator heats up as soon as it is turned on, sometimes you need to drain some cold water, but not much. The overall comfort is good, not too dry.

If you want to install, you can plan it before you renovate. Under normal circumstances, a house of 100 yuan costs about 20,000 yuan.

The radiator is also hot water, it has to reach more than 60 degrees to evenly dissipate heat, it needs to consume more gas, take 100 room temperature to reach 20 degrees, generally 15m of gas, a month to have more than 1100 yuan.

2. Floor heating. Floor heating is mainly laid under the floor or under the tile, relatively speaking, the heat dissipation of floor heating is relatively uniform. However, one thing to note is that before the renovation of your new house, you should be prepared to lay floor heating, and do not think about this matter after the decoration is completed. Floor heating ranges from 10,000 to tens of thousands, depending on the type of floor heating, generally 100 floor heating ** in about 25,000.

Compared with radiators, underfloor heating only needs to reach 45°C to heat the room. The conversion efficiency of floor heating is relatively high, and the gas cost is also less. Heating a 10-square-meter room by 20° is less than 1,000 yuan a month.

3. Air conditioning. In fact, the air conditioner also has the effect of providing heating, as long as the heater is turned on, and it will come immediately. In a month, it may cost six to seven hundred yuan. However, it has the advantage that it can be installed and replaced at any time. The bad thing is that it will make you feel dry.

To sum up, it may be that the cost performance of floor heating will be better than the other two, and the comfort is also better, and friends who do not have decoration can consider it. But if your home needs floor heating for less than a month in a year's weather, it may be good to install an air conditioner, and the hot and cold effect will come.

Is underfloor heating or radiators better?

Nowadays, radiators are rarely used, and because of the problem of power consumption, electric heating film floor heating is used.

Many consumers who have not used electric film underfloor heating subjectively believe that electric film systems are very wasteful of energy. In fact, compared with traditional heating, electric film floor heating systems do not consume as much electricity. The so-called "electric heating film electric floor heating system consumes a lot of energy", which is largely related to the building insulation structure.

When the electric heating film is heated to the required temperature, the system is in full load working state, and the required temperature is slightly different according to the different ground materials, and it is usually directly laid under the composite floor to heat up quickly, reaching 18 about 20 minutes. It is recommended that it is best not to turn on and off the power of the thermostat frequently during the season, and it is more energy-saving to let the thermostat automatically adjust the temperature.

Our electric heating film floor heating design is based on about 100 square meters, 8 hours a day, according to the actual use of the square number of the house, the electricity consumption of a day is about one kilowatt-hour.

In fact, in the actual use process, it will be more energy-saving than this, as long as it meets the energy-saving building standards stipulated by the state, the indoor insulation effect will be better, and the electricity consumption will be greatly reduced. Secondly, in the process of use, it can also achieve energy saving, such as going out for more than three days, the electric floor heating system can be kept in a low temperature operating state, and the room can not be kept in a low temperature operating state, and the consumption of electricity will be greatly reduced.

The new steel radiator** range is between 45 yuan and 150 yuan.

The new steel radiator is generally installed by the construction unit, and the manufacturer does not include the installation cost of the radiator; Household radiator installation, some provided by the manufacturer, can also be installed by themselves, installation ** in Beijing per group of 120-230 yuan group.

The installation must be carried out by a professional radiator installer.

The new steel radiator also includes the installation of labor costs, in recent years, the labor costs of radiator installation have risen again and again, such as the company's ** aluminum-plastic pipe installation:

150 yuan group (6 valves, 2 joints, less than 2 meters of aluminum-plastic pipe); $180 group, including:

2 1-inch valves, 2 joints, and aluminum-plastic pipes within 2 meters, and the excess part is practical and practical. During the installation period, if the installation cannot be installed or not installed due to customer reasons, an empty run fee of 50 yuan will be charged; If the installer has renovated the heating pipe and installed the valve, and does not purchase it due to the customer's personal reasons, 80 yuan will be deducted for each group of radiators.