Is a house in the countryside suitable for underfloor heating?

It depends on what kind of house your house is, if it is a building built by yourself or an ordinary house, there is no need to install floor heating, because there are not many floor heating yourself, and your own family may be more time-consuming and laborious, and more importantly, it is not cost-effective.

The best thing is to choose some more traditional heating or choose air conditioning in some places where you can, which is a more economical way, so it is not recommended to install floor heating in rural areas.

It depends on what kind of house it is, if it is just an ordinary bungalow, it is best not to install it, because it is difficult for ordinary household heating stoves to have such a high pressure, and the sealing of the house is too poor, to ensure the heating effect of floor heating.

Hello, it is not suitable for installing underfloor heating. Because in rural areas, floor heating needs to boil hot water by itself, and there is no unified floor heating hot water in it. Now, for the sake of environmental protection, coal cannot be burned in rural areas, and hot water cannot be effectively provided at this time.

Houses in the countryside are suitable for installing underfloor heating. If the conditions are sufficient. If there is a gas pipeline. Install a wall-hung boiler. Install underfloor heating and there is no problem with heating. However, there are very few households in rural areas that install underfloor heating.

Generally, the area of rural houses is relatively large, and the houses are still not connected together, so the heating effect is not too good, and it is not better than the high-rise buildings in the city to have booster pumps to pressurize, so the rural houses are generally suitable for installing floor heating

Rural houses depend on the city, and some are more suitable for installing floor heating, because most rural areas are relatively cold, and installing floor heating is also for the purpose of making the home warmer.

It is best to install air conditioning in rural houses, which can be used in winter and summer, if you want to install floor heating, as long as there is a gas pipeline, you can install floor heating, and use a wall-hung stove for heating.

If the base is raised, it is very suitable for installing underfloor heating. Because it will make life more comfortable for the family.

Yes, because it's really cold in winter, and if you guys don't turn on the air conditioning, it's really super cold.

Yes! My house is a house that I built.

You are **, the south does not install floor heating, install air conditioning.

Coal-fired boilers are the best for rural floor heating.

Coal-fired boilers mainly obtain heat energy by burning coal, and then transfer the heat energy to the heating water, and then send it to the floor heating cycle through the water pump to dissipate heat, and then return to the inside of the boiler to absorb heat, and repeat the cycle until the temperature in the skin reaches the end.

Its advantages are that the purchase cost is relatively cheap, the technical content is not high, the structure is simple, so the stability is good; The use of coal is easy to buy, the cost of use is not high, especially suitable for coal production areas; Other types of fuels can also be used, such as steel carbon, anthracite or wood. It can be said that the use of coal-fired boilers as a heat source is currently the most economical in rural areas.

Other underfloor heating methods:

Electric boiler floor heating: The electric boiler can be wall-mounted like a water heater, or it can be like the front boiler on the ground, because it uses alternating current, through the internal heating parts, the electrical energy is converted into heat energy, and then the heat energy is transferred to the heating water, and the heating water is circulated into the floor heating through the circulating pump until the indoor heating temperature reaches the requirements.

Natural gas floor heating: The use of natural gas as a heat source is a gas boiler, which is to obtain heat energy by burning natural gas, and then transfer it to the heating water, which circulates in the floor heating through a circulating pump. It is a relatively mature heating boiler, and its combustion heat efficiency can reach up to 109%, which is the most used equipment at present.

Underfloor heating can be installed. Insulation materials, concrete, water separators, water pipes, thermostats, floor tiles or floors are required, etc.

1. Before the installation of rural floor heating, the ground should be leveled, and several ways of floor heating have been developed, water floor heating is mainly based on hot water for heating, so that it is better to make greater use of heat, boundary expansion zone and reflective aluminum foil layer floor heating is a new heating method that has not been around for a long time, and can continue to dissipate heat for a longer time.

2. Fill with special bean stone concrete, connect the water separator, in the country it is still in the north, water floor heating and electric floor heating, if the ground is uneven, the insulation of floor heating will be discounted. This is to prevent the heat of the water pipe from wasting and dissipating too quickly, and the pipe should pass through the door crack and lay the coil, which can be more sharp.

3. After the water separator is installed, connect the main pipe, lay the buried pipe and set the expansion joint of the door, so that the heat can be dissipated under the ground. Leveling the floor is an important prerequisite for underfloor heating installation.

4. Intermediate acceptance and construction of bean stone concrete filling layer. This is the last step of paving materials, just install floor heating in your own house, you can carry out the final acceptance and the last step of the installation, and there must be certain rules for the laying of coils.

5. Lay the coil in the room, the last completion acceptance and install the thermostat. They are water floor heating, laying insulation layer, and the distance between coils should be within a certain range, mainly to see whether there will be water leakage.

6. For the first acceptance, whether the connection between the pipes is normal, this problem should be solved at this time, and the installation of the water separator will fill the whole room with water pipes. This allows the temperature to be evenly distributed over the floor and connect the main pipes.

In fact, it is not particularly common to install floor heating in rural areas, and people do not use this thing particularly frequently, so it is a very common way to move floor heating to the ondol, because it can play a dual-purpose heating effectPeople still spend most of their time on the kang, unlike people in the city who have sofas and then sit on the ground before they need to install themUnderfloor heatingto ensure a better heating space.

Rural laying floor heating, before the installation of the ground leveling, and then do the insulation layer, must do a good job of the ground insulation layer, with high-quality insulation materials, otherwise it will lose heat, the concrete layer should be thin, in order to cover the floor heating pipe is appropriate.

Floor heating can be installed in the flat house, our home is rural, the new house built this year is floor heating, the floor heating is very warm, just be careful not to damage him, because it is really not easy to repair.

Rural bungalows cannot be installed with underfloor heating, underfloor heating requires some safety measures, and rural bungalows do not meet such conditions, for the sake of safety, rural bungalows still do not install underfloor heating.

Floor heating or radiators for self-built houses in rural areas.

Rural self-built houses are generally not heated, so what about the floor heating or radiators in rural self-built houses to warm up old friends?

1. Radiators.

The advantage of radiators is that they can heat up as soon as they are turned on, and sometimes they need to drain some cold water, but not much. The radiator is more comfortable to use and will not be very dry.

Radiator radiator heats up as soon as it is turned on, sometimes you need to drain some cold water, but not much. The overall comfort is good, and it won't be too dry.

If you want to install, you can plan it before you renovate. Under normal circumstances, a house of 100 yuan costs about 20,000 yuan.

2. Floor heating. Floor heating is mainly laid under the floor or under the tile, relatively speaking, the heat dissipation of floor heating is relatively uniform. However, one thing to note is that before the renovation of your new house, you should be prepared to lay floor heating, and do not think about this matter after the decoration is completed.

Floor heating ranges from 10,000 to tens of thousands, depending on the type of floor heating, generally 100 floor heating ** in about 25,000.