What should be paid attention to in the breeding method of tiger piran

Breeding methods of tiger piran: First, in the breeding process of tiger piran, there should be appropriate light. Tiger Piran is very fond of sunlight and can grow healthily and well under well-lit conditions, but it can no longer be directly exposed to the scorching sun in midsummer, and can receive more sunlight in other seasons.

If there is a lack of sunlight, or the light is too dark, after a long time, the leaves of the tiger pill orchid will be dark and lack vitality. Second, when breeding tiger pill orchid, we should pay attention to the temperature of tiger pill orchid, it is best to keep it at 20-30, which can maintain the growth vitality of tiger pill orchid, and we must ensure that the temperature cannot be lower than 10 during wintering, otherwise tiger pill orchid may die. Third, watering, water is an indispensable element for the growth of flowers, but in the process of tiger orchid breeding, watering must be appropriate, because the tiger tail orchid is a more drought-tolerant plant, so the frequency of watering can be greatly reduced, to avoid waterlogging, once the water is excessive, the tiger tail orchid may appear rotten roots or even die, especially in winter to prohibit watering, to maintain the cold resistance of the tiger orchid.

Fourth, because the soil requirements for the tiger pill orchid are not strict, so most of the soil can be adapted to growth, however, it is best to use sandy loam soil with good drainage, which is more conducive to the growth of the tiger pill orchid. Fifth, for fertilizers and pesticides, can be used according to the actual situation, under normal circumstances, without the use of fertilizers, tiger pill orchid can also grow, if the nitrogen, phosphorus and potassium compound fertilizer is applied once a month, you can ensure that tiger pill orchid makes it more healthy growth. Things to pay attention to when breeding tiger piran:

Tiger Piran is more sensitive to water, so it must be watered in an appropriate amount, the frequency should not be too high, and the principle of preferring dry to wet must be watered after the soil is dry. When breeding tiger piran for two to three years, remember to change the soil, knock out the whole plant in early spring, remove the old soil, replace the nutrient soil mixed with coarse sand and humus, and combine the pot to carry out branch propagation at the same time, carefully remove the old soil around the stem-like root, expose the thick rhizome, connect the appropriate parts, and cut off the pot separately with a knife.

Do many people say that tiger pills are born annually? It hangs in winter, because it is particularly intolerant, and it will stop growing below 13 degrees, and below eight degrees, it will slowly rot from the base of the leaves, causing the plant to die. If you leave it in a dark place for a long time, it will tend to fade in color.

The last point is watering, especially afraid of waterlogging.

The breeding method of tiger piran: 1. Choose soil with good air permeability, strong drainage and fertile soil; 2. Less water is better than more, and dry is better than wet; 3. Do a good job of shading measures in summer, and normal light in other seasons is good; 4. There is no need to change the pot frequently, and it can be changed every two years. Notes:

1. In winter, it is best to move the tiger piran to indoor breeding; 2. Direct and scorching light will burn Tiger Piran; 3. Regularly prune fallen branches and leaves, overly luxuriant branches and leaves.

First, the breeding method1. Soil: The soil of potted plants should generally choose soil with good air permeability, strong drainage and fertile soil. Therefore, when cultivating tiger piran, we can use perlite, peat, humus, and sandy soil to mix soil in a ratio of 2:4:3:2 to breed.

2. Moisture: Sufficient water is conducive to the growth of tiger pill orchid, but too much water will cause tiger pill orchid to rot roots and lose leaves, so watering we generally follow the principle of rather less than more, rather dry than wet.

3. Light: Sufficient sunlight is conducive to the growth of tiger piran, so in addition to the summer shading measures, other seasons as long as the normal light is good. One thing to keep in mind is that too shady conditions can slow the growth of tiger pills or thin foliage.

4. Repotting: Tiger Piran's requirements for soil fertility are not high, so we don't need to change pots frequently, and it is okay to change pots once every two years, but one thing to remember is that when changing pots, you need to choose potted plants with good drainage, so as not to cause root rot caused by soil waterlogging.

2. Precautions1. Temperature: Temperatures below five degrees Celsius are not conducive to the growth of tiger pills, and even lead to the death of tiger pills, so it is best for us to move tiger pills to indoor breeding in winter.

2. Light: Direct and scorching light can burn tiger pill orchid and even cause tiger pill orchid to get sick. So in the summer, we need to do shading measures. In addition, too hot and humid conditions can also cause tiger pills to become sick, so it is important to preserve air circulation.

3. Pruning: In order to make the tiger piran grow better, we need to regularly prune the fallen branches and leaves, overly luxuriant branches and leaves, and new flower buds, which can promote the germination of the young shoots underneath and adjust the overall shape.

1. Soil: Breeding Tiger Piran should use pastoral soil, Jikang ash, and cinder to prepare soil. 2. Watering:

Watering every 3-5 days in summer and once a week in spring and autumn. 3. Fertilization: add organic fertilizer during planting, and apply nitrogen fertilizer during the growth period.

4. Illumination: Provide scattered light for Tiger Piran. 5. Precautions:

In winter, it should be moved to indoor farming.

1. Breeding soil

The breeding soil of tiger piran is mainly humus, which is made of pastoral soil, Jikang ash, cinder and other materials. It is cultivated in mud pots in the north and in sand pots in the south. After disinfection and sterilization of the soil at high temperature, ensure that the soil is loose and breathable, and it can be used for cultivation.

2. Watering and irrigation

The tiger piranium needs to be applied with water to make the whole plant delicate and green. However, the tiger pill orchid can not be watered frequently, it is enough to irrigate once every 3 5 days in summer, and once a week in spring and autumn. In winter, it is necessary to ensure that the soil is dry and wet, and the surface of the soil is whitish before watering.

3. Fertilizer application

When mixing soil, a small amount of organic fertilizer and decomposing fertilizer can be added to the soil quality of tiger pill orchid as base fertilizer to improve the nutrient concentration in the soil. In the later stage of growth, nitrogen fertilizer is used to promote the growth of tiger pill orchid leaves more fat and green.

4. Light and ventilation

The tiger pill orchid is very adaptable to light, and the whole plant is more ornamental, the leaves are thick and full, and the leaf color becomes more distinct. In summer, you can put the tiger pill orchid in a ventilated environment to block out the strong direct light.

5. Precautions:

Tiger Piran has poor cold tolerance, so it needs to be moved indoors in winter, and the room temperature is stable above 10 to avoid frost damage. Breeding 1 3 years to change the soil and repot once to ensure that the soil is healthy and loose, which can be suitable for the growth rhythm of tiger piran.

There are four aspects of cultivation methods and precautions for tiger piran, including soil and potting, watering, fertilization, temperature and light.

1. Soil and potting.

Tiger pills prefer loose, well-drained, aerated soils rich in organic matter. Choose nutrient-rich soils such as peat soil and perlite mixed with humus. At the same time, choose a basin with good air permeability to prevent water accumulation in the roots. Filial piety.

2. Watering:Tiger wax such as Piran is drought tolerant, but it also needs to maintain a certain humidity. In general, it is enough to ensure that the soil is moist every time you water. When the weather is hot in summer, you should water more to maintain humidity; In winter, the frequency of watering should be reduced appropriately to avoid rotting.

3. Fertilization. Tiger pill orchid does not have a high demand for fertilizer, and it is enough to apply a full fertilizer about 1 time a month.

4. Temperature and light.

Tiger Piran prefers a warm, airy, and well-lit environment. The indoor temperature should not be too low, the best is 15 28. At the same time, it is necessary to ensure enough sunlight, but too strong sunlight can also cause damage to it.

Types of Tiger Piran:

1. Narrow-leaved tiger piran.

The leaves are long, narrow, with dark green markings, and are very beautiful.

2. Mosaic tiger piran.

It is a special kind of tiger orchid, and its leaves will produce a small flower, the flower color is white or light yellow, playful and cute.

3. Lanceophylla tiger piran.

The leaves are lanceolate, and the wheel is very beautiful with clear stripes.

4. Bead Tiger Piran.

Also known as jewel tiger pill orchid, its leaves have many small dots, which look like small beads, so it is called bead tiger pill orchid.

5. Spotted leaf tiger piran.

The leaves have large and small white spots and are very beautiful.

6. White-edged tiger Piran.

Its leaves are dark green with white edges, creating a strong contrast and is very aesthetically pleasing.

1. Soil

The most important thing about the soil is that it has a good drainage capacity, and it is even better if it can be loose and fertile. So we can put peat, humus, sand, and perlite in 4:3:

Mix it in a ratio of 2:2 to raise it, or you can follow the garden soil:humus soil:

Sandy soil = 5:2:3 method to configure its soil.

2. Moisture

Tiger Piran belongs to the type that is afraid of waterlogging and not afraid of drought, so we should do more watering than less, and rather dry than wet. Except in the spring, when it grows new leaves, it is better to keep the potting soil moist.

3. Illumination

Although the tiger pill orchid has some shade tolerance, it grows better in full sunlight. It's best to put it under the sun and get direct sunlight without worrying about getting sunburned.

Fourth, temperature

Tiger pirans prefer to grow in conditions of 20-30. At the end of the year, when it cools down, move it to the house and adjust the temperature to 5 or more. In the summer, it is necessary to take measures to cool down and keep the temperature below 30.

Precautions for tiger piran breeding:

1. During the dormant period in winter, watering should be controlled and the soil should be kept dry. Cultivate in decorative pots with poor drainage, avoid stagnant water, so as not to cause root rot and cause the leaves to fall down.

2. Generally, the tiger pill orchid is repotted once every two years, and the repotting should be carried out in spring, and standard compost can be used when changing the pot.

3. Pruning, mainly to cut off the old leaves and overly lush places, although this can not inhibit its growth, but after pruning can ensure that it has more sunlight and growth space.

1. Light. Tiger Piran needs a certain amount of light during the growth process, many friends put Tiger Piran at home, and leave it alone, long-term indoor without light will definitely lead to various problems of Tiger Piran, and long-term darkness will cause the leaves of Tiger Piran to turn yellow.

2. Soil. Although it is said that the green plant of tiger pill orchid is relatively easy to take care of, if the choice of soil is not right at the beginning, it will also affect the normal growth of tiger pill orchid. Tiger Piran is suitable for breeding with sandy soil with good drainage, so flower friends must pay attention when choosing.

3. Temperature. The right temperature also plays a vital role, it survives best in the environment of 20-30, pay attention to maintain an indoor temperature of 10 in winter, so in summer and winter, we should pay attention to protect the tiger piran, try not to put it too much outside, and move it indoors is the best.

4. Watering. For the plant of tiger pill orchid, it must fail when watering, master the principle of rather dry than wet, you can wipe the leaf surface with water, but you must not water too much, generally speaking, you need to water twice a week, and in winter because of climate factors, you only need to water once. <>

5. Fertilization. How to raise the best tiger pill orchid, fertilizer is also a very important point. Tiger Piran does not have high requirements for fertilizer, only needs to be fertilized twice a month during the growing season, and pay attention to the application of thin fertilizer, so as to ensure lush growth.

The breeding methods and precautions of tiger piran are as follows:

1. Light. Potted saxifrage orchids do not have high requirements for light, as long as there is relatively sufficient light. Saxifria grows well under well-lit conditions, except for midsummer, where direct sunlight should be avoided, and more sunlight should be received in other seasons; If left indoors in a dark place for too long, the leaves will be dark and lack vitality. However, indoor potted plants should not be suddenly moved to the sun, and should be adapted to a dark place first to avoid burns on the leaves.

If indoor conditions do not allow, it can also be placed close to sunlight.

2. Soil. Saxifria orchid has strong adaptability, does not have strict requirements for soil, can be managed more extensively, prefers loose sandy soil and humus, and is resistant to drought and barrenness. Potted plants can use 3 parts of fertile garden soil, 1 part of cinder, and then add a small amount of soybean cake crumbs or poultry manure as base fertilizer. The growth is robust and does not inhibit its growth even if it is full of pots.

Generally, the pot is changed once every two years, and it is done in the spring.

3. Temperature. The adaptability of Saxivia orchid is strong, the growth temperature is 20-30, and the wintering temperature is 10. In winter, the temperature should not fall below 10 for a long time, otherwise the base of the plant will rot and the whole plant will die.

4. Moisture. Watering should be in moderation, and master the principle of preferring dry to wet. Usually scrub the foliar dust with clean water to keep the leaves clean and shiny. When new plants germinate at the root neck in spring, it is necessary to water more appropriately to keep the potting soil moist; In summer, the potting soil should also be kept moist during the high temperature season; After the end of autumn, the amount of watering should be controlled, and the potting soil should be kept relatively dry to enhance cold resistance.

During the winter dormant period, watering should be controlled, the soil should be kept dry, and watering should be avoided in leaf clusters. When using plastic pots or other decorative flower pots with poor drainage, avoid stagnant water, so as not to cause rot and cause the leaves to fall down.

5. Fertilization. Saxivier does not have high requirements for fertilizer, and only nitrogen fertilizer is applied for a long time, and the markings on the leaves will become dull, so compound fertilizer is generally used. Fertilization should not be excessive. During the peak growth period, fertilizer can be applied 1-2 times a month, and the amount of fertilizer should be small.

Standard compost can be used when repotting, and thin liquid fertilizer can be applied 1-2 times a month during the growing season to ensure that the leaves are green and thick. You can also evenly bury 3 holes of cooked soybeans in the soil next to the pot, 7-10 grains per hole, and be careful not to contact with the roots. Fertilization is stopped from November to March of the following year.