How can molding water be replaced? What is molding water

Molding water can be baked soda.

water or glycerin.

and so on.

However, it is necessary to pay attention to the appropriate degree when blending, and generally the molding water is used to make slimes with a suitable feel.

If you find that the molding water is gone, you can take the nearest material, such as the slime made of laundry detergent is also very good.

Generally, with a little starch or baking soda plus laundry detergent and a little water, just like dough, you can make the right viscosity, generally it is recommended not to use borax instead of molding water, because borax is actually toxic to the human body.

The role of molding water:

Molding water can allow people's intelligence to be stimulated, because the production of molding water is a lazy habit that can prevent oneself from developing between the process of using the brain and hands, so the molding water can be operated by itself in daily life, and can have fun in the process of making, and can also relieve one's depression and depression.

Molding water is a common industrial chemical, which is mainly used in the processing and fabrication of plastic molds. But sometimes we run out of molding water or can't buy it, so what should we do? In fact, we can use the following methods instead of molding water.

We can use lubricating oil instead of molding water. Lubricating oil can reduce the friction between the plastic mold and the plastic material, so that the mold and the material run more smoothly, and can also effectively protect the surface of the mold and the material. When using lubricating oil, it is necessary to pay attention to the control of the amount and the choice of spraying method to ensure the best effect.

We can use paraffin wax instead of molding water. Paraffin wax is a solid substance, which is not volatile and has good lubricating properties. When using paraffin, it needs to be dissolved in an appropriate amount of solvent, stirred evenly before use, and then applied between the mold and the material to play a lubricating role.

We can also use silicone oil instead of molding water. Silicone fluid is a chemical with good adhesion and high temperature resistance, which can effectively reduce the friction during plastic molding, so that the mold and the material can run more smoothly. The amount of silicone oil used needs to be determined according to the specific situation, and generally it is necessary to spray a layer evenly on the surface of the mold.

In addition to the above alternatives, we can also try to use other lubricants or additives instead of molding water. For example, some edible oil, soy sauce, etc. can also be used for some simple plastic mold processing and making. However, it is important to note that these substitutes may not be as effective as molding water and need to be used with special care to avoid damage to health.

In the case that molding water is not available or cannot be purchased, we can use the above methods to replace it. Different alternatives are suitable for different materials and processing methods, so they need to be selected and adapted for specific situations. It is also necessary to pay attention to safety and environmental protection when using substitutes.

Molding water is a handmade toy. The moulding water has a similar feel to foam clay, slimes and light clay, and is very popular with children who like to make it by hand. The main materials used in the production of molding water are:

Salt, laundry detergent (or soap foam), glue, paint, containers and hot water. The specific production steps are as follows:

First, prepare an open glass container and pour a spoonful of table salt into the container. Then, pour a spoonful of laundry detergent (or scraped soap foam) into the container, then pour about 50ml of hot water into it, and stir well with a spoon. Finally, pour an appropriate amount of water and transparent watering into the solution and stir until it is fully integrated.

If you want a brightly colored molding water, you can also add an appropriate amount of pigment and stir it evenly when you reach the glue in the last step.

It should be noted that hot water and glassware will be used in the production process, so it is recommended that children should be accompanied by their parents to avoid accidents.

It is the easiest to make molded water, so water, if you want to make molded water, you must have courage, and what shape of water can be the shape of courage?

The easiest way to do this is to make a model of the water.

Hello answer, I am very happy to be able to answer your questions, after the relevant information inquiry, prepare a piece of ultra-light clay, which is the kind of ultra-light clay that children often play with in their hands. Put it in a container, pour in a small amount of water and start stirring, let the ultra-light clay melt, and then prepare the soap, if you don't have soap, the soap is fine, scrape off the soap block and mix it with the appropriate water, and then mix it with the ultra-light clay, I hope my answer can help you.

The easiest way to test this simple model is to create a simple model using chemistry and physics.

All passengers can make some better treatment of it, otherwise, it should be more difficult, I think this message really uses this mountain song too many choices only that is very good.

8. How to make molding water is the easiest? I don't know, what does that mean?

Molding water can be replaced with baking soda or glycerin.

However, it is necessary to pay attention to the appropriate degree when blending. Generally, molding water is used to make slimes that feel appropriate, if you find that there is no molding water, you can take materials nearby, such as slimes made of laundry detergent is also very good.

Generally, with a little starch or baking soda plus laundry detergent and a little water, just like dough, you can make the right viscosity. In general, it is recommended not to use borax instead of molding water, because borax is actually toxic to the human body.

I think you can use makeup remover instead.

The production of pure raw water is still very simple, if you find an alternative product, that is, you can use some soapy water and dish soap, you can make pure water.