Where is vivo security mode turned off?

01 vivo turns off the safe mode, there are two ways, the first is to restart the phone, press and hold the power button of the phone, click "restart", after restarting, the phone will automatically turn off the safe mode. Second, factory reset, open the phone settings, tap More settings, after entering the more settings page, find and tap "Factory Reset", click to reset all settings, and the phone will be out of safe mode. Note that before doing a factory reset, we must remember to back up the important data in our phone.

Safe mode is a special mode in the Windows operating system, friends who often use the computer will certainly not feel unfamiliar, in the safe mode users can easily fix some errors in the system, to achieve twice the result with half the effort. Safe mode works by booting up the computer without loading third-party device drivers, so that the computer runs in the system's minimum mode, so that users can easily detect and fix errors in the computer system. The safe mode in the mobile phone is a protective measure for the mobile phone, in this mode only the software that comes with the system can be used, and no third-party software can be used, so that the dangerous APP can be uninstalled in the safe mode.

Vivo to turn off Safe Mode:

Method 1: Restart your phone.

1. First, find the power button of your phone and press and hold. Once the page shown in the image below appears, click "Restart".

2. After restarting, the phone will automatically turn off the safe mode.

Method 2: Factory reset.

3. After entering the factory reset page, click "Reset All Settings".

4. If we set the lock screen password, the page shown in the figure below will appear, enter the unlock password.

5. When the window shown in the following figure appears, click "Restore".

6. After that, the phone will turn off the safe mode.

When the phone occasionally pops out of safe mode, just restart the phone and wait for the phone to automatically turn on and it will be back to normal

Ways to restart your phone:

Press and hold the top round button for more than 10 seconds to force restart the phone (applicable to NEX 3 NEX 3S);

Models released after September 2017 (X20 and later), as well as new models that will be released in the future: Press and hold the "Power button" + "Volume Down button" at the same time for more than 10 seconds;

Models released before September 2017 (models prior to X20): Press and hold the "Power button" for more than 12 seconds.

When the phone is in safe mode, you can press and hold the power button to select "Restart", and the phone will automatically turn on and it will return to normal.

Take the vivoz3i phone to cancel the safe mode as an example.

1. Open the vivoz3i phone interface, press and hold the vivoz3i phone power button, and click the restart phone button, as shown in the figure below.

2. After restarting the vivoz3i phone, the safe mode will be removed, as shown in the figure below.

3. You can also back up the important data in your phone and back up the data of your vivoz3i phone to the cloud, as shown in the figure below.

<>6. Click to restore all settings, and the phone will be released from safe mode, as shown in the figure below.

Hello, the specific steps to enter the safe mode are as follows: 1. Turn off the mobile phone first; 2. Press and hold the power button of the mobile phone to turn on; 3. When the logo of the mobile phone brand or operator appears on the interface of the mobile phone, press and hold the volume button of the mobile phone to enter the safe mode of the mobile phone. In safe mode, the lower left corner of the phone interface will display the safe mode; Press and hold the power button of your phone and restart your phone to exit safe mode.

When you jump out of safe mode, you need to force restart:

Press and hold the top round button for more than 10 seconds to force restart the phone (applicable to NEX 3 NEX 3S);

Models released after September 2017 (X20 and later), as well as new models that will be released in the future: Press and hold the "Power button" + "Volume Down button" at the same time for more than 10 seconds;

Models released before September 2017 (models prior to X20): Press and hold the "Power button" for more than 12 seconds.

If the above methods are invalid after operation, you can bring your mobile phone and purchase voucher to the customer service center for testing and processing, customer service center address: enter vivo official website vivo**app--my-service outlets or vivo official website web version--slide bottom--service support--service network query--select provinces and cities to query the customer service center address. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

Find App Management in your phone's settings. Find the vivo service again, click on force turn off the safe mode, and it will quit.

When the phone occasionally pops out of safe mode, you just need to restart the phone and wait for the phone to turn on automatically and it will be back to normal

Ways to restart your phone:

Press and hold the top round button for more than 10 seconds to force restart the phone (applicable to NEX 3 NEX 3S);

Models released after September 2017 (X20 and later), as well as new models that will be released in the future: Press and hold the "Power button" + "Volume Down button" at the same time for more than 10 seconds;

Models released before September 2017 (models prior to X20): Press and hold the "Power button" for more than 12 seconds.

1.Method 1: When our phone enters safe mode, the first way is to restart it, and the phone will return to its original state after restarting.

2.Method 2: If restarting the phone is still in safe mode, we need to restore the operation, first open the settings icon in the interface, and then select more settings options in the settings interface.

<>4.After verifying the password, we will enter the factory reset interface, and then we click on the Restore All Settings option in the interface, and click Restore in the pop-up prompt box.

The above are some of the methods and steps to launch the safe mode in our vivo mobile phone, if we accidentally cause it to turn on the safe mode when using the mobile phone, we need to launch the safe mode to perform other operations, if you don't know how to set it up, try the methods in the above tutorial.

When the phone occasionally pops out of safe mode, you just need to restart the phone and wait for the phone to turn on automatically and it will be back to normal

Ways to restart your phone:

Press and hold the top round button for more than 10 seconds to force restart the phone (applicable to NEX 3 NEX 3S);

Models released after September 2017 (X20 and later), as well as new models that will be released in the future: Press and hold the "Power button" + "Volume Down button" at the same time for more than 10 seconds;

Models released before September 2017 (models prior to X20): Press and hold the "Power button" for more than 12 seconds.