What is the difference between scraping porcelain for home decoration and brushing latex paint?

Updated on home 2024-07-31
16 answers
  1. Anonymous users2024-02-15

    The difference between decoration scraping porcelain and brushing latex paint is in the following aspects.

    The scope of application is different: the color of latex paint can be selected from multiple options, which is suitable for general home decoration. Scraping porcelain is suitable for large-area office and business hall decoration.

    Different materials: latex paint is a water-based paint, which is mainly composed of five components: one is water; the second is emulsion, which is similar to white glue, which plays the role of adhesion and is the core ingredient of latex paint; the third is pigments; fourth, fillers; Fifth, additives, such as anti-foaming agents, antifreeze agents, etc., latex paint is mainly composed of the second and third two components.

    Scraping porcelain is mainly melamine coating, which is easy to be damp and pulverized and fall off for a long time, and can not be mildew and moisture-proof.

    Construction sequence: scraping porcelain is actually to make latex paint base, latex paint can not be brushed directly, must be similar to scraping porcelain treatment, called latex paint special putty, sandpaper sanding and then brush latex paint.

    Color: Latex paints come in different colors. Scraped porcelain is generally a cold white.

    Pollution: Latex paint is water-soluble, and if it is a brand, it can have almost no pollution. The cost of scraping porcelain is low, because there are chemicals such as formaldehyde added to it, there is a certain amount of pollution, and it is difficult to deal with porcelain again after scraping.

    Cleaning: Latex paint can be scrubbed with a towel, if your house is decorated with a higher grade, it is recommended to spray latex paint for better results. After brushing latex paint, you can use a clean rag to scrub the wall surface directly with water for less polluted walls.

    The scraped porcelain surface is easy to get dirty, easy to yellow, and it is not easy to clean, so it cannot be wiped directly with a towel.

  2. Anonymous users2024-02-14

    Scraping porcelain is not strong, and then brushing latex paint on top is easy to peel, and easy to dirty, scraping porcelain is generally scraped porcelain by real estate companies for the house to buy, so scraping porcelain is useless! The second decoration still has to be completely eradicated!

  3. Anonymous users2024-02-13

    Scraped porcelain walls cannot be directly painted with latex paint. The correct process should be to polish first, then clean the base layer, then scrape the putty powder, wait for the putty powder to dry and then polish and clean, and finally spray latex paint, latex paint must be sprayed at least twice, and it can only be carried out after drying.

    Latex paint uses:Polyvinyl acetate emulsion paint, generally used for inner walls; All-acrylic latex paint can be used for interior and exterior walls; Acetic acrylic latex paint and vinyl acetate and acrylic acid vinegar copolymer emulsion as the base material of latex paint, as well as styrene acrylic latex paint** are cheaper than full acrylic latex paint, generally used for exterior walls; These latex paints can also be made into high-build types (e.g. relief paints, real stone paints, etc.).

    Mixed with more filler can be used to treat uneven facades; All acrylic latex paint and styrene acrylic latex paint can be made into anti-rust primer for metal latex by adding anti-rust filler, which can be used as a primer on steel that has undergone degreasing and rusting; Latex paint has excellent adhesion to galvanized steel sheets, and is one of the most suitable coatings for galvanized steel sheets that have not undergone conversion treatment.

    The above content reference: Encyclopedia - latex paint.

  4. Anonymous users2024-02-12

    No.

    The correct process should be to polish first, then clean the base layer, then scrape the putty powder, wait for the putty powder to dry and then polish and clean, and finally spray latex paint, latex paint must be sprayed at least twice, and it can only be carried out after drying.

    Precautions for brushing latex paint.

    1. It is necessary to pay attention to the need to lay a barrier on the ground before brushing latex paint to prevent the floor from getting dirty, or some waste newspapers, plastic sheets and unused clothes.

    2. It should be noted that if there is a place that does not need to be painted with latex paint, a barrier needs to be attached to prevent it from being stained when applying latex paint.

    3. If the latex paint has not been used up and the can has been opened, then it needs to be sealed tightly, in order to avoid its surface crusting and falling into the bottom of the can, it can be stored upside down, so that it will be more convenient to use.

    The above content refers to People's Daily Online-Can the wall be brushed with latex paint and directly pasted with wallpaper?

    Encyclopedia - Latex paint.

  5. Anonymous users2024-02-11

    No, it is easy to fall off, it is best to paint it with a brush after wetting it, shovel it off with a shovel, and then paint it with putty.

  6. Anonymous users2024-02-10

    No, because the previous scraped porcelain is not water-resistant, the direct latex paint will fall off together with the porcelain scraped before, as long as the water is wet, it can come down very well, and the latex paint will be fine. If you have more questions, you can click on ID to consult.

  7. Anonymous users2024-02-09

    Hello, the wall of scraped porcelain needs to be sanded to brush latex paint, otherwise it is easy to peel and fall off, remember!

    The connoisseur [He Guangning] will answer for you. If mine is helpful to you, please be prompt! Your recognition is the biggest motivation for me to answer the questions! Thank you!

  8. Anonymous users2024-02-08

    I am doing decoration, you said that the wall skin is difficult to remove, I analyzed that the wall should be scraped with tempered paint, the nature of this coating is that the adsorption force of the paint and the wall is greater after absorbing moisture in case of moisture, so it is difficult to remove, and there is no problem with rolling brush latex paint.

  9. Anonymous users2024-02-07

    Applying latex paint directly is easy to peel.

  10. Anonymous users2024-02-06

    In the past, the wall of scraped porcelain could be painted with latex paint, and the original putty could be removed to paint the wall with latex paint.

    You only need to keep the wall smooth, and you can directly apply latex paint. The color of the newly brushed latex paint can be set according to your needs, just prepare the roller and brush, and pay attention to uniformity when applying. In addition, the amount of each color should be prepared sufficiently, otherwise there will be color difference when it is not enough.

    When brushing latex paint, a layer of primer should be applied first, and the primer is used as the base surface. If there is no primer, after a long time, the wall will be depowdered, mildew and even discolored.

  11. Anonymous users2024-02-05

    1. How to brush latex paint on the melamine wall.

    1. The melamine paint is a relatively old material, and now it is latex paint, and the gloss, waterproof and other effects are better than the coating, but the requirements for the treatment conditions of the base layer are also relatively high.

    2. After the melamine paint is removed, the base layer needs to be treated like this: cleaning and cleaning, rolling coating interface agent (108 glue or wall solid), stucco plaster leveling, batch putty, grinding, latex paint primer and topcoat.

    2. Precautions.

    Be sure to polish off the melamine paint before you can apply latex paint.

    1. The base layer of imitation magnetic coating will have a hollow drum or the base layer is not firmly bonded after a long time, and then the surface construction will easily cause falling off from small to large areas.

    2. The surface of the magnetic coating is relatively smooth, which is not suitable for the bonding of primer and topcoat.

  12. Anonymous users2024-02-04

    If you don't scrape the putty, the wall will be very rough, and the local will be uneven, and the putty can play a role in leveling.

    Zhengran wall expert 007 Xiaowen will answer for you.

  13. Anonymous users2024-02-03

    It depends on whether your wall has fallen wall ash, if there is wall ash, first roll glue, and then roll latex paint after drying.

  14. Anonymous users2024-02-02

    Peel off the wallskin, apply mud powder, and apply latex paint!

  15. Anonymous users2024-02-01

    No, you can only shovel it, scrape the putty again, and then apply latex paint.

    If you don't shovel off the latex paint, it is easy to fall off when brushed up.

  16. Anonymous users2024-01-31

    When making walls, special attention will be paid to the need for a good effect. ForWhether the wall is scraped porcelain or painted with latexI don't know much about it, but there are actually different advantages, so let's see what the specific differences are.

    The house is renovated, I don't know how to scrape porcelain or paint latex, in fact, scraping porcelain is relatively cheap. However, it is better to use latex paint because it is an alternative to magnetic paint. Imitation magnetic paint is easy to crack, hard and easy to fall off, latex paint has a soft and delicate texture, diverse colors, and does not fall off, so latex paint is better.

    There are now decorations often used in latex paint, or wallpaper wallcovering, which has a highly effective antibacterial effect, interior wall latex paint, water-based environmental protection, mildew-proof, moisture-proof, and now few people use scraped porcelain, generally made of latex paint or wallpaper. Each has its own advantages and disadvantages, though, and it's up to you to choose.

    1. The scope of application is different: the color of latex paint can be purchased in many aspects, and it will be used in many places, while scraping porcelain is suitable for the wall treatment of some buildings, offices and business halls in a large area.

    2. Different materials: latex paint can be melted when exposed to water, and it is a mixture of some substances: there is water; There is emulsion, which is a kind of white glue, which is then mixed with pigments to make some paints, and also has the effect of waterproof and anti-freeze, and scraped porcelain is mainly melamine paint.

    Melamine paint is easy to be wetted by powder, fall off, not easy to mildew, moisture-proof.

    3. The construction is different: scraping porcelain is actually the basis of latex paint, but stripping needs to do a basic treatment, called latex paint special putty, and the paint can only be used after the implementation of rough rent putty.

    4. Wall color Luyu: latex paint has different colors. Scraped porcelain is usually white.

    The above is trueWhether the wall is scraped porcelain or painted with latexIn general, there are many places where latex paint is applied, and the stool section of the market is not very high, which can meet the needs of the public.

    You can get it for free

Related questions
8 answers2024-07-31

Generally, the putty can be brushed with latex paint in three to five days after scraping. But according to the local weather, you can't brush it until he's done anyway. The construction of plastering is generally one plaster, two putty, and two latex paints. >>>More

12 answers2024-07-31

Exterior wall paint is not only colorful, but also its water resistance, pollution resistance and weather resistance are also very good, so now it is more and more liked by the majority of consumers. The construction process mainly includes the following processes: 1. Inspection and recording of the wall substrate; 2. Clean the wall foundation; 3. Deal with wall holes, cracks, etc.; 4. Scrape 1-2 layers of putty on the exterior wall according to the situation; 5. Roller coating alkali-resistant sealing primer; 6. Roller coating varnish; 7. Polishing corners and rough parts; 8. Spraying exterior wall paint; 9. Paste tape into grids at the elastic line part; 10. Elastic wire according to size requirements.

14 answers2024-07-31

There are several cases of rifts1The cracking place is the place where the wall is chiseled, and the cement that is added after it is not dry is easy to crack 2Cracks caused by wall deformation, which mostly occur on the walls of balconies and shades3 >>>More

12 answers2024-07-31

The process of wall treatment for the decoration of new houses: >>>More

14 answers2024-07-31

Paste wallpaper or liquid wallpaper.

Latex paint looks monotonous. >>>More