If you want to install a bookcase in a small bedroom, which is better, whether it is better to buy a

In response to this problem, I believe many people have the same doubts, in terms of the aesthetics of the wardrobe, the carpenter's craftsmanship is generally not as beautiful as the ready-made wardrobe, because if the furniture manufacturer wants to attract the attention of consumers, he must first work the appearance. Most of the finished wardrobes in furniture stores are designed by professional designers and are full of beauty and ornamentality. If you find a carpenter to make a wardrobe, most of the wardrobes are relatively neat and have no features, and the fineness of the wardrobe depends entirely on the craftsmanship of the master.

Whether the wardrobe is good or not is obvious in the later use process. PracticalityIn terms of practicality, a carpenter's job is undoubtedly better. A wardrobe made of carpentry makes the most of the space.

When there is a corner of the house that is difficult to deal with, the carpenter can measure and make a plan on the spot, and the space utilization is high. When comparing cost and quality, we can't compare absolutely, only relatively. Find a carpenter to make a wardrobe, the quality of the wood selected is completely controlled by yourself, and the wood quality level of the finished wardrobe is uneven.

You have good wood and you have to find a good owner. The cost of a good owner is naturally very high, generally speaking, the cost of carpentry to make a wardrobe is lower than that of a finished wardrobe, but if you use good wood and find a good master to do it, the final cost may even exceed the cost of buying a finished wardrobe directly. In addition to the above-mentioned factors, the processing method and production cycle should also be considered.

Woodworking production is mostly carried out on site, pollution and noise will be generated during construction, processing and production time is longer, and the finished wardrobe will be shipped by the manufacturer if it is purchased, and will not cause other problems in the process.

It can also be used directly after being transported home, which is very convenient, time-saving and labor-saving. In addition to carpentry and direct purchase of finished products, you can also choose to customize the wardrobe, that is, choose the wood material and color you want in advance, the manufacturer will have a special designer to communicate with you, according to your ideas and requirements, as well as the layout and space distribution of the house, do floor plans and renderings, after the plan is modified correctly, place an order with the factory for processing and manufacturing. The advantage of this method is that it maximizes the use of space, integrates your needs and ideas, and maximizes practicality and aesthetics.

If you want to install a bedroom bookcase, I recommend buying a carpenter, because it is not easy to rust and is also very good-looking.

Woodworker. Because the woodworking cabinet is more suitable for the size of the bedroom, and it looks exquisite.

I think it's better to choose carpentry, because carpentry is stronger, not easy to rot, and it will look good.

Ready-made ones are better, because buying ready-made styles is very diverse, and **is not particularly expensive, if the carpenter hits** is very expensive.

Decoration let carpentry make cabinets, use solid wood boards, it is recommended to buy solid wood core ecological boards. Now it will be better to have Northeast poplar, because the wood of Northeast poplar is harder, there are pine wood, pine wood is softer, and relatively speaking, the nail power is not so strong. You can take a look at this for yourself when you buy.

If possible, it is recommended that you use all solid wood, because all solid wood is more durable. Secondly, it is recommended that you buy solid wood pellets, which are more cost-effective.

Decoration please carpenter to make cabinets, want to buy solid wood planks, or buy pine wood is better.

Decorate wooden furniture, I think pine furniture is better.

It is best to buy and buy solid wood outside or go to the building materials market to find a professional cabinet dealer to measure and design, so that the cost can be controlled by yourself and you can also buy good things, woodworking is a woodworking process, the second is whether the material is environmentally friendly, and the third is to spray paint or something after doing it is not bought or professionally done, so it is recommended that you buy.

Generally, the carpenter of the decoration company will make cabinets on site according to the customer's requirements.

However, you can also find a furniture factory to make it to order.

1. Overall wardrobe: also called custom wardrobe, wall-built wardrobe, cloakroom, etc., which are customized products by manufacturers according to customer needs. The products produced by brand enterprises are guaranteed in terms of material, workmanship and environmental protection.

The overall wardrobe is generally composed of cabinet doors and cabinets, and consumers can choose the same cabinet doors according to the home decoration style. The interior of the cabinet can also be selected according to your own usage habits such as hanging space, drawers, lattice racks, trouser racks, dressing mirrors and other structures. At the same time, the overall wardrobe can be customized according to the actual situation of the living room space to achieve the effect of perfect use of the living space.

Customized whole wardrobe, the general manufacturer designer door-to-door measurement, after communication to determine the design drawing and place an order for production.

2. Finished wardrobe: The finished wardrobe produced by brand enterprises is more reliable in terms of material, workmanship, environmental protection, etc., and there are many styles and styles, rich choices, and it is ready to buy and install, without waiting for a long time. However, the finished wardrobe may not be able to be perfectly combined with the decoration style of the living room; At the same time, the size of the finished wardrobe is fixed, such as the wardrobe can not be done on the roof, resulting in a waste of space, in addition, the internal structure of the finished wardrobe is fixed, can not be customized according to the characteristics of consumers, and the degree of product personalization and humanization is not high.

3. Carpentry wardrobe: According to the requirements of the owner, the workers make the wardrobe by hand on site, which is cheap and tailor-made on site, which also greatly improves the utilization rate of space. However, the carpentry lacks professional equipment, manual edge banding or even no edge banding, and the material is not guaranteed, and the process depends on the experience and ability of the maker, and environmental protection, quality, and after-sales can not be guaranteed.

Find a good buy 1Cheap (compared to on-site cooking).

2.It can be moved (to make the room flexible, to change).

3.Reduce pollution.

4.The workmanship of the purchase is meticulous.

Yes, do the task.

You measure the size and then make it to order, it's very beautiful!

Hardware accessories: according to the ordinary minimum demand configuration per square meter of projection area needs 50-80 yuan, then the hardware needs to cost about 1500 yuan.

So I inquired in the circle of friends that there was a good carpenter, but I found that I didn't know what to do! Because some friends say that the customized ones are too expensive, some say that the on-site ones are ugly, and some say that the size of the finished product is not well grasped, this situation often occurs. So how do you choose?

<> is decided by ourselves, no matter what kind of cabinet you choose, there are advantages and disadvantages, others can only provide some references, which can make you have more understanding of different materials and processes of cabinets, and you can better choose yourself, the following will tell you about these two kinds of wardrobes in detail, I hope my help when you choose a cabinet.

A few years ago, I found a decoration friend to help relatives customize the wardrobe, a doorway cabinet, a 2-meter tatami mat, a set of desks with wardrobes, and another bedroom desk with wardrobes, ** is 10,000 yuan, the custom brand belongs to the top ten brands, and the plate is made of particle board, which is thousands of yuan cheaper than the normal selling price. The plates of both are visible on the inside. The installation of custom cabinets also has to be sawed and holes, and you can check the inside by picking up a board casually.

Almost no one will change the material, and the customer is not stupid. Particle boards, multi-layer boards, and finger joints can be seen at a glance.

With the labor cost, the carpenter makes the wardrobe on site. Even so, the best of carpentry on-site wardrobe production is still lower than that of finished custom wardrobes. This is an abnormal phenomenon, and it stands to reason that factory production should be lower than manual production.

In the practice of people's home decoration now, some choose carpentry to make wardrobes, and some choose custom wardrobes. Compared with the two, the overall cost performance of a custom wardrobe is higher than that of a custom wardrobe, which is cheaper or cost-effective than a custom wardrobe.

Personally, I think it's more cost-effective to decorate the wardrobe and study room by finding a carpenter. Because we only need to bear the labor cost of carpentry, as well as the material cost, but the custom wardrobe and study merchants will definitely earn some difference in the middle.

It is cost-effective to find a carpenter. Because after all, the whole house customization is particularly expensive, the whole house customization is calculated according to the projection area, the carpentry is particularly cheap, and the carpentry is calculated according to the actual area, so it is cheaper to compare it to the woodworking.

Those who have money will definitely choose customization, and those who are less economically good will choose carpentry. If I have to choose which of the two is cost-effective, I think carpentry is still cost-effective.

Personally, I think it's more cost-effective to find a carpenter, who can be customized according to the style you want, and there is still a lot of money left.

Of course, it is cost-effective to find a carpenter, because the carpenter master has good craftsmanship and is cheap, while the customized ones are generally more shoddy and very expensive.

The decoration is generally a closet, and it should be more cost-effective to find a carpenter.

Buying your own steel plate to make a wardrobe is an economical option, but whether it is cost-effective also needs to consider the following factors:

1.Material costs.

The cost of purchasing steel plates and other materials required can affect the results. Different brands, qualities, and sizes of steel plates** may vary, while other assembly materials such as screws, glue, etc. need to be taken into account. So you need to calculate the cost of all the materials you need before making it to determine if it is more advantageous than buying a ready-made wardrobe.

2.Tool cost.

Making a wardrobe requires the use of some basic tools, such as cutters, folding machines, welding equipment, grinders, etc. If you don't have these tools, you need to buy or lease them outside the money, which increases the production cost.

3.Difficulty of making.

Making a wardrobe requires a certain amount of skill and experience, especially in the measuring, cutting, joining and installation of steel plates. If you don't have the skills and knowledge to do so, you may need to enlist professional assistance, otherwise you may waste a lot of time and materials.

4.Quality issues.

When making your own wardrobe, you need to carry out quality control of materials and processes to ensure that the final wardrobe quality meets your requirements. If the materials and processes are not in place, it may affect the overall quality of the wardrobe and even have safety hazards.

All in all, making your own steel wardrobe requires consideration of factors such as cost, skill, time, and quality. If you have enough skills and experience, and are able to calculate costs correctly and handle quality issues, then making your own can be a cost-effective option. Otherwise, it may be more advantageous to buy a ready-made wardrobe.

The cost and benefit of buying your own plank for your wardrobe depends on many factors, including your level of carpentry skills, the tools and materials you need, and the cost of buying the board.

On the one hand, if you have enough carpentry experience and skills, and you have the proper tools and equipment, it may be cheaper to make your own wardrobe than to buy a ready-made wardrobe. In addition, making your own wardrobe can be designed and customized according to your needs and preferences to ensure maximum use of space and individual needs.

On the other hand, if you don't have enough carpentry experience or don't have the necessary tools and equipment, making your own wardrobe can be difficult, and it can be so bright and stuffy that it can lead to wasted materials and time. In addition, the cost of purchasing plates should also be taken into account, as high-quality plates** can be high.

To sum up, whether it is cost-effective to buy your own board for wardrobe depends on your own situation and actual situation. If you have ample carpentry skills and experience and already have the necessary tools and equipment, then making your own wardrobe can be a good option. Otherwise, it may be more cost-effective to buy a ready-made wardrobe.