What is the difference between a front wheel drive east and a rear wheel drive car

The biggest difference between front-wheel drive vehicles and rear-wheel drive vehicles is that the driving mode is different:) Front-wheel drive vehicles are cheap, fuel-efficient, economical and practical; But it is easy to produce understeer, so that the driver always has to bend the head inside, to put it bluntly, the weight distribution of the front-wheel drive car is basically in front of the obvious top-heavy when cornering, not suitable for intense handling actions, but daily driving is no problem The cost of the rear-drive car is slightly more expensive, but the control is flexible, the torque is large, but it has the characteristics of oversteer When it is serious, it is even necessary to correct the attitude of the vehicle with the reverse wheel, otherwise it will be out of control Rear-wheel drive cars are generally only used in SUVs, sports cars, and high-end sedans due to the comprehensive consideration of driving mode and cost Its front and rear weight distribution is much more reasonable than the front-wheel drive car To put it bluntly, the front drive is dragging the whole vehicle, and the rear drive is pushing the whole vehicle.

Hello front-wheel drive vehicles are cheap, fuel-efficient, economical and practical; But it is easy to produce understeer, so that the driver always has to bend the head inside, to put it bluntly, the weight distribution of the front-wheel drive car is basically in front of the obvious top-heavy when cornering, not suitable for intense handling actions, but daily driving is no problem The cost of the rear-drive car is slightly more expensive, but the control is flexible, the torque is large, but it has the characteristics of oversteer When it is serious, it is even necessary to correct the attitude of the vehicle with the reverse wheel, otherwise it will be out of control Rear-wheel drive cars are generally only used in SUVs, sports cars, and high-end sedans due to the comprehensive consideration of driving mode and cost The weight distribution between the front and rear is much more reasonable than that of the front-wheel drive car

To put it simply: the front-wheel drive car is dragging and running, and the rear-wheel drive car is pushing and running. Front-wheel drive vehicles have an advantage on snow and ice, and there will be no noticeable tail flick when accelerating, but there will be problems with head push and understeer.

Rear-wheel drive cars have great advantages in driving control, which are incomparable to front-wheel drive cars, and they are more fun to drive, and they are also the favorite of old drivers. However, rear-wheel drive vehicles are relatively slightly more fuel-intensive, because front-mounted rear-wheel drive vehicles need to have a drive shaft, which increases resistance. FYI: Please set to .

The difference between the front and rear of the engine, right?

The difference between a front-wheel drive car and a rear-wheel drive car is the difference in uphill conditions and the difference in engine.

First, the difference in uphill conditions.

When driving on the ramp, the grip of the front-wheel drive car will be very poor, and the rear wheels will not be able to attach the power, and the front wheels will be dragged and skidding; The rear-wheel drive car is in the form of the rear wheel pushing the front wheel, which is not easy to skid.

Second, the difference between engines.

Rear-wheel drive cars use longitudinal engines, which take up a lot of rear space; Most front-wheel drive cars will use front-engines, and the engine is relatively forward, and the space of the same front-wheel drive car is much larger than that of a rear-wheel drive car.

Third, the difference in handling performance.

Generally, the front wheels of a front-wheel drive vehicle are responsible for steering and driving on the other, which is a heavy burden. If you make a sharp turn, there will be a phenomenon of pushing your head; The weight of the rear wheel of the rear-wheel drive car is relatively large, the inertia is relatively heavy, it is easy to flick the tail, and it is not easy to drive the rear-wheel drive car on the ice and snow road.

First, the difference in uphill conditions.

When driving on ramps, the grip of the front drive will be very poor, and if the rear wheels are not energized, the front wheels will slip. Rear-wheel drive is a form in which the rear wheels push the front wheels and are not prone to skidding.

Second, the difference between engines.

Rear-wheel drive vehicles are fitted with longitudinal engines, which will take up a lot of rear space. However, most front-drive vehicles will use a front-engine. The engine is mounted on the front and has much more space for the same front-drive vehicle than for a rear-drive vehicle.

Third, the difference in handling performance.

In general, the front wheels of the front drive unit are responsible for steering and driving, which is very heavy. If you make a sharp turn, you'll hit your head. Rear-wheel drive has heavier rear wheels and greater inertia, so it's easy to flick their tail and it's not easy to drive on icy roads.

Fourth, the difference in comfort.

In terms of interior space expansion, front-wheel drive vehicles are better than rear-wheel drive vehicles.

The difference between a front-wheel drive car and a rear-wheel drive car is mainly in terms of engine, handling, fuel consumption, etcThe specific differences are:

1. In terms of engine, rear-wheel drive vehicles mostly use the longitudinal engine mode, and front-wheel drive vehicles adopt the engine transverse mode, which can free up a lot of space.

2. In terms of handling, the front wheels of front-wheel drive vehicles need to be responsible for steering and driving, and the burden is relatively large, while rear-wheel drive vehicles are prone to tail flicking due to the heavy inertia of the rear axle.

3. In terms of fuel consumption, rear-wheel drive vehicles consume more fuel than front-wheel drive vehicles due to the loss of power loss efficiency due to the power loss efficiency of the drive shaft.

4. The grip is different, when driving on the ramp, if it is a front-wheel drive car, the grip will be very poor, and the rear wheel will not be attached to the power, and the front wheel will be dragged and skidd. The rear-wheel drive car is in the form of the rear wheel pushing the front wheel, so it is not so easy to slip.

"Fun and Rising Posture" DIY car maintenance program "Brother Masturbation", weekly.

3. Updated on Friday.

What is the difference between a front-wheel drive model and a rear-wheel drive vehicle? After listening to the old driver's explanation, I instantly understood.

Front-wheel drive and rear-wheel drive vehicles, how do you choose.

The difference between front-wheel drive, rear-wheel drive, and four-wheel drive.

What is the difference between front-wheel drive and rear-wheel drive vehicles**? What are the advantages and disadvantages of each?

Front-wheel drive vehicle refers to the vehicle driven by the driving wheels in front, and most of this drive form is used for small vehicles such as cars, because the engine of the car is relatively heavy in front, so it is front-drive. Trucks are all rear-wheel drive vehicles, because the cargo compartment of the truck is in the back, and its weight is in the back, so the trucks are basically rear-wheel drive.

Speaking of safety, rear-wheel drive cars are much higher than front-wheel drive cars, front-wheel drive car steering and power are in the front wheels, prone to failure, once the front wheels fail, usually in the urban area at low speed is not a big deal, if it is high-speed, the consequences are unimaginable! If the front wheels of the front-wheel drive car are connected to the engine, once the engine's pistons, cylinders, crankshafts, timing belts (chains), gearboxes, etc. are stuck, it will be a disaster for high-speed vehicles.

Most people have probably driven a rear-wheel drive vehicle before, which is essentially the transmission of power from the engine through the drive shaft to the rear wheels of the vehicle. Rear-wheel drive is used in vehicles when sporting purposes are required or when off-road ability is required. RWD offers some benefits that front-wheel drive can't, mainly that it offers better acceleration, handling, and weight distribution.

There are several good reasons to use an FWD vehicle, even if the RWD vehicle looks better overall. The main reason is that they are cheaper for manufacturers, thus providing consumers with lower purchases**. The engine, transmission, steering, and other components are placed at the front of the vehicle, which means it can be manufactured and installed as a unit in the factory.

There is less work involved in the manufacturing process and fewer parts are required in the manufacturing process, which reduces the cost for everyone.

Better acceleration can be expected for RWD vehicles as weight transfer and distribution forces the rear tires to dig more into the ground, resulting in more traction from the tires. The reasoning for processing is the same, the better the overall traction you have, the more control you'll be able to maintain. So when you accelerate, the rear of the car is pushed to the ground, which helps the tires maintain traction.

The same logic is why spoilers are used, forcing the car to provide additional traction to the ground.

Another benefit of FWD vehicles is that they generally handle better in adverse weather conditions. The reason for this is that if you start losing control in rain, snow and ice, your vehicle will not swing violently to one side or the other. Instead, you'll usually go straight.

Also, when many people lose control, they either tend to hit the brakes or try to accelerate. For FWD or RWD vehicles, the use of brakes is rarely recommended. With FWD, you'll want to speed up because once you're back in traction, the car will be pulled forward, pulling the rear end.

However, when using RWD, if you accelerate, it will cause the tail end to swing outward, causing the vehicle to lose control.

The biggest difference between the two volt scramblers is that it depends on which one you'll be driving, as they are both handled in very different ways. It's important to remember that RWD vehicles are essentially pushed from behind. When towing an FWD vehicle, you can better understand how the vehicle reacts in certain situations if you imagine this while driving, being pulled, or pushing.

If the FWD vehicle is turning and loses control, usually the vehicle will remain in the forward path. Adding imitation spike speed is an operation that needs to be performed in order to straighten the vehicle. RWD vehicles lose control when turning, and their tail end swings in the direction of the turn.

The first point before the collapse is that the front-wheel drive car is larger, the front laughing spine drive engine is basically horizontally touched, the rear-wheel drive car may be slightly smaller, the engine is placed vertically, so the distance between the door seam and the tire in the later stage is relatively far, the rear space of the rear-drive car is not sufficient, and the car is more expensive to repair in the later stage.

The difference is very big, the driving force is not the same, the setting of the drive system is also different, the rear-wheel drive car's moving mu brigade stove force system is relatively more sufficient, the difficulty of driving quickly is not the same, and the acceleration of driving is not the same.

When the front-wheel drive car is climbing or walking on a flat road, the wild jujube is mainly after the first two wheels are forced, and the last two wheels are forced.

The way of driving is different, the front drive is to take the car with it, and the rear drive is to push the car forward, and the price of the front drive car is relatively cheap.

The biggest difference is that the drive mode is different, the front wheel drive is driven by the engine, and the rear wheel drive is driven by the engine.

1.The difference between front-wheel drive and rear-wheel drive from the engine sideline: the front-wheel drive of the car adopts the engine level mode; Most rear-wheel drive vehicles have a vertical engine mode.

2.From the perspective of mobility, the front wheels of the front-wheel drive car need to be responsible for steering and driving, and the burden is relatively large; Due to the large inertia of the rear axle, the rear-wheel drive is prone to tail flicking.

3.In terms of driving performance, the grip of the front wheel drive is worse than that of the rear wheel drive, and it is easy to slip; Rear-wheel drive vehicles have a more balanced weight distribution, with the front wheels responsible for steering and the rear wheels responsible for driving with minimal pushing.

4.The drive forms of the car include front and rear drive, front drive, rear drive, mid-rear drive, and all-wheel drive.

When buying a car, you should consider the cost performance of the vehicle from many aspects. Regarding the drive of wheels, it is mainly divided into "two-wheel drive", "four-wheel drive", "front-wheel drive" and "rear-wheel drive". Previously, we learned about "two-wheel drive" and Luqi "four-wheel drive".

Difference Between Front Drive and Rear Drive

1. The driving experience is different: in daily driving, the front wheel drive is the front two wheels "pulling" and walking, while the rear drive car is "pushing" the back two wheels. When making sharp turns, the front-wheel drive car is overpowered, and the phenomenon of "understeer" occurs, that is, the front of the car is pushed outward.

2. Different handling: When accelerating, because the center of gravity of the car is shifted from the front to the rear, the rear-wheel drive car can get better grip and better handling, while the front-wheel drive car will have slightly worse steering accuracy.

3. Different space: in the case of the same wheelbase, because the rear-wheel drive car adopts a longitudinal engine, it often occupies the space in the car; Most front-wheel drive vehicles have transverse engines, which are positioned far forward, and the interior space will be larger. Rear-wheel drive cars are affected by the body structure, and the rear floor will be chaotic and high, which will affect the riding experience of passengers in the middle of the rear row.

4. Different appearance: The main difference between the appearance of the front wheel drive and the rear wheel drive is the visual effect on the side. Front-wheel drive models generally have a longer front overhang, while front-wheel drive models have relatively short front overhangs and a slender nose.

4. Different use costs: in terms of maintenance, the difference between front-wheel drive vehicles and rear-wheel drive vehicles is small; In terms of fuel consumption, the influence of the drive form and vehicle weight, engine displacement, and gearbox are smaller.

The differences between front-wheel drive and rear-wheel drive vehicles are as follows:

1. Encounter steep slopes: The uphill ability of the rear-wheel drive car is better than that of the front-wheel drive car, and the front wheels of the front-wheel drive car are easy to slip when going uphill.

2. Rain and snow: Rear-wheel drive vehicles are very prone to skidding in rainy and snowy days, so rear-wheel drive vehicles are more difficult to control than front-wheel drive vehicles.

3. Cost: Because the rear-wheel drive car has an additional set of devices to transmit power from the front wheel to the rear wheel, it is generally the highest high-end car, and the price, maintenance cost, and maintenance cost are higher than the front-wheel drive car, and the fuel consumption is not much different.

The benefits of front-wheel drive are:

1. Compact structure, which is the biggest benefit. Front-wheel drive cars can reduce the propeller shaft, and the gearbox and clutch and the drive axle can be made together, reducing the components of the drivetrain and saving space. Front-wheel drive vehicles can also change the engine from longitudinal to transverse, reducing the power direction of the conversion link.

2. The braking performance of the front wheels has been improved. Since the engine and drive train are in the front of the vehicle, the center of gravity of the car is forward, and the center of gravity of the car is shifted forward during braking, resulting in an increase in the load on the front wheels, and the braking force of the front wheels is also increased, making the front wheels not easy to lock during emergency braking (without ABS).

3. The comfort of the front seat of the car is better than that of the rear seat. Because the center of gravity of the car is forward, the ratio of the bearing mass to the non-bearing mass of the front wheel suspension system is greater than that of the rear wheels, and the larger the ratio of the bearing mass to the non-bearing mass, the better the comfort.

4. The steering performance has been improved. The front wheels are both driving wheels and steering wheels, which make it easy to control the direction of travel when steering, and it is not easy to oversteer, and the steering safety is also improved.

5. Cost reduction. Due to the saving of the propeller shaft, independent gearbox, final reducer box (commonly known"Dental bag"so that the cost of the whole vehicle can be reduced.

6. The interior space is relatively spacious. The cancellation of the transmission shaft makes the floor in the car relatively flat, but it still cannot be completely flat, because in addition to the transmission shaft, there are exhaust pipes, fuel pipes, electrical wiring, etc., which will still make the floor in the car bulge;Originally on the rear axle"Dental bag"The rear seat has to be moved back and the luggage compartment volume has been increased.