How to remove the mural painted on the wall in its entirety 40

1. The general old wallpaper is pasted on the wall in the form of self-adhesive, so that you can use a hair dryer to blow the wallpaper on the hot air block, and the wallpaper can be blown off after a while.

2. Another way is to use the water that is often used in decoration, spray it on the wall, and tear it down after a while.

3. The last method is better. It is directly installed on the old wall with the roller blinds of landscape paintings, and you can roll them up when you don't want to. It can be used as a mural without destroying the original walls, and this method is best if you rent a house.

This depends on what material you are using in the base of the mural, what kind of material is used to paint the mural, and there are different methods in different situations.

Murals can be mounted on the wall in four ways: nail-fixed, hook-fixed, placed directly, and hoisted.

1. Nail fixation

This is the easiest installation method, but it will cause some damage to the wall, before using this method, be sure to consider the determined location, do not change it easily.

2. The hook is fixed

With a hook for hanging pictures on the closed wax door, different specifications can bear different weights, and the maximum can bear 20 catties. There are very hard and fine steel needles on the hook, which is suitable for hard walls, will not nail cracks in the wall, and at the same time is convenient to change the painting, which will not affect the overall appearance.

3. Place it directly

Placing the painting in front of the wall, suitable for relatively large paintings, setting up shelves on the wall, on the shelves can be placed paintings and decorations, or on the cabinet to place paintings is also a good choice.

4. Lifting

Hang the hanging line or decorative rope or chain from the top surface, hang the painting, and hang one or more paintings at the same time, or you can use nails to nail the ceiling base, and then use the fish wire to hang the painting according to the height you require.

How high the murals are generally hung

Murals are generally hung at a height of about meters. The hanging height of the mural is generally based on the human visual level as the standard, in the range of the mural elevation angle is 60 °, the height suitable for hanging is selected, and the appropriate adjustment is also required according to the overall height of the mural and the size of the furniture.

How to hang the mural on the wall Step 1: Choose an alloy drill bit with the same diameter as the expansion screw expansion ring (tube), install it on the electric drill and then punch the wall, the depth of the hole is best the same as the length of the bolt, and then put the expansion screw kit down to the hole, remember; Do not unscrew the screw to prevent the bolt from falling into the hole when the hole is drilled deep and it is difficult to take it out. 2：

After tightening the screw 2-3 buckles, feel that the expansion bolt is relatively tight and not loose, and then unscrew the screw, and then align the fixing parts with holes on the fixed item to the bolt, install the outer gasket or spring washer and tighten the screw. 3: 6mm punch 10mm hole; 8mm punch 12mm holes, and punch wall slag holes according to the outer diameter of the expansion tube.

If the brick wall is soft, choose a smaller drill bit. As long as the thread part is long enough, the deeper the casing part is, the stronger it is.

How to re-stick the mural on the exterior wall if you want to do a long-lasting paste, you can choose to use white latex, or use a professional glue to paste wallpaper, and you can use double-sided tape, etc., but it will not be easy to remove after pasting things on the wallpaper. Extended data glue is an intermediate connecting two materials, mostly appearing as an aqueous agent, belonging to the fine chemical category, with a wide variety, mainly classified by sticky, physical form, hardening method and adherent material. The common ones are instantaneous adhesive (the common -1203 instantaneous adhesive-cyanide ethyl acrylate strong instantaneous adhesive is a kind of instantaneous adhesive), epoxy resin bonding, anaerobic adhesive, UV glue (ultraviolet light curing), hot melt adhesive, pressure-sensitive adhesive, latex, etc.

Dear, I'm glad to answer for you: How to remove the wall painting Answer: The first method of slag sail:

Cleansing water removal method 1: Pour an appropriate amount of cleansing water on the cleansing pad. 2. Then use the soaked cotton pad to start wiping the crayon print. 3. As long as you gently wipe back and forth a few times, if the child is painted on the white wall is a crayon, you can first use a hot towel to compress it, and then clean it up. If the pencil on the wall is drawn like a hailstone, the color is very dark.

Construction method of the mural:

1.Before posting the mural, make sure that the wall is flat and fill in the uneven areas with filler.

2.Spread the murals side by side to see if the patterns fit together to make sure there are no obvious defects.

3.Apply glue to the wall with a width of 2 3 degrees, after 10 minutes of glue on the wall, start to apply the mural, the height of the mural should be high enough so that a small part extends beyond the edge of the corner so that it can be trimmed.

4.Hang a heavy object (such as scissors) with a string, measure whether the mural is really straight, flatten the mural with a tool, squeeze out the air bubbles, and be careful not to stick glue to the tool at the edges.

5.Cut off the edges near the ceiling and use larger boards for support.

6.Paste the next mural and overlap the flowers at 1 cm of the overlapping part until the pattern basically matches!

7.Cut in the center of the overlapping part, tear the cut scrap and gently wipe off the spilled glue.

8.Continue to paste other murals, pay special attention to the joints, and you're done!

Tips: 1. The wall should be treated flat, and the mural should be brushed with a layer of base film or varnish to dry 2 days ago, and the base film or varnish will protect the wall and also play a role in preventing mildew and moisture.

2.After the mural is received, according to the order of the lower right corner, the whole is spread on the ground to check the height and width of the picture, and the overall situation and color are spliced.

3.Remove the white edges that protect the wear and tear of the screen during transportation.

4.Where the stitching is placed, there is a centimeter of the picture that coincides with each other. When pasting, cut it from the middle of the overlap and remove the excess, so that a seamless effect can be achieved.

5.After pasting, close the doors and windows to dry in the shade for 3-4 days.

I heard that the wall needs to be smeared with a layer of transparent paint, what is transparent paint? Is it wall-specific? It's not dedicated to the wall, but it's usually painted on the wall, and you can paint it directly on the latex paint, and you mean transparent paint.

Stickers on the wall, generally paste, glue, and thumbtacks are often easy to be eaten by insects or rust, and they don't answer when they need to be removed.

Easy to tear clean. If you can switch to toothpaste stickers, you won't suffer.

Insect eaten, when you need to take it off, you can remove it as soon as you want to, and there are no marks on the wall.

traces and rust spots. When you hang calligraphy and paintings on the wall, you can also buy a pair and the size of calligraphy and painting.

Corresponding velcro, glue one side of the nylon buckle with white glue.

On the wall, the other side is glued to the back of the calligraphy and painting (if the texture of the calligraphy and painting is more textured.)

Lightweight, just stick a velcro fastener on the upper end. If calligraphy and painting.

heavier, you need to stick one on each of the four sides). Pay attention to the back of the calligraphy and painting.

The position of the upper velcro should correspond. After the white glue is dry, will.

Put the calligraphy and painting on the wall, and gently press the Velcro with your hand to bite it tightly, so that the calligraphy and painting are hanged.

When hanging calligraphy and paintings on the wall, it is often not easy to hang them straight.

In this regard, you can take a thin rope, tie a small object (such as a bunch of keys) at the lower end, and press the rope on the wall when sticking calligraphy and painting.

The left and right sides are aligned with the line. In this way, the calligraphy and painting are not only time-saving, but also upright.

1. The top has been painted.

Some owners do hand-painted wall paintings when the ceiling is not painted, which can easily cause the paint to fall on the painted wall when painting the ceiling, which will waste a lot of time to deal with the paint that has fallen off. Therefore, the correct order is to paint the ceiling first and then hand paint.

2. The wall surface is smooth and smooth.

Due to the uneven quality of home decoration construction, the bottom layer of some walls, that is, the putty layer, is not handled properly, and there will be potholes and unevenness. In this case, no matter how thick the paint is, it cannot be covered. It looks okay during the day, but at night, when the lights do, the uneven wall will make you look more and more unpleasant.

Therefore, it is a better measure to ask a more professional wall treatment personnel to check the lights after the construction is completed.

3. It is best to use latex paint with good quality.

Latex paint is a type of paint. Now in many users, the use of ordinary paint to paint the wall is still the majority, the advantage of this ordinary paint is that it is relatively cheap, but the disadvantage is that the adhesion to the wall is not too good, and it is easy to be rubbed off by objects. From our experience in making hand-painted wall murals, it is recommended that the owner use a relatively high-quality latex paint to paint the wall you want to murals.

Because the adhesion between the latex paint and the wall is very good, and the water resistance is also strong, it is convenient for the owner to clean and maintain it in the future. There are also some bulk latex paints available on the market, which can be purchased flexibly depending on the size of the wall.