The standby time of the Dell laptop is adjusted to 10 like this

Power management, which adjusts the working time of the screensaver and the hard drive separately when not using external power.

Click Start, and then click Control Panel.

Click Performance and Maintenance.

Click Power Options.

In the Power Options Properties dialog box, on the Power Usage Scenarios tab, click the Power Usage Scenarios drop-down list and select the power usage scenario that most closely matches how your computer is used.

If applicable, adjust the System Standby and System Hibernation settings if you're not satisfied with the default selection.

Standby reduces power consumption by shutting down the most power-hungry components of your PC when it's not in use. It only takes a few seconds to start your computer from standby. The hibernation function will save the program and shut down the computer completely.

Your computer doesn't use power when you sleep, but it takes a few more seconds to recover from hibernation when you need to use it again.

Setting the delay before standby and hibernation to a short time can reduce power consumption, but waiting for your computer to boot up may be inconvenient.

On the Advanced tab, you can adjust the default behavior of your PC's power button. On laptops, battery life can be significantly extended by setting the "When I close my laptop" option to "Standby".

On the Hibernate tab, select Enable Hibernate if you haven't already.

Click OK.

Power management options, such as System Standby and System Hibernation, are a trade-off between power savings and ease of use. If you find it difficult for your computer to go into standby or hibernation, repeat these steps to increase latency or disable these features altogether.

Notebook standby time mediation method:

Start Menu --- Control Panel.

- Hardware & Time --- Power Options--- Change schedule settings --- put the computer to sleep (set time).

Hello, here's how:

Control Panel > Hardware & Sound > Power Options > Replacement Plan Settings.

Then use the computer inside to do sleep time growth.

3. If you don't want to turn off hibernation, just change the system into standby or hibernation for a longer time in the power management. .This seems to be set up in power management. .Mine too.

How to set up: 1. Open the "Control Panel", click "Appearance & Personalization" and "Change Screen Saver".

2. In the "Screen Saver Settings" window that opens, select a screen saver, such as "Ribbon", and set the "Screen Waiting Time", such as 1 minute, and check "Show landing screen on recovery". Finally, click "OK" to complete the setup.

3. After setting, when the comma cannot reach the computer within 1 minute, the screen saver will be automatically started. If someone else is using the computer at this time, it will automatically take you to the login screen.

4. In addition, you can also lock the computer screen by setting an independent screen saver password. How to do it: In the "Screen Saver Settings" window that opens, select a screen saver, such as "Streamer", and click the "Change Power Settings" link.

5. In the window that opens, click on the option "Require password when waking up".

6. In the interface that opens, select "Create or change user account password".

7. Set a screensaver password for the current or specified user in the interface that appears.

8. When you want to lock the computer screen, you only need to press the key combination "win+l" to lock the computer screen. If you want to enter the desktop again, you will have to enter the password you just set.

1. Enter the BIOS program settings: After the power is turned on, when BOIS is posting, press the key to enter the main screen of the BIOS program program.

2. Enter the power saving function setting, select the button on the main screen of the BIOS setting program to enter the power saving function setting.

3. The default setting is modified to: The ERP Support option gives you the option to choose whether or not to consume less than 1 watt of power when the system is shut down (S5 standby mode). (default: disabled).

Please note: When this feature is enabled, the following four functions will have no effect: power management event wake-up, mouse boot function, keyboard boot function, and wake-on-LAN function.

1. How to set and adjust the standby time of the computer: first open the "Start" menu of the computer, find the "Control Panel" of the computer after opening, and then click with the mouse to enter, and after entering, open the dialog box of the "Control Panel".

2. After entering the dialog box of "Control Panel", find the "Hardware and Sound" option in "Control Panel", in which you can set the hardware resources of the computer system.

3. After completing the hardware settings of the computer system, turn on the "Power" option in the "Hardware and Sound" option, and set the system power supply accordingly.

4. After completing the system power setting, find the words "Select the time to turn off the monitor" on the left side of the page and use the mouse to select, or you can modify the computer sleep time.

5. After completing the setting of the display time of the display, the battery box is set briefly, and the brightness of the computer screen connected to the battery, the setting of the sleep state and the brightness of the display screen, we only need to change the sleep to not sleeping, and then save it.

6. First use the command line program of the computer to check whether the standby computer has the function of standby wake-up, enter "powercfg-a" in the cmd command, and then press the enter key of the keyboard, so that you can see whether the computer has the function of standby wake-up.

7. If the computer has the function of standby wake-up, you need to check whether the mouse and keyboard connected to the computer have turned on the function of waking up the standby computer, if the keyboard and mouse do not have the function of waking up the standby computer, we need to enter the device manager of the computer, find the keyboard and mouse and other hardware devices in the device manager, and check that the device can be used normally.

8. If there is no problem with the device, then we can find the power management option in the properties page of the mouse, and then check the box before the box to let the mouse have the function of waking up the standby computer, and then use the mouse to wake up the computer.

The boot time of the laptop is related to the amount of software installed, the number of startup items, the computer configuration, and so on.

Solution: 1. Take win7 as an example, press the assembly win+r.

2. Enter msconfig--OK in Runtime.

3. Click Start.

4. Except for the input method and security guard, do not check the others - OK.

5. Restart the computer.

6. You can also use 360 security guard to optimize and accelerate the computer, clean up the computer and other operations.

Note: Computer optimization, if you are familiar with the operating system, you can do it manually, if you are not familiar, you can use the third-party software 360 security guard to carry out.

Hello, you can go to our Dell technical forum to check the information, the content here is very comprehensive.

Is your 1-minute plus 360 cue? If it is, it must be long, and it should generally be around 40 seconds.

It's very normal,There are a lot of programs that I can't use on the computer I just bought.,And it's booted up.,I usually restore it to the original point first and then the next 360 security guard.,Remove what I don't need.,Turn off what can't be removed.,And antivirus software with Kingsoft.,That's much better.。

This problem is that you use the optimization master to optimize everything that can be banned.

The machine I bought at the beginning was usually about 35 seconds, and I used this for two years, and now it's 50 seconds

Haha, it's normal, don't care too much about the boot time, but you can use 360 to optimize the boot startup item that you shouldn't use.

1.Install the driver.

Check the Control Panel Hardware & Sound Devices & Printers to see if the installation is complete.

2.Install the debugger.

The printer is turned on, and the printer needs to be connected to the computer.

Next, "browse" to select which disk to install.

<> this point, the installation is complete.

3.Set the language as well as the standby time.

The printer is turned on and the printer is connected to the computer.

Open the debugger. The initial English version was modified, and the language was changed to Chinese simplified

Restart the debugger, select model 3230, and check "Sleep time".

Set a sleep time.

n=0, no sleep.

n>0 in minutes.

Click Send and you're done!

Reinstall the graphics card driver If there is no problem with the hardware, then the system cannot enter the standby state for two reasons:

1.The user disabled the virtual memory. For this reason, you can simply re-enable virtual memory to troubleshoot.

2.There is not enough temporary space in the system. This fault is more likely to occur especially if the remaining space on the computer's C drive is less than the computer's physical memory capacity.

To solve this problem, you need to partition reasonably to ensure that the system partition has enough free space, that is, at least ensure that the remaining hard disk space of the system partition is more than twice the physical memory.

That is, your computer motherboard driver is not installed or not installed completely, standby and hibernation are supported by the motherboard, you can install all its drivers again. You can also check whether it has been blocked by malicious **? Yes:

Start-Run, type"regedit", OK to open it, and then find it"heky-current- use software the primary key for Microsoft Widows Currentvession Policie Explorer, and then you see three key values to the right"norun","noclose"with"nologoff", they corresponded separately"No running, irrelevant and no log-out functions, just delete them, try to go down?

Hello, you can find the power options from the control panel, which shows how to turn off your sleep state and set the standby time.

When you re-run it, there will be the sound of the hard drive and the fan, as long as it's not too exaggerated! Normal, not assured can be repaired.

This shouldn't be a problem.,This should be a prompt sound for recovering from standby.,It's the default of the computer.,Can't change it.,Mine also has.,It's normal.。