What brand of oil press is good for an oil mill

1. Hydraulic oil press.

The hydraulic oil press is a traditional small oil press, and the production process is intermittent. The process is characterized by low operation technical requirements, high oil yield, and high crude oil, but the labor intensity is large. The applicable occasions of the hydraulic oil press are:

The processing capacity is small, the production is small, and the daily processing capacity of a single unit is about 1 ton.

2. Screw oil press.

The fully automatic screw press is an oil press that can operate continuously. The technical characteristics are: low operation technical requirements, high oil yield, poor crude oil quality compared with hydraulic oil press, and labor intensity lower than that of hydraulic oil press.

The automatic screw press is suitable for small processing capacity, small workshop production, and the daily processing capacity of a single machine is about 2-8 tons.

3.Large and medium-sized screw oil press units.

The screw oil press unit is suitable for large and medium-sized, continuous and large-capacity oil plants. The technical characteristics are: continuous production, low labor intensity, and high oil yield.

The equipment of a single oil press is about a few thousand yuan. If it is an oil press production line, it will probably range from tens of thousands to hundreds of thousands of yuan. If you want to do a small oil processing plant, you can use a small oil press production line, which will have a higher degree of production efficiency and automation.

But if it is a workshop self-employed.

The output is generally not high, and a smaller fully automatic oil press can be chosen.

Oil mills generally use large oil presses, and the output is generally there.

In the case of a continuous day, several meals, that is, at least three or four hundred catties per hour, Qilong screw oil press strip oil press, you can look at it.

You are **, oil press or Sichuan machine***, the oil yield depends on the quality of raw materials, this is not necessarily, if you need an oil press, contact me, I can provide you!

Do you want to buy a large or small one, I personally think that the national research brand is good, you can squeeze a lot of raw materials, the oil yield is very high, such as peanuts can reach more than 45 percent, good or bad personal say, or to see on the spot yourself.

If you want to open a small oil mill, it is recommended to choose an efficient, easy-to-operate and durable oil press. Here are a few common types of oil presses:1

Centripetal oil press: This oil press is suitable for processing small oil crops such as sesame, peanuts, walnuts, almonds, etc. It has the advantage of a high oil extraction rate, but it requires frequent cleaning and maintenance.

2.Spiral oil press: This oil press is suitable for processing large oil crops such as soybean, rapeseed, and cottonseed.

Its advantages are high oil extraction rate and good durability, but the volume is large and requires a large footprint. 3.Manual oil press:

This oil press is suitable for small oil mills and home oil production. Its advantage is that it is lower, easy to carry and operate, but the oil extraction efficiency is low. 4.

Electric oil press: This oil press is suitable for small and medium-sized oil mills and individual oil production. Its advantage is that the oil extraction efficiency is high, easy to operate, but it needs to be supported by electricity, ** high.

In general, when purchasing an oil press, you need to choose an oil press that suits your needs according to many factors such as oil type, oil extraction volume, operation difficulty, maintenance cost and so on.