When decorating a home, how is the water pipe of the wall hung boiler connected?

Wall-hung boilerWhen installing, it must be a double pipe, one pipe is used for heating, and the other pipe is circulating cold water, so that it can work normally, and the radiator ignition can play a role. Pay special attention to the installation, the important step is the hot water pipe, the cold water pipe connection valve, otherwise the hot water flows into the cold water pipe, this situation is useless. Under normal circumstances, the installation of wall-hung boilers is a professional master, and hot water and cold water will not exist in the same pipe.

If you want to install a wall-hung boiler, of course, the water pipe needs to be built in advance, and many owners around you will choose a water heater with zero cold water when decorating. In this case, if the water pipes are not in place, there is no way to control all the functions. Hydropower is the most important step in decoration, don't be careless, choose a professional hydropower master, and the arrangement of water pipes is very orderly.

There are some amateur plumbers who arrange the pipes that are particularly messy, and it is very troublesome if you want to repair them later. <>

If the pipes of the zero cold water heater are not qualified, there is no way to control the temperature, when installing the pipes, the cold water and hot water must be separated, and the cold water heater can also be used if the cold water heater is discharged first. The wall-hung stove is basically installed in the kitchen, so that both the bathroom and the kitchen can be used. It is very convenient to use hot water to wash dishes in winter, but some people will make mistakes in the water pipes during decoration, which will affect the later use, and installing extra faucets will also affect the normal.

When buying heating equipment like this, it is still necessary to choose the brand, communicate with the professional person in charge, and choose the energy according to the size of the furniture. Seasons.

will be used in wall-hung buildings, and the quality must be guaranteed. Now the monitoring and testing of the new technology of German gas inverter is very safe, it will be protected and controlled technology, and the cold and heat will be built for the stability of the user. The radiator low-noise coil circulating system fan is more convenient to use and is also responsible for the owner.

There are also a lot of wires in it when connecting, and each wire represents a different meaning, it is necessary to connect them, and then glue them with adhesive tape.

The gas wall-hung boiler may be directly connected to the heating, and then some stainless steel pipes with better performance should be selected, and high-temperature resistant pipes should also be selected, and water collectors and water separators should also be installed.

The water pipe of the wall-hung boiler is connected by connecting the pipe, and the texture of the material must also be maintained.

Wall-hung boilerIt can be kept warm, but the short pipe is not enough, it must be a double pipe, one pipe is used for heating, and the other pipe is used to circulate cold water. This way the ledge will work and the radiator will work.

Let's take advantage of the flagship of the Kim brothers. This pipe is the so-called heating ** pipe. **Pipes can still be set up for return without built-in heating, but special attention is paid to installation, and one of the important steps is to install a one-way valve at the junction of the hot and cold water pipes.

Otherwise, it is useless for hot water to flow into cold water pipes.

This can be achieved, but the effect is actually unstable, it is not easy to recover, and some of the warm water flows into the cold water pipe. The main function of the heating pipe is to separate the hot water and the cold water, and do not share the same pipe. It is desirable to install hydraulics on electricity in advance.

Many of my friends around me still need to install zero cold water water heaters and heating return oil pipes, all the functions of zero cold water heaters do not have temperature control. If there is no heater return pipe, cold water should be discharged first when used, and hot water is discharged faster than ordinary water heaters.

If the water heater is installed at home, the water heater is more away from the shower and washbasin, so it makes no sense to install a water change, pour water into the water heater, and never wash your hands with cold water in winter. If you plan to pour water during the renovation, you can bury the heating on the water power in advance. After all, there is no heating, and you will have to pour water for the ** pipe in the future.

It's okay to use, but the cost will be a little more, connect the three-sided pipes to the ** pipe of the wall-hung boiler, and install the faucet on the excess pipe, which will not affect the normal use of the wall-hung boiler, and you can also use the domestic water in the wall-hung boiler normally.

Heating equipment expert set, gas fireplace heater, electric vertical heating brand, warm, healthy, happy and auspicious, a century-old enterprise responsible for the industry and ordinary people; Integrity management, quality sales; Three-layer sleep energy-saving technology, no need to unplug in spring, summer and autumn. German gas-powered automatic frequency conversion energy-saving new technology, safety protection, monitoring and testing, composite constant temperature bath control technology, cold and heat refusal; External temperature probe for innovative user stability; Suitable for triple sealing, low noise, radiator, coil circulation system.

Fan coils and other terminal equipment.

If you are using a dual-function wall-mounted boiler, there are 5 ports at the lower end, from left to right, 1Heating and water supply 2Life water (hot water) 3

Natural gas pipe 4Life inlet water (cold water) 5For heating return water, according to the "2000 General Pipeline Engineering Code", the piping system connected to the hot water end should not be directly connected with plastic pipes within at least 500mm initially, and it is recommended to use metal pipes to connect.

There are detailed instructions below the wall-hung stove!! It's also on the manual!

The wall-hung boiler connected radiator must be connected to the tap water pipe, and the wall-hung boiler connected radiator heating system should be filled with water with tap water and replenished during normal operation, and the water filling and replenishment should be carried out in accordance with the technical specifications.

Gas wall-hung boiler is a set of water, electricity, gas (fire) in one, can provide domestic hot water and independent heating of advanced equipment, the use of both convenient and not affected by external factors, due to the characteristics of heat conduction, the actual operating cost of the wall-hung boiler and the construction has a close relationship, the main influencing factors are the insulation of the house, the thickness of the wall, the insulation material, the insulation of the window, etc.

In the installation of gas wall-hung boiler, there are usually 4 water pipes connected to the gas wall-hung boiler, one of which is a tap water pipe, a domestic hot water pipe, a heating outlet pipe, and a heating return pipe.

The connection method of the water pipe of the wall-hung boiler is relatively simple, and the connected water pipe and corresponding tools need to be prepared before installation to ensure that the connection process is smooth and firm. Generally speaking, the water pipe connection of the wall-hung boiler mainly includes the inlet pipe and the outlet pipe. Here are the detailed water pipe connection methods:

1.The main valve before opening and closing the door must be closed first, and the front panel of the wall-hung boiler needs to be opened to find the refill and outlet pipes.

2.Connect the water inlet pipe to the water recharge pipe of the wall-hung boiler, which can be connected with an elastic hose or a seamless steel pipe. Note that when using seamless steel pipes, a filter needs to be installed at the water pipe connection to prevent impurities in the water from entering the wall-hung furnace.

3.Connect the outlet pipe to the outlet pipe of the wall-hung furnace, which can also be connected using an elastic hose or seamless steel pipe. Attention should be paid to the position of the outlet pipe connection, generally close to the discharge port of the wall-hung boiler, and the position should maintain a certain height difference with the ground, so as to facilitate the discharge water to flow to the drain port.

4.Before connecting the water pipe, the impurities in the water pipe should be cleaned to avoid affecting the smooth flow of water. It is recommended to place several layers of packing at the pipe head when connecting cold and hot water pipes to strengthen the sealing of the water pipes, and at the same time prevent the pipes from fluttering and loosening.

5.After the connection is completed, it is necessary to check whether the water pipe is connected tightly and whether there is any water leakage. In addition, before connecting the pipes, we need to inspect the pipes and the inner walls of the pipes to ensure that the surface is clean, so that the flatness of the pipe surface is not affected by scratches or items placed in the pipeline.

6.After the connection, the main valve should be opened slowly to avoid the water flow suddenly hitting the water pipe and causing the water pipe to rupture or break.

The above is the method of connecting the water pipe of the wall-hung boiler, it should be noted that it must be cautious when connecting the water pipe to ensure that the connection is firm and smooth, and to prevent water leakage and damage to the furnace body. If you have any doubts or do not understand something, you should consult a professional before proceeding.

The wall-hung boiler is one of the main equipment for modern home heating, and is favored by more and more families because of its advantages of energy saving, environmental protection, safety and convenience. In the process of using the wall-hung boiler, it is very important to drain water, otherwise it may affect the normal operation of the wall-hung boiler and shorten its service life. The following is the method of draining the water pipe of the wall-hung boiler:

1.First of all, it is necessary to determine whether the wall-hung boiler is in a shutdown state, which is a prerequisite for water discharge.

2.Find the drain valve at the bottom of the wall-hung boiler, usually in the lower part of the wall-hung boiler, and some may have a dedicated drain hole.

3.Using a wrench or pliers, loosen the valve.

4.After loosening the valve, wait a few minutes for the water in the sink to flow clean.

5.When the flow of water has completely stopped, the drain valve can be closed.

6.Re-tighten the drain valve to avoid water leakage.

7.Check the pipes for water leakage or water stains, and restart the wall-hung boiler when there is no water leakage.

The above is the method of draining the water pipe of the wall-hung boiler, and you must follow this method, because the use of the wall-hung boiler is different from that of conventional household appliances, and improper use may bring safety hazards to you and your family, so it is recommended that when you are unsure, you must ask a professional to help you operate.

1. Determine the location of the tap waterBefore installing the wall-hung boiler, the first step is to determine the location of the tap water. Water pipes are usually ridged in walls or underground, so you need to find out where the water pipes are located and the size of the pipes. If the water pipe is on the wall, it needs to be exposed so that it can be connected to the wall-hung boiler.

2. Install the tap water pipe joint near the tap water pipeline, and install a joint above and below the water pipe. To connect the water pipe to the wall-hung furnace. Make sure you use the correct type of fitting to accommodate the size of your water pipe.

3. After connecting the water pipe connection joint, connect the water pipe to the wall-hung furnace and the joint. Spiral sealant is generally injected to prevent water leakage. If you use a hose to connect the water pipe, you need to fix one end of the hose on the wall-hung boiler and the other end on the joint to ensure that the water pipe is smoothly connected to the wall-hung boiler.

Fourth, test the water flow and pressureAfter connecting the water pipe, you need to test the water flow and pressure. Turn on the tap and make sure the water is unobstructed and not leaking. At the same time, observe the pressure gauge of the upper stool of the wall-hung stove to ensure that the water pressure is within the correct range.

If the water pressure is too high or too low, the pressure valve on the water pipe needs to be adjusted.

In general, the method of connecting the wall-hung boiler to the tap water is relatively simple. However, attention to detail is required when connecting water pipes to ensure that the water pipes are connected securely and without leakage. Before connecting the water pipes, make the necessary preparations and clarify the location and size of the water pipes to ensure that the correct fittings and water pipes are selected.

Finally, test the water flow and water pressure to make sure everything is working properly.