How to pave decal tiles to make the bathroom more colorful?

How to pave decal tiles to make the bathroom more colorful? Although the toilet area is small, but it is a test for many people's decoration, there is a toilet with clear water and moisture all year round, and the major families can choose ceramic tiles for decoration, but the cumbersome paving tiles, the effect and aesthetics are average. Now it is more and more popular to lay tiles in the bathroom, add new elements such as tiles and hexagonal tiles to do local decoration, which makes people shine, and the laying and matching decoration of toilet tiles will take a look at it.

<> bathroom is another comfortable area in our home, and the quality of the tile stickers directly affects the experience of ourselves and our families. Let's learn how to tile the toilet! Practicality is one of the most striking places in the toilet, generally simple and atmospheric, the color and type of tiles should not exceed 3 kinds.

Because the toilet area is small, the color of the tiles is too strong and the jump is not big, so it is recommended to choose a calm and gentle color. If it can be coordinated with the color of the sink, bathtub and tools**, it is best to avoid the color of the tile not too much contrast and avoid aesthetic fatigue on the eye.

The toilet can choose to use tiles for local decoration, which can make the whole space more administrative level and three-dimensional, but the design and decorative patterns should not be too trivial, otherwise people will be prone to visual fatigue and dizziness. Floor tiles and wall tiles of the same color is a more common means of paving, in addition, you can also try the upper and lower color paving method, in order not to appear"Lightheaded", you can choose the means of shallow upper and lower depth to cut off the connection with the waistline.

If the tile design in the toilet decoration is not good, it is also a waste, so tile paving is the key. In recent years, tile has become very popular and has been particularly loved by young people who pursue individualized art. Embossed bricks give the space more dexterity, highlighting the vitality and delicacy of the space, which can advocate bricks and can also be used as accessories.

The appearance of embossed bricks is definitely a dazzling presence, with thousands of designs, decorative patterns and colors that add interest to less vivid spaces. Ceramic tiles are not suitable for laying in large areas in home decoration, which is easy to cause visual fatigue, and is most suitable for decoration of small areas of bathrooms and kitchens. The decorative pattern design of the tiles adds a bit of fun and luxury to this dry place, and at the same time has the advantage of being easy to do.

Beauty sewing is also indispensable. After the tiles are pasted, some tile joints need to be treated. In general, they are filled with beauty sewing agents.

If you want a better effect and more convenient cleaning, it is recommended that you use beauty sewing agent, porcelain sewing agent or epoxy colored sand, and it is rich in color.

We can use the tiles in the bathroom as a whole to be more plain in color, and in the dry area we can use more colored tiles to decorate, which will make the bathroom space visually appear larger, more transparent and bright.

You can lay some patterned tiles, so that you can make the bathroom more beautiful, and you should choose reasonably according to the style of the design, so that it can be more brilliant.

You can use ink painting patterns of tiles and watercolors, or some calligraphy calligraphy and painting tiles to piece together a work, which will look more brilliant.

Of course, I know that many bathrooms will be spliced with tiles, so that the spliced bathroom will look more advanced, and it will also make the colors look richer.

In the process of installing tiles in the bathroom, try to avoid relatively small tiles, and you can install some large tiles, so that it looks neater and easier to take care of in the later stage.

I will choose some rustic style decoration, and choose some small bricks with broken flowers for decoration, which is also more beautiful.

The cement mortar used to pave the bathroom bricks is marked with No. 425 cement, and the ratio of cement and sand should not be greater than one to three. If the cement content is too heavy, the tile will crack due to the high expansion coefficient of the cement, thus reducing the service life of the tile. Bathroom tiles will soak for a long time.

If glazed tiles are used in the bathroom, cement mortar acts as a binder, the tiles need to be soaked in water and then laid. The soaking time is preferably thirty minutes, and the tiles do not blister after they are completely soaked.

When we decorate a room, we usually need a variety of decoration materials, and the decoration materials used in different parts of each room are also different. Especially when decorating walls and floors, be sure to use tiles when decorating walls. There are many types of tiles.

When choosing, you can choose the right tile to decorate your room according to the decoration style of your room. Less than one millimeter, ordinary wall tiles millimeters, antique brick gaps can be appropriately widened. The height of the bathroom wall tiles is higher than the ceiling, generally not less than ten centimeters.

Pay attention to the texture of the tile when aligning the tile to pave the tile, so that you can follow the texture. When the tile waistline has a positive and negative direction, pay attention to the direction and do not stick it down. The texture of the tile waistline is consistent with the texture of the brick.

It needs to be removed from the water and wiped off the surface for paving. Before paving, an auxiliary line is set on the wall screed to hang a vertical line, which is used to determine the size line of the tile. Then set the horizontal line to ensure that the tiles are laid horizontally and vertically and the surface is flat.

When setting up a support plate and laying tiles. It is necessary to set up a wooden board that can support the tile in a horizontal line to prevent the tile from displacing or falling off before the bond strength is reached. Pave sequentially.

Generally, the laying of floor tiles starts from doors, windows or balconies, from top to bottom, from left to right. The specific paving method is: first moisten the screed with water, then use a shovel to apply mortar or other adhesive on the back of the tile, and then paste the tile on the wall, and gently tap the tile with a shovel handle or rubber hammer to fill the space between the wall and the tile with mortar.

It is necessary to carry out the base treatment, clean all the dirt, clean the site, and then use a trolley to lay the wall first, and finally the bricks to pave.

A layer of waterproof material should be laid first, and then tiles, and then a beautiful seam can achieve a good waterproof effect.

It is a piece of shop, the bathroom is very important, must be installed, if the installation is not good, it is easy to affect yourself and others.

There is more water in the bathroom, so the general user can carry out all the tiling treatment on the sanitary home when decorating, which can not only effectively waterproof, but also ensure the appearance effect. But there are many places that can not be ignored in the bathroom tiling, first of all, we should pay more attention to the selection of materials to ensure that the specifications of the tiles are consistent with the size of the bathroom, and the construction requirements are also very strict, because the tiles of the bathroom also have a waterproof effect. The following is some experience and knowledge of bathroom tiling.

Selection of materials

Many owners choose the tiles for the bathroom only according to their own preferences. In fact, the purchase of bathroom tiles needs to be selected according to the lighting, size and humidity of the bathroom, and the quality, size and radioactive health certificate of the material need to be seen when purchasing. Choose the color and surface of the tile according to the lighting of the bathroom.

If the lighting is poor, you should choose bright glazed bricks of beige and other rotten bright colors. Glazed tiles are divided into glossy and matte: glossy glazed tiles, which are suitable for creating a "clean" effect; Matte glazed tiles, suitable for creating a "stylish" effect.

Preparation for construction

When tiling tiles, the fit of the tile to the wall is greater than the gravity generated by itself. Because the tile itself has many small holes and strong water absorption, the dry tile will absorb the moisture of the cement, reducing its fit, and it is easy to hollow and fall off after paving. Therefore, the tiles must be soaked for 24 hours until there are no blisters, and then they must be dried before being paved.

Construction technology

When tiling and plaving, the humidity of cement mortar should be well controlled, too dry or too wet will affect the adhesion between the tile and the wall. Cement mortar needs to be evenly and fully applied behind the tiles, avoiding only the surrounding areas. After the tile is attached to the wall, it is necessary to use a rubber hammer to knock it down, and at the same time to check the tile application, add or reduce cement in time, this process needs to be repeated over the acres until the tile and the wall are evenly fitted.

Because the newly laid tiles, the cement is not completely dry and solidified, and it is easy to sink under the influence of gravity. Therefore, after the tiles are pasted on the wall, a certain gap must be reserved between the upper and lower tiles. If the retained gap is too small, it is easy to squeeze the glaze during thermal expansion and contraction, reducing the service life of the tile.

Post-protection

After the tiles are paved, some follow-up works will be carried out, in order to avoid scratching the tiles during the construction, the tiles must be protected after the wall paving is completed. Packing boxes can be placed on the tiles under the walls to avoid touching the brick surface when moving bathroom appliances and construction tools.

At present, bathroom tiles are generally set of tiles, there are many colors and types, and the color must not be too bright when choosing, and it is best to coordinate with the overall style. It is recommended to use lighter colors to create a clean and comfortable environment. Bathroom bricks need to be soaked in water before laying, so as not to absorb the moisture in the cement mixture and cause the tiles to fall off.

You can get it for free

The flower tiles of the bathroom should be pasted against each other, as shown below

3.When pasting bathroom tiles, first on the flat ground will be pasted in advance of the flower tiles for splicing, so that several small flower tiles are spliced into a large flower decoration (as shown in the picture above) and then attached, in addition to the paste of this kind of flower tiles to be careful to prevent breaking and breaking, affecting the pasting.

The back of the toilet is good-looking, we also paved it like this, the designer designed a centralized plan, and finally felt that the back of the toilet is better than other places.

The bathroom is a very special place that everyone can use in their daily lives. In home renovation, how to makeBathroom wall tile effectBetter is an important issue. Here's what it takesBathroom wall tile effect, tips for tiling.

1. The cement bricks for laying bathroom wall tiles can be made of pure cement 1:2 and spun yarn. When laying bricks, the ash on the back of the brick should be full, and after laying it should be pat it with a rubber hammer.

2. When the cement is not cured after laying the wall tiles, it must be protected. It should not be subjected to gravity to prevent high and low dislocations.

3. Pop up the vertical and horizontal reference lines, which are required to be at an angle of 90 degrees or 45 degrees to the door frame. Remove floor tiles that do not meet the quality requirements, such as large color difference, cracks, missing corners, glaze damage, warping, etc.

4. Every time a row of tiles is laid, check the vertical line, horizontal straightness and surface flatness with a ruler or straight line.

1. How to paste toilet wall tiles There is a more commonly used method of cement mortar method, which is suitable for home decoration in general, and most of the current home decoration uses this method, which is affordable and easy to use, and is suitable for most families.

2. Thin paste method, in this way, you need to do some leveling treatment on the wall, because the construction cost of using adhesive is very high, mainly to lay some special tiles (water absorption is less than ceramic tiles) When the wall tiles, the thin paste method will be used, so as to better control the firmness of the bonding.

Bonding, this method of pasting is only used for tile showroom decoration display, not suitable for home decoration.

Note: There will be a lot of powder on the back of the new tile and it must be cleaned before laying. The tiles also need to be fully soaked before they are laid, for at least 2 hours before they are laid, and they also need to be pre-laid.

The above is forBathroom wall tile effect, Tiling tips, choose the right method to use it early, and decorate your toilet!

You can get it for free

The bathroom is a very important place in home decoration, many owners will decorate the bathroom, will put wall tiles on the wall, on the one hand, it can increase the overall appearance of the bathroom, on the other hand, it is easy for us to clean and clean daily. However, since many people are decorating for the first time, they do not know much about the methods and precautions for paving bathroom wall tiles.

Bathroom wall tile paving method.

1. Clean up. The bathroom wall should be cleaned up before construction, and the wall should be approved with a mud knife first, and then leveled with cement slurry to prevent the hollowing phenomenon after the tile is pasted.

2. Height. Exhaust fans will be placed in the bathroom, installation ceilings, etc., so special attention should be paid to the height, followed by the size of wall tiles and floor tiles to correspond to each other, can not be too different, and finally according to the height, size and overall effect to determine the paving method, if you agree that the wall tiles are different, large size tiles from the bottom to the top, small size from the top to the bottom.

3. Ingredients. Add the water to the powdered binder one by one, and mix it according to a certain proportion on the instructions. Stir and mix the binder slurry until it is lubricated evenly and there is no obvious lump or paste knot, and let the construction slurry stand for 5-10 minutes after stirring, and then stir slightly for 1-2 minutes, and it can be used.

4. Leave seams. Scrape the freshly stirred adhesive slurry evenly onto the wall, so that the slurry is in full contact with the back of the tile. Adjust the size of the joints according to the size of the tiles, and reserve the corresponding size of the gap between the bricks for caulking.

You can fix it with a toothpick, etc. Use a professional measuring instrument to check the flatness of the tiles after pasting. After the installation is completed, it can be protected with a film.

Precautions for tile paving.

1. Many people know that the tiles must be soaked in water before paving, and the tiles that need to be paved are generally soaked in water for about half an hour, so that the tiles are easy to bond with the cement after fully absorbing the water, and the wall is more firmly back.

2. Before tiling and paving, be sure to check the wall to see if there are cracks that need to be repaired.

3. When tiling and paving, we must choose the correct cement number and mix the cement sand, the higher the cement ratio, the stronger the tile adhesion, but the high proportion of cement mixture will lead to the increase of the expansion coefficient of cement mortar, which is easy to cause the brick to crack after tile paving.