The laptop hasn t been used for a while, and now it s charging but won t turn on. Is the indicator o

If you can't enter the system normally after booting up, it is usually due to system damage and you need to use a disc or USB flash drive to reinstall the system.

Small white U disk system preparation tool:

1. One-click reinstallation of the tool.

2. A USB flash drive larger than 8G (it is recommended to back up the important data of the USB flash drive first) 3. A computer with normal Internet access.

Detailed steps of the small white U tray system:

1. Insert the USB flash drive into a computer that can access the Internet, open Xiaobai and reinstall the system software with one click.

2. Wait for the software to complete the detection and click on the production system on the left.

3. The software will automatically recognize the USB flash drive letter, and the production mode is just default, click to start production.

4. Select the system that needs to be installed, Xiaobai software supports x86-64-bit system installation, pay attention to the number of system bits when choosing, and start making after selection.

5. The prompt window for formatting the USB flash drive appears, if the USB flash drive data is backed up, click OK.

<>8. After the U disk startup disk is made, a successful prompt will appear, click Cancel.

9. Then we click on the shortcut key to check the start hotkey that will be used later.

11. Exit the USB flash drive and install it on the computer that needs to reinstall the system.

12. Immediately after pressing the boot button, click the USB flash drive boot hotkey, the boot selection interface appears, select the USB disk option, and press enter.

13. Enter the PE selection interface, use the up and down arrow keys, select the first item, and click Enter. <>

15. Install it on the C drive of the system disk, and then click Start Installation in the lower left corner.

16. Click OK in the prompt window.

17. Then wait for the installation of the system to <>

18. After the installation is completed, unplug the USB flash drive, click Restart Now<> 19. After waiting for the optimization settings of the system, you can use it when you enter the system desktop (Note: There will be several computer restarts during the period, no need to worry, let alone other operations).

The above is the method of installing the system on the USB flash drive, I hope it can help you.

1) Please plug and unplug the adapter and battery. (If the battery is not removable, just plug and unplug the adapter) 2) Please press and hold the power button for about 10 seconds, this will clear the static electricity on the motherboard.

3) After that, please plug the battery and adapter into the laptop and press the power button to power on.

If the situation is still the same, you can go to the official ASUS service center for testing.

ASUS's official after-sales service center can be found on the official website in the following sections:

Remove the battery, connect only the external power supply, and try it on; Disconnect the power supply, disassemble the computer, and reinstall the memory module. Send it to an after-sales repair station for testing.

Laptop charging refers to the orange light of the Nafan defense light does not turn on, in this case there may be a problem with the hardware, try to re-plug the memory module first, and go to the after-sales service to check the quality of the hardware. Ultra-portable laptops: These laptops are lighter, thinner and easier to carry than ordinary thin and light models, and can even be put in a carry-on bag.

Orange indicates that it is charging, or try to turn on the battery after charging for a few minutes, and the battery is too low to turn on.

The high temperature in the state of full load of notebook performance generally occurs when playing games, and the built-in heat dissipation of some notebooks cannot meet the requirements, and the damage to the battery is very serious after long-term overheating. If it is a business laptop or a thin and light laptop, you should still avoid playing too many games, and you should choose a gaming laptop to play games.

Try not to let the battery run out completely, some batteries have a management chip inside, in order to avoid accidents with the battery, the battery will lock when the battery is depleted. At this point, it's hard to turn it on again.

1. Check whether all the plugs of the power supply and the wires on the adapter of the notebook are firmly inserted into their respective sockets, if not, it means that the contact with the power supply is poor, just press the plug down again.

2. If the indicator light is not yet on, the power adapter is being excluded.

The premise of bad is that there must be a problem with the power chip of the motherboard or a problem with a short-circuit breakpoint, and the motherboard is not powered on.

3. If the indicator light reacts, it just goes black.

Yes, this may be a problem with the graphics card or memory.

4. There is no display when the boot is normal, check whether the power cable, switch, and data cable of the display are correct, and it is also possible that the display is damaged.

That's your laptop full, and the one you're talking about should be a breathing light. But if you are still not at ease, it is recommended that you go to the after-sales service to check it.

If you say that the charging indicator on the computer is the light, it means that there is a problem with the charging interface. If you say the indicator light on the charger, it means that there is a short circuit inside the computer.

The computer battery battery is fully charged. So plug in the charger and the charging indicator will go off.

If the laptop charging indicator turns orange or flashes intermittently, the current battery is low, and if you need to continue using the computer, you need to connect the power adapter as soon as possible.

Many notebooks will have the problem of battery life plummeting after using it for a period of time, and a very small number of notebooks will also have the battery not charging at all, and the power will be turned off and shut down as soon as the power cord is unplugged.

Like smartphones, laptop batteries are consumables. First of all, almost all notebooks now are basically lithium batteries or lithium-ion batteries. The old laptop battery is detachable, and the new laptop battery is built-in.

Take win10 as an example, the solution to the laptop display power has been turned on but not charged is actually relatively simple, the following is a detailed introduction to the reasons and solutions for the laptop display power has been turned on but not charged, as follows:

1. It may be that the power supply is not responding.

Solution: You can unplug and reconnect the power supply, and if the battery can be removed, then remove the battery and reinstall it.

2. It may be that the computer is stuck and does not display charging.

Solution: You can restart your computer and try to charge it again, or upgrade your computer's system.

3. The laptop's battery is damaged, causing the computer to connect to an external power supply instead of directly using the power in the battery.

Solution: It is recommended to contact the after-sales service for maintenance.

4. It may be that the battery is set incorrectly, some laptops can be set to start charging when the power level is lower than a certain value, so it will not charge when the power level is not lower than that value.

Solution: You can modify it, right-click the battery icon in the lower right corner of the computer, select "Power Options", click "Change Plan Settings", select "Change Advanced Power Settings", and click "Battery" - "Low Battery Level" to set it.

The notebook charging indicator light is not lit Sometimes, the notebook charging indicator light is not lit, what is going on? I didn't know much about it before, but I slowly understood it after checking the information, so I'll tell you what to do! The notebook charging finger light is not on, solution analysis:

1, 10,000 meters check whether the socket is normal, whether the power supply voltage is 220VIf the mains voltage is abnormal, it is recommended to replace it for environmental testing. 2. Check whether the output voltage and current of the power adapter are consistent with the label.

If the gap is normal and the mains voltage is normal, it can be judged that the power adapter is faulty and the laptop power adapter needs to be replaced. 3. If the above checks are normal, remove the laptop battery and do not connect an external adapter. Press and hold the power on/off button for 5 seconds and repeat 3 times.

After releasing the residual charge of the notebook, plug in the power adapter separately and power on for testing. 4. If the fault persists, check whether the power connection of the notebook is abnormal. For example, looseness or cosmetic damage.

5. The above checks are normal, and basically it can be preliminarily judged that the notebook motherboard is faulty. Generally speaking, many computer brands such as Dell, Lenovo, Sony, etc., will equip their notebooks with power management software, if a certain "battery protection mode" is enabled, the power management software will prohibit battery charging and discharging after detecting the AC power supply in the household, so as to extend the life of the battery. So, if you find that your laptop is not charging, you can go to the relevant power management software, turn off the battery protection mode or check the disable charging option, and if there is no problem with the hardware, the battery will be able to charge.

2. The hardware has a problem with the hardware failure of the battery, generally speaking, we can make the restart of the computer, reinsert the battery to judge, if the battery is still charging, you may wish to install some hardware detection should be installed, and obtain the general battery loss reference information. If it is determined that the battery hardware is faulty, do not open it or try to repair it, there is a certain risk, it is recommended to take it for repair. 3. Security repair method:

When the computer boots into the BIOS, usually find the "Start Battery Calibration" option in the power item, that is, "Start battery repair", generally speaking, it will first remind the user to connect the power adapter to fully charge, and then the user will be shown to disconnect the AC power supply, the win7 system will continue to discharge the notebook and the direct power will be completely exhausted, and then the notebook will turn off, we can connect the power adapter to charge, but do not turn on, wait for the charging finger Once the lights are off, the whole process is complete. Note: The battery repair process for the BIOS may take up to 5 hours, so be sure to do it when you don't need to use the laptop.