What is the standard for the height of a range hood from the ground?

Generally, the height of the range hood is installed directly above the stove and on the same axis of the cooker, and the left, front and rear positions should be kept horizontal, and the distance from the bottom end of the range hood to the cooktop should be 650 750mm (the side suction machine can be appropriately reduced (200 400mm), which should be determined according to the specific use).

The range hood should not be installed in a place with large air convection, and the approximate position can be drawn on the wall with a pencil when installing.

Range hood ground clearance:

1.The distance between the bottom of the smoke machine and the stove is not less than 650mm, and the general table height is 800-1000mm, in the absence of specific requirements, in accordance with the ergonomic standard;

2.The normal installation height is 350mm to 400mm from the bottom of the hood and the top of the stove.

3.The Chinese deep machine with a smoke hood can be installed higher, the one without a smoke hood can be installed lower, the one with large power can be installed higher, and the one with small power can be installed lower.

Turn left|Turn right.

It is more suitable for the range hood to be more than 650mm from the ground.

1. The power socket of the range hood must use a special socket with a reliable ground wire;

2. Install the range hood according to the instructions, the general installation height should not be less than 650mm, and install it directly above the stove as much as possible;

3. The range hood should be turned on for 1-2 minutes before cooking to obtain a better effect of removing the oil smoke;

4. When replacing the bulb, the power should not exceed the maximum value near the lamp holder and on the manual, otherwise, the temperature rise of the wire connecting the lamp holder and the lamp holder will be too high, accelerate the aging of the wire insulation layer, cause the potential danger of electric shock, and even lead to fire.

Different types of range hoods have different installation height standards:Installation height of side suction range hood The installation height of the side suction range hood is appropriate to ensure the effect of range hood; The normal installation height is 350mm to 400mm from the bottom of the hood and the top of the stove.

The installation height of the European range hood is 650mm to 750mm from the bottom of the European range hood to the reference height of the stove countertop.

Attention to the use of range hoods:

Many users turn off the range hood immediately when cooking, which does not play its role, the correct way to use it is to turn it on as long as the cooking is started, until the whole cooking is over and then turned off after 5 or 6 minutes. In this way, the residual harmful gases in the kitchen can be discharged to the greatest extent and prevent them from remaining in the kitchen, so as to prevent harm to human health.

When using the range hood, do not directly let the range hood face the burning gas stove, if you need to hold the pot, turn off the gas as soon as possible, beware of being adsorbed by the range hood by the flames, and prevent the occurrence of fire.

The standard chain spike of the height of the range hood from the ground is: the air outlet of the range hood should be at least 60 cm from the ground, and the distance between the air outlet and the state wall should not be less than 60 cm.

The range hood is a must-have appliance in the kitchen, and you need to pay attention to its height when installing it. So, what is the standard for the installation height of the range hood?

1. Chinese range hood: the installation height should be 65 cm to 75 cm away from the table, not too high or too low. Because it is too low, it is easy to meet, and too high will affect the use effect.

2. Top suction range hood: the installation height needs to be 70 cm to 75 cm away from the table, and the specific installation position of the gusset plate should be selected according to its specific size, and the corresponding marks should be made.

3. European-style range hood: the installation height needs to be 65 cm to 75 cm from the table, which can be selected according to its power.

4. Side-draft range hood: the installation height needs to be 35 cm to 40 cm from the countertop, starting from its bottom, and the position needs to be directly above the stove, and the two need to be on the same axis, so as to achieve the corresponding effect.

What to pay attention to when installing a range hood.

1. Determine the installation location.

As we all know, range hoods are installed directly above the stove, because this position can be produced in the shortest possible time to produce the smoke at the fastest speed, especially for the top suction range hood, this position is very important, and the distance between the position and the stove should be controlled, not too far or too close, otherwise it will affect the effect of use.

2. Pay attention to the installation of flue.

When installing the range hood, it is also necessary to pay attention to the installation of the flue, there is a connection between it and the range hood, and this part must be firm, otherwise in the process of use, it is easy to have poor smoke or smoke leakage. After installation, check how secure it is.

Article summary: The above is all about the standard of the installation height of the range hood and what to pay attention to when installing the range hood, I hope it will be helpful to you. If you want to know more about it, please stay tuned to Qeeka Home.

Different types of range hoods have different installation height standards:

1. The installation height of the side suction range hood.

The installation height of the side range hood is appropriate to ensure the effect of the range hood; The normal installation height is 350mm to 400mm from the bottom of the hood and the top of the stove.

2. The installation height of the European-style range hood.

The bottom of the European range hood is 650mm to 750mm from the reference height of the cooktop installation.

3. The installation height of the top-suction range hood.

For top-suction (European-style) range hoods, the distance is generally 700mm to 750 mm from the table.

650-700 mm range.

The installation height of the range hood must be sufficient. Usually the height of the up-suction type is 70 cm, which guarantees the effect of the range hood without touching the head. In general, the range of 650-700 mm along the outer edge of the range hood can also be determined based on the following overall situation, but in general, the height of the range hood should not be very high.

Then the Chinese deep range hood with the hood can be installed in a higher position, and the Chinese style range hood without a hood can be installed in a lower position; Higher power can be installed, lower power can be installed; Application: Ordinary chimneys can be installed underneath, and uncommon chimneys can be installed above.

Precautions for range hood installation:

1. The gas discharged from the range hood should not be discharged into the flue used to discharge the smoke used for burning gas or other fuels.

2. Before the installation of the range hood, it must be sure that there is no water pipe, gas pipe and wire in the perforated part.

3. During the installation of the range hood, we must pay attention to the level of the body to ensure reliable and safe grounding, and the grounding point should be kept away from flammable and explosive materials.

4. Before the installation of the range hood, the height of the customer's installation range hood (the distance between the gusset plate and the cooktop table) must be measured, and then the installation height of the range hood must be determined.

The height of a Chinese-style range hood is generally 650 mm to 750 mm from the countertop. The top-suction (European-style) range hood is generally installed above the stove, and the smoke is sucked away through the exhaust fan, and the smoke exhaust effect is more direct and effective. However, it is not always better to be closer to the countertop, and it is generally more suitable to be 700 mm to 750 mm away from the countertop.

The height of the bottom of the European range hood from the installation of the cooktop is in the range of 650 mm to 750 mm, and the range hood with a larger power can be installed higher, on the contrary, the lower power is installed with a lower power.

1. The installation height of the traditional range hood is generally about 700mm.

2. The de-exhaust range hood should be installed directly above the exhaust gas, and the height is 650 700mm.

Answer: Side-draft range hoods are usually 200 400mm away from the cooktop, European-style range hoods are usually 650 750mm away from the cooktop, and top-suction range hoods are usually 700 750mm away from the cooktop. The details are as follows:

The installation height of the range hood refers to the distance from the bottom end of the range hood to the stove, and the range hood is generally 650 750mm away from the stove. Different types of range hoods have different installation height standards:The height of the side-draft range hood can be appropriately reduced a little, usually 200 400mm.

The installation height of the bottom of the European range hood from the cooktop table is usually 650 750mm, and the height of the top suction (European) range hood is generally 700 750mm from the countertop. The specific installation height of the range hood should be determined according to the specific use.

1 The height of the range hood is determined by the type of range hood, and the height required for different types is different.

Generally, the height of the bottom of the range hood from the cooktop is 6 5 7 5 cm .

The top suction type is generally 70cm, in which the Chinese-style deep range hood with a smoke hood can be installed higher, and the European-style range hood without a smoke hood can be installed lower; Near-suction type is 25-35cm;

In short, the installation height of the range hood should be low and not high.

2. Determine the height of the range hood and wall cabinet according to the height of the operating table, so that the decorated kitchen will be handy to use.

3 Other precautions for the installation and design of the range hood:

1) The power supply, voltage and frequency should be consistent with the provisions on the nameplate of the electrical appliance, and there should be good grounding protection;

The distance between the position of the power socket and the position of the power cord machine shall not be exceeded.

2) The air outlet pipe should not be too long, not more than 3 m, and the length of the air outlet pipe with random matching is about m.

3) The direction of the air outlet pipe should be smooth, and there should be no too many turns, otherwise it will affect the smoke exhaust effect.

4) When installing the smoke pipe, in order to strengthen the smoke pipe to prevent it from falling off, 2 3 self-tapping screws will be screwed outside the air outlet of the smoke machine to fix the smoke pipe.

When screwing, it is necessary not to be too deep, so that the screw can just penetrate the air duct, and if it is screwed too deeply, it will block the blades of the check valve, so that the smoke machine cannot open the check valve blades when working, resulting in a large reduction in suction or no suction.

The installation height standards of different types of range hoods are different: 1. The installation height of the side range hood is appropriate to ensure the effect of range hood; The normal installation height is 350mm to 400mm from the bottom of the hood and the top of the stove. 2. The bottom of the European-style range hood is 650mm from the reference height of the stove table to the top-suction (European-style) range hood, and the separation degree is generally 700mm to 750 mm from the table.

The bottom of the European range hood is 650mm to 750mm from the reference height of the stove countertop installationThe reference height of the bottom of the near-suction range hood from the cooktop is 350mm to 450mm

What should I pay attention to when installing a range hood?

1. The installation position of different kitchen range hoods.

According to the installation position, the kitchen range hood can be divided into three categories: top suction, side suction and bottom suction, which are located above, side and below the stove. The downdraft kitchen range hood installed below is relatively rare and the installation is relatively simple, so we won't talk about it here. The main focus is on the position of the top suction and side suction kitchen hoods relative to the cooktop.

Considering the convenience of operation and smoking effect, the height of the top suction kitchen hood from the stove is generally between 65-75cmThe bottom of the side-draft kitchen hood can be closer to the stove, generally between 35-45cm.

Both top-draft and side-draft kitchen hoods should be installed horizontally directly above the cooktop, and the vertical central axis of the kitchen hood should overlap with the cooktop centerline.

2. Do not install in places with strong air convection.

When reserving the installation position of the kitchen range hood, it is necessary to consider that the kitchen range hood cannot be installed close to doors and windows and other places with strong air convection, so as not to affect the smoking effect. Because if the air convection is too large, the oil smoke will already diffuse a lot before it rises to the effective suction range of 25cm.

3. Requirements for installing walls.

Do not install the kitchen hood on the wall of wood or other flammable materials;In addition, the smoke machine must be fixed directly to the wall. And the wall must be a load-bearing wall, and must not be fixed on the cabinet.

4. The order of installation with the cabinet.

Generally speaking, before the cabinet design, the style and size of the kitchen range hood need to be given to the cabinet manufacturer to reserve the position of the kitchen range hood. The order of kitchen hood and cabinet installation is mainly based on the specific situation of different people. Generally, if the kitchen hood and the cabinet are relatively close, it is better to install the cabinet first, otherwise it is easy to damage the kitchen hood.

However, it is better to arrange the installation of the two on the same day, and the installation is more effective.

5. Preparation before the installation of the kitchen range hood.

Before the formal installation of the kitchen range hood, it is best to make the following preparations to facilitate the installation of the kitchen range hood.

Reserve the kitchen range hood socket: the location of the kitchen range hood socket should be planned in the water and electricity renovation, generally because the power cord of the kitchen range hood is generally only one meter long, so the socket is often installed 80 cm above the kitchen range hood.

Reserve the exhaust outlet: The size of the exhaust outlet of the kitchen range hood should be played according to the size of the exhaust pipe of the product. The smoke exhaust outlet should have a large diameter at the outer mouth and a small diameter at the inner mouth to prevent rainwater from backing up.