When there are beams and columns in the space during the decoration, what methods can be used to tra

You can wrap the beams and columns with some wooden board materials, or you can use paint to read them into very beautiful colors, or you can wrap some beautiful flowers, or you can make some decorations, or you can carve some very beautiful patterns on them, which are very good.

We can wrap these ugly beams and columns, or make them into semi-arc shapes, which can be used to partition the space, can be made into decorative columns, and can also be made into cabinets, which must be used reasonably, so that we can increase the storage space.

You can choose to do some carvings on the beam to improve the overall effect of the beam and column, play a decorative role, you can choose to place some large flower pots on the side of the beam and column to raise some relatively tall plants, and you can choose to hang a few paintings to improve the overall taste.

You can wrap the top beam in a wooden plank, and then paste the beautiful wallpaper, and hang the light strip, so that it can be hidden, which is very beautiful.

You can wrap it in trembling wallpaper, you can use it as a decoration, you can make a cabinet before infiltrating to wrap it, you can also hide it in the wardrobe, and you can build a group of cabinets next to it.

When decorating, no matter at any time, you can't remove the load-bearing beams and columns for the sake of beauty! There are many kinds of structures of houses, among which walls, columns, and beams are the most common, and girders play an important role. If there is a problem with the beams and columns of the house, it will affect the overall safety of the house.

Therefore, the state has clear regulations that it is forbidden to remove beams and columns during decoration.

At the beginning of the renovation process, the property will make it clear that the removal of the beams and columns is not allowed, and the relevant agreement will be signed. At the same time, the property will be inspected by building management personnel on a daily basis. If found, stop the demolition of the beams and columns immediately.

If the circumstances are serious, it will be reported to the superiors. As upstairs and downstairs neighbors, during the renovation process, if someone is found to have demolished the beams and columns, they will stop it and report it to the property and relevant departments, because everyone knows that this kind of behavior is serious and wrong, and it will have an impact on the structure of the house and seriously affect the safety of the building. So, any construction like this can be stopped.

If the beam is attached to some wall, the wall can only be knocked underneath the beam. For example, the wall between the bedroom and the study needs to be knocked out at this construction site, but there are beams on the wall, so it cannot be moved here, otherwise there will be safety hazards. Changing the structure of the house and tearing down the wall will affect the structural safety of the house if you are not careful.

If the owner is carrying out structural renovation of the house, he needs to check the architectural structural design drawings to see which are load-bearing walls, and consult relevant professionals before starting construction. It is emphasized that after the wall was demolished, the restoration work could not be saved.

The beams play a supporting role throughout the house, not a "decoration" role, don't just take them off. If you can't knock on the beam, try not to knock it. If you have to knock it out, you have to see if you can do it again.

Don't play with your own life and the lives of others! If you don't like the "hidden" decoration of beams, maybe you will find that beams become "auxiliary" to decoration! Finally, even if the content design of the house is not reasonable, you can ask the designer to tailor the design and renovation, but you can't have the idea of moving the beams and columns.

You have to strictly enforce the relevant regulations to decorate it, otherwise the consequences will definitely make it regret it for life!

"When decorating, you can't remove the load-bearing beams and columns for the sake of aesthetics at any time!"

I don't think it's okay to tear down some of the beams and columns for aesthetic reasons, because some of them may be load-bearing, and if you remove them, there will be safety hazards.

When decorating, the beams and columns cannot be removed, because the beams and columns play a load-bearing role, and the property will not agree to demolish, if it must be demolished, an agreement must be signed, and the consequences will be borne if there is a problem.

The use of unsmashable beams and columns is the most perfect, which tests the designer's ability。Beams and columns to see the specific position, the appropriate position can be hidden by the ceiling, when measuring the room must measure the height and width of the beam, if in the middle of the dining room, the position is more awkward, it will be a few more horizontal and vertical beams, and the original beam to form a tic-tac-toe or nine-square grid shape, decorate each space with gypsum lines, or wrap up the decoration with pine sylvestris, the effect will not be bad, but let you surprise!

When decorating at home, you will choose to make the two functional areas into a space, although it will look more spacious in space, but there will be a large beam in the middle, the big beam and the load-bearing wall can not be punched, let alone demolished, it is very unsightly, it seems a little chicken, I will share with you, how to deal with these large beams?

First, the partition function

Installing sliding doors: Installing sliding doors under beams can divide two different spaces.

Make a bookcase: cut off the functional area of the study.

Install columns: The beams in the living room can be installed with columns to divide the space reasonably.

Second, from the aesthetic point of view

Pass: In the living room, kitchen, dining room, these three functional areas, the existence of large beams can make the functional area very clear, can be decorated into the shape of the pass, the sense of space is expanded, and the decoration is strong.

Hang lights on the beams: Turn the beams into light stands and hang them with decorative lights.

Finally, in addition to the above methods, there is also a way to compare that the beam can be made through the ceiling, so that the beam does not look too abrupt in the space.

Partial ceiling: make a ceiling on one side of the living room to weaken the presence of beams.

Full Ceiling: Ceiling all around the room, so that the beams and ceiling become a whole.

Third, from the functional point of view

Install the air conditioner: Make pipes on the beam, and the air conditioner can be installed on it.

Video wall: Hang the TV and the TV wall on the big beam, ignoring the abruptness of the big beam, but it is still very designed.

If there is a big beam in the house, but you don't know how to take it, you can use some of the methods I summarized above, so that chicken ribs and abruptness become a useful part of the home

We should add some decoration to the beams and columns, and we should change the material of PVC, so that it will be more perfect.

This kind of beam owner can paste some good-looking wallpapers, so that you can see beautiful wallpapers when you look up.

Decoration in the beam is inevitable, play a role in supporting the house frame, bearing weight, in the overall design of the beam is also the focus and difficulty of the roof design of the house, the beam must exist, how to deal with it is particularly important 1The simplest way, according to the height and width of the ceiling when the ceiling is carried out, the beam is effectively hidden, made in the ceiling, not exposed to become a part of the ceiling, so that the beam is hidden and the top surface is modified, to achieve the beautiful and overall effect, only the effect of the ceiling drop, out of the sense of hierarchy and then auxiliary built-in lamp, the effect of the spotlight is better, so that the whole space is full of interest. 2.

If the space beam is more and the depth is higher, should not be hidden, will create the effect of the lower ceiling of the space suppression, according to its original form, according to the situation, auxiliary lighting and the construction of false beams to make the top surface staggered, the original beam and the false beam set off each other, enrich the top modeling, can also come out of another decorative effect 3The use of translucent materials for packaging, not so heavy, the top light or wallpaper and special materials decoration, look unified and transparent, original, combined with the wall and ground, the style is unified, so that the space integration is also a good choice.

Don't make a fuss, beauty isn't like that!

Generally, beams and columns are set in key parts, and when designing buildings, designers will also consider practical and beautiful. There is only one possibility: the existing functions are not enough, and a part of the space is renovated to increase practicality, if it is only for the sake of aesthetics, it is impossible to move the beams and columns!

All changes to the beams and columns for the sake of beauty are hooligans!

No matter how you toss, the load-bearing, earthquake-resistant, and load-bearing of the house cannot be changed, which is the bottom line of house renovation! No matter how good the reason. Besides, it's unlikely that the beams and columns will have much of an impactIf a designer is only for aesthetic considerations, and is not able to deal with the impact of beams and columns on aesthetics, it can only be said that you have found a parallel designer, and two knives are not counted!

The change of beams and columns does not increase the spatial change.

OnlyFor a house, even if the beams and columns can be properly moved, it should not bring much help to your spaceAfter all, you can't just tear it down, right? It's like a person has his spine removed, do you think it's still safe? It would be too ruthless if that were the case!

Beams and columns do not affect the aesthetics.

If you have one enoughA good designer definitely has the power to turn decay into magic, and imperfect beams and pillars can be handled just right. The means of embroidering on the iron plate is a necessary quality of a good designer, not to pave the house and do nonsense on it.

At the beginning of the decoration construction procedures, the property will clearly inform that the beams and columns are not allowed, and the relevant agreements must be signed, and the property will have a building management to conduct daily inspections, if it is found that the construction of the beams and columns will be stopped immediately, and the circumstances will be reported to the higher level. As a downstairs neighbor in the renovation process, if someone is found to remove the beams and columns, they will also stop it, and report it to the property and relevant departments, because everyone knows that this behavior is seriously wrong, has an impact on the structure of the house, and seriously affects the safety of the building, so you can stop it when you see such construction.

Finally, I want to say here that even if the content design of the house is unreasonable, then you can ask the designer to tailor the design, but you can't have the idea of moving the beams and columns, and you must strictly implement the relevant regulations to decorate, otherwise the consequences will make you regret it for life!

1. Don't move the non-load-bearing wall easily.

Danger Index: 9 Hit Index: 8 Although the non-load-bearing wall is a secondary load-bearing component of the house, it is also an extremely important support for the load-bearing wall. Whether the non-load-bearing wall can be removed depends on the situation, if the whole building is demolished and modified at will, the seismic resistance of the building will be greatly reduced.

Beams and columns cannot be removed, because the beams and columns in the interior are basically load-bearing walls, which may form a danger once they are removed, and some walls that are not load-bearing walls can be removed.

No, beams and columns are important structures that support the house and are important fulcrums of the house. If some of the beams and columns are removed for aesthetic reasons, it may pose a safety hazard of collapse.

Liang Duo is indeed related to the decoration effect in the future.

But there are many beams, and how to deal with them depends on the layout of the house.

As long as the layout drawing is done, the beam above is ready to be done.

Generally speaking: the beams on the sofa, dining table, bed, etc. must be hidden, which is related to the future girder pressing.

It is best to do a hierarchical treatment of the beam, such as taking the beam as the center line, and the ceilings on both sides of the beam are not at the same height.

There are many materials for the ceiling, and different materials have a good effect on the hidden ceiling of the house, and the material of the ceiling can be selected according to the specific needs.