Is it better to lay floor tiles dry or wet? What do you need to choose between dry or wet tiles?

Wood grain floor tiles are a kind of clay floor tiles, which have a certain ability to absorb water, so they are mainly soaked for about 1 hour in advance to avoid cracking; Dry paving is generally 1:3 concrete sand sprinkled with water mixingThe dry humidity level is about hand kneading and clumping is not loose, and there is a certain market demand for the thin thickness of the mud spread by dry paving, so there will be more materials, and the difficulty coefficient of paving will be relatively large, so the cost will be higher than that of wet paving. The behavior of wet paving is very simple, and the concrete sand follows 2:

The amount of 1 is thinned with water, glued to the ground, and then leveled on the ground, and when it is completely done, it can be trampled. Compared with wet paving, dry paving is more efficient, and it will also have a stronger grasp of the leveling of the road surface, and after paving, it is not easy to move casually. Because the mud under the wet wooden floor is more watery.

Therefore, it is relatively slippery, not easy to fix, and uneven force or accidental contact will endanger its flatness. Dry-laid floor tiles are not very easy to have gas and bubbles mixed in because the mud is relatively dry, and it is easy to cause bubbles when the moisture is large, and there will be many small round holes after being done, so it may be easy to cause the wooden floor to loosen and the wall to be hollow. Toilets and living balconies are best wet paving, because dry mud may occur moisture absorption and water storage, if you want to wood grain floor tile wall must also apply wet paving practice, because wood grain floor tiles have a certain net weight, must be relatively strong adhesion.

Nowadays, most of the floor tiles are dry-paved, but the dry-paved is not without water, but manipulates the water to a certain amount.

I think that adding water to the sand will clump lightly, and it is best to take a meter high floor type to disperse, wet paving is not recommended, a flatness is not easy to manipulate, a gap is not very good to align at both ends, and there is a period of time to get rid of floor tiles and wet paved mortar, many of these paving water and land methods will rise. Old house maintenance, wet paving is generally thinner, can not occupy a lot of indoor space, but it is easy to deform after paving, if you want to make the bricks look good and not go out of shape, it is best to dry paving, dry paving The actual effect is better, although it will occupy a certain amount of indoor space, it must be about 4 points of thinness, in addition, if you want to pave bricks, whether it is wet or dry, you need to find a good master of bricks.

Don't look for work on the street, floor tiles are the necessary raw materials for home decoration, its quality determines the application comfort and future use period, but its quality is not the only determining element, before installation, floor tiles can be said to be semi-finished product processing, only after the installation is completed, it is considered a finished product, so the installation technology of workers determines the service life of floor tiles to a certain extent. The feature of wet floor tiles is that they are easy to use, saving time and effort! The disadvantages are also more significant, if the large-scale paving is used this method,The neat level of paving cannot be controlled, and in some ways, wet floor tiles are more likely to produce product quality problems such as wall hollowing and warping!

Wall tiles are generally laid by wet floor tiles, and particularly large size floor tiles will be laid by dry floor tiles, for example, the floor can be laid with 800 800 large tiles or large-size stones.

Of course, you should choose the dry paving method. It is necessary to choose according to the environment of the home, according to the quality of the floor, according to the material of the home, according to the condition of the soil, and also according to the condition of the sand.

It is better to lay wet when laying floor tiles; First of all, it is necessary to choose according to the flatness of the ground and the humidity of the room, and the lighting and ventilation intensity, and also choose different floor tiles according to the overall decoration style.

Many families don't know anything about renovation, and there are pitfalls everywhere in renovation. The renovation worker is not a friend, and it is impossible to start from the interests of the owner. For example, the laying of ceramic tiles mainly has two kinds of wet laying and dry laying, so whether the floor tiles are dry or wet is good, how to choose the dry or wet laying of floor tiles?

Let's find out.

First, the paving tiles are dry or wet paved.

1. Dry paving method of floor tiles.

The dry paving method of floor tiles can effectively avoid the occurrence of bubbles, hollow drums and other phenomena caused by the ground tiles in the paving process, but because the dry paving method of floor tiles is more labor-intensive and time-consuming, and the construction technology content is relatively high, the cost of the general dry paving method is much higher than that of the wet paving method.

2. Wet paving method of floor tiles.

The floor tile floor using the wet paving method may produce hollow drums and bubbles, which will affect the service life of the floor tiles, but because we often see the use of the wet paving method by decorators to operate is very simple, and the ** is relatively low, so there are still many families who still use the wet paving method to pave the ground.

Second, how to choose the hidden god to choose the dry or wet paving of the floor tiles.

1. How to choose whether to choose the dry or wet floor tiles, according to past experience, the wall tiles are generally laid by the wet method of floor tiles, and the floor tiles of special large size will be laid by the dry method of floor tiles, for example, the ground can be laid with 800 800 large tiles or large-size stones.

To put it simply, the large thickness of the floor tiles is dry, and the small thickness of the floor tiles is wet.

2. The important thing is dry brick paving and wet brick paving, as long as the operation is done properly, the quality of the project is the same, so don't be so entangled. In fact, only the stove bucket is the same as the technology at home, and the key is to find a reliable or even bricklaying master. It is also important to comply with technical specifications.

The above is all about whether the floor tiles are dry or wet or wet, how to choose the dry or wet tiles, I hope it can help you understand the dry or wet tiles of the floor tiles, more decoration knowledge, decoration company evaluation, decoration cases, please continue to pay attention!

When the house is being renovated, most residents choose to use floor tiles. Many people are unclear about the laying method of floor tiles. In fact, the most recommended method is wet or dry.

The differences in laying methods are still relatively large. How do you decide which method to use? How to lay floor tiles

Let's take a look!

In many home renovations, the general dry laying method can only be applied to floor tiles. The first step is to first wet the base layer with pie stuffy water, then remove floating sand and other debris, then start wiping the joint layer, and then dry the cement mortar in a ratio of 1 to 3 according to a certain horizontal line. Finally, the floor tiles are laid on cement mortar, which is gently leveled with a small hammer, then the tiles are removed and applied with cement grout to adhere them to the flat ground.

If we use the method of dry-laying tiles, we can avoid a series of problems after laying floor tiles, such as hollowing, air bubbles, etc.

Wet-laid tiles have recently become popular in the market. The difference is mainly due to the ratio of mixed materials. Wet paving is to replace the original 1 to 3 dry cement mortar with our ordinary cement mortar.

How to lay floor tiles - their advantages and disadvantages.

Floor tiles may have blisters and hollows, which will seriously affect the life of the tiles. Since the wet laying method is cheaper and more affordable, many homes now use this method of laying floor tiles. You should ask the person who does the work before you decide.

Written here, after the introduction, everyone should understand that the dry paving method and the wet paving method can not be one-sided to say who is good and who is bad, only to say that there is a difference between the two, specifically according to the requirements of the construction to determine whether to use dry or wet paving. See hereHow to lay the floor tilesFinally, I have the answer to the mountain.

You can get it for free