What are the main reasons for the resurgence of high rise interior walls

The reason for the resurgence of moisture on the wall.

The fundamental reason for the moisture return on the wall is the generation of water vapor, as long as you know that the water vapor comes from, then you can solve the problem of moisture return on the wall. There are roughly three reasons for the resurgence of moisture on the wall:

1. The waterproof layer of the outer wall of the building was damaged, resulting in water seepage in the building. If it is because of this reason that the wall is damp, then we need to contact the property or developer to carry out comprehensive management of the waterproofing of the exterior wall of the building. Water seepage on the exterior walls of buildings will be particularly obvious after rain and snow, which is also a big problem that we cannot solve by ourselves.

2. If the waterproof construction of the bathroom is not done well, it will also lead to the return of moisture on the wall, which often occurs when the bathroom is rebuilt with a light body wall. The bathroom must be waterproof, and the waterproof height must reach 2 meters, not only 30 cm in height. Otherwise, the water vapor will penetrate into the light wall through the tile and be absorbed by the light brick, and it will penetrate the wall after a long time.

3. The kitchen and bathroom often splash the wall to cause the wall to be damp, which is also a relatively common reason for the wall to return to moisture. This is especially more likely to happen on the wall under the cabinet and bath cabinet. Usually when we wash vegetables and dishes at home, the splashes of water and flowers flow down the cabinet wall and wet the wall.

It is recommended to use glass glue to fill the joints between kitchen cabinets, bath cabinets and walls to prevent water flow, and the phenomenon of wall moisture return can disappear.

The exterior wall is leaking, especially the air conditioning water is coming in, and the bathroom is leaking.

Take a look at it, if it is, repair it directly, if not, it is best to do an internal waterproofing, which is not a solution to the root removal, or a sandwich moisture-proof gypsum board, depending on the scene.

<> one is the splash of water used in daily life, the second is that the waterproof layer of the house is damaged to produce water seepage and moisture, the third is that the bathroom, kitchen and other places with large water consumption are not waterproof, and the fourth is the season caused by this usually occurs in the season from winter to spring, at this time, the indoor temperature difference is large, the external cold and internal heat form condensation, resulting in the wall damp moisture, and it may be that the indoor ventilation is not smooth enough, when the indoor humidity is more, there may be a phenomenon of moisture return without opening the window for ventilation. The solution is to use monotonous agents to prevent moisture and moisture, or to dehumidify with lime and bamboo charcoal, and put lime into a small cloth bag in the corner of the room, which can alleviate the phenomenon of indoor humidity.

The reasons for the resurgence of moisture on the wall: the waterproofing of the exterior wall is not damaged, the waterproof of the bathroom is not good, and the kitchen sink part is often splashed.

1. The waterproof layer of the exterior wall is damaged.

The waterproofing layer of the building's exterior wall is damaged, causing water seepage into the building. If this is the reason for the resurgence of our walls, you will need to contact the property or developer to completely correct the exterior walls of the building. The exterior walls of the building are seeping water, and the rain and snow weather is obvious.

This is a big problem that the owners can't solve on their own.

2. The bathroom is not waterproof.

If our bathroom is not very waterproof, it will cause the walls to be damp. Usually, this happens when the bathroom is heavily built with lightweight walls. The walls of the bathroom should be waterproof, and the waterproof height must be 1 8 to 2 meters.

It can't be 30 centimeters as usual. Otherwise, the water vapor is absorbed through the tile into the wall of the lamp body and absorbed by the lightweight brick. After a long period of time, the wall surface is penetrated, making the wall surface of the other wall without wall tiles damp and moldy.

If that's the reason, you'll have to re-waterproof.

3. The kitchen sink part is often splashed with water.

In our kitchen, the walls will be damp when splashing water normally. This condition is one of the more common causes of wall moisture resurgence. This is more likely to happen on the wall underneath kitchen cabinets and bathroom cabinets.

This is due to the fact that water is often splashed when washing vegetables and washing dishes along the walls of kitchen cabinets. It is recommended to use glass glue to fill the kitchen cabinets, the joints between the cabinet and the wall to prevent water from flowing and the phenomenon of moisture reflux on the wall disappears.

How to deal with the resurgence of moisture on the wall:

1. Use dehumidifier: If the room is wet, you can use monotonous agent and activated carbon to prevent moisture and absorb moisture. Monotonic agents and activated carbon can be used. There are many monotonic agents in supermarkets that are dedicated to moisture-proof and dehumidification, and the most common are two types: moisture-absorbing boxes and dehumidification bags.

2. Air dehydrating breather: It is like a vacuum cleaner, which can bring the humid air together, and when the humidity is a lot, it will turn into water. Use air conditioner to dehumidify.

Air conditioners used in homes generally have the function of dehumidification, but the method of air conditioning to dispatch indoor air humidity is slow, generally takes two or three hours, and will make people in the room feel cold.

3. Use lime and bamboo charcoal to dehumidify: use a small cloth bag to fill the appropriate lime, tie it into a small bag and place it in all corners of the room, the lime itself has the effect of moisture absorption, and it can also slow down the indoor humidity. Bamboo charcoal dehumidification can be used repeatedly, but it is used more, and the effect is not very good if it is less.

Summary. Hello, happy to answer your <>

Kiss, there is also a kind of daily splashing of water on the wall in the kitchen and bathroom, which causes the wall to be damp. This condition is one of the more common causes of wall moisture resurgence. This is especially likely to happen on the wall under the kitchen cabinet and bathroom cabinet.

This is caused by splashes of water splashing along the kitchen cabinet wall and wetting the wall. It is recommended to use glass glue to fill the joints between kitchen cabinets, bathroom cabinets and walls!

What is the reason for the resurgence of moisture on the wall?

Hello, it is a pleasure to answer the <> for you

The resurgence of moisture on the wall is due to the damage of the waterproof layer of the external wall of the building, resulting in water seepage of the building. This kind of cautious situation requires the property or developer to carry out a comprehensive renovation of the waterproofing of the exterior wall of the building. The exterior wall of the building is seeping water, and it is particularly obvious after the rain and snow slag hall, which is a big problem that the owner cannot solve by himself!

Hello slag search, happy to answer your <>

Kiss is pure, and there is another kind of daily splashing of water on the wall in the kitchen and bathroom, which causes the wall to be damp. This condition is one of the more common causes of wall moisture resurgence. This is especially likely to happen on the wall under the kitchen cabinet and bathroom cabinet.

This is caused by the splashing of water when washing vegetables and dishes along the kitchen cabinet wall and drying up the wet wall like the sock face. It is recommended to use glass glue to fill the joints between kitchen cabinets, bathroom cabinets and walls!

What is the cause of moisture return on the interior wall and what are the treatment methods? Let's take a look.

This condition is a more common reason for wall resurgence. This is especially true for kitchen cabinets and bathroom cabinets. This is because water is often splashed when washing vegetables and washing dishes along the walls of kitchen cupboards.

It is recommended to fill the joints between kitchen cabinets, bathroom cabinets and walls with glass glue to prevent water from flowing and disappearing wall phenomena from disappearing.

The waterproofing layer of the building's exterior wall is damaged, causing water to leak into the building. If this is the reason for the wall to return to the tide, you must contact the hotel or developer to completely correct the façade of the building. The exterior walls of the building are leaking, especially after rain and snow.

This is a big problem that the owners can't solve on their own.

If the insulation of the wall is not good, it will lead to a large temperature difference between the inside and outside. In this way, the water in the indoor air will condense on the walls of Wang Xun when it cools, which will make the walls wet. It can be ruled out by doing a compression test.

If the suppression test fails, it means that there is a leak somewhere in the pipeline.

Dehumidify with an air conditioner. Air conditioners for home use usually have a dehumidification function. However, the method of regulating the humidity of the air inside the air conditioner has a slower effect. It usually takes two to three hours and can make the person in the room feel cold.

When there is a lot of humidity outside, doors and windows must be closed to prevent moisture. In general, windows should be ventilated to reduce the amount of water vapor inside. It is a new house that has just been renovated. Water vapor is very large and requires ventilation and ventilation to eliminate moisture.

In indoor humidity, if you're not using a computer or TV, it's a good idea to make a protective cover to prevent cold air from touching the back of the appliance. These units should be turned on more, and the heat generated during machine operation can effectively drain moisture.

You can get it for free

Many people live at home for a period of time, will encounter the phenomenon of wall moisture, if not dealt with quickly, it may spread to moldy hair, not only affect the appearance but also bring great inconvenience to our life, then encounterHow about the resurgence of the wallsDo? NextHome Improvement Networkand solutions.

The reason for the return of moisture on the wall is usually that there is moisture, after a period of spread, the phenomenon of wall moisture return, to avoid the wall moisture, we must find the moisture in advance, eliminate it from the source, and find the problem of moisture return.

1. There are usually three reasons for the resurgence of moisture in the wall

1. The waterproof layer of the exterior wall is ruptured, resulting in water leakage

If this is the reason for the resurgence of the wall, it is necessary to contact the property or developer to carry out a comprehensive renovation of the waterproofing of the exterior wall of the building. Water seepage on the exterior walls of the building, especially after rain and snow, is a big problem that the owners cannot solve on their own.

2. The waterproof measures in the bathroom are not done

Generally, this situation often occurs when the bathroom is rebuilt with a light body wall. The bathroom must be waterproof, and the waterproof height must be 2 meters high, not only 30 cm high. Otherwise, the moisture penetrates into the light wall through the tile and is absorbed by the light brick, which will penetrate the wall after a long time, and the liquid tremor will make the other wall surface that is not attached to the wall tile damp and mildew.

If this is the case, you have to do it againWaterproofing construction

3. Splash water accumulation and soaking

This condition is one of the more common causes of wall moisture resurgence. This is especially more likely to happen on the wall under the kitchen cabinet and bathroom cabinet. This is caused by splashes of water splashing along the kitchen cabinet wall when washing vegetables and dishes.

It is recommended to use glass glue to fill the joints between kitchen cabinets, bath cabinets and walls to prevent water flow, and the phenomenon of wall moisture return can disappear.

2. What should I do if the wall is damp again?

Wall resurgence:

In winter, the wall can be coated with a layer of gypsum board, or brushed with a layer of waterproof paint, which can achieve the moisture-proof effect. There will be no problem. If the wall keeps getting wet, it is recommended to shovel the wall and redo the waterproofing.

The constant return of moisture is not a problem with window ventilation, but a failure to waterproof the wall. If it is really the cause of the wall, then only the modified wall is re-waterproof and waterproof, pay attention to the new waterproof layer and the old waterproof layer to do a good job of link processing, need to follow the regular manufacturer's instructions for construction, after the construction to do a good job of closed water test. Although the closed water test is more troublesome, it is necessary.

Ground resurgence:

Mopping the floor with salt water dries faster, and in the "resurgence" weather we only need to mop the floor with hot water and put a little salt in it. First of all, we heat the water until it is not hot to the hand, and the water temperature is about 40 degrees Celsius. Next, we add a spoonful of salt to the water, stir slightly, and when the salt is fully dissolved, we can start mopping the floor.

Soak the mop in hot salt water and wring it out as much as possible to mop the floor clean. This is because the evaporation rate of the liquid is related to the temperature, the higher the temperature, the faster the evaporation rate, and the floor will naturally dry faster when mopping the floor with warm water.

The resurgence of moisture on the walls of the home is a problem faced by many people. Finding dampness on the wall will not only affect the aesthetics of the home decoration, but may also harm the health of family members. The normal degree of moisture return on the wall is due to a certain extent due to the phenomenon of self-aging, but if the degree of moisture return is too large, then there may be some reasons for this.

1.Substandard building materials: Substandard building materials can be a major cause of wall moisture resurgence.

Problems such as high moisture content in building materials and air leakage in materials lead to dampness of the wall materials themselves. In addition, poor quality construction materials and water leaks created during the construction process will only contribute to dampness in the walls.

2.High moisture: Moisture is another cause of moisture resurgence on the wall.

High levels of moisture often lead to condensation on the wall, which is also an important factor in the return of moisture. When the moist air condenses, it releases moisture and silver seepage on the surface of the wall, causing the wall to become damp and damp.

3.Poor bathroom ventilation: Poor bathroom ventilation in the home is another common cause of wall moisture return. Moisture is generated very quickly in the bathroom, and if it is not removed in time, the walls and ceilings in the bathroom will become damp, and the walls will be moistened.

4.Rainwater accumulation: During the rainy season, rainwater accumulates on the outside of the house for a long time, increasing the risk of dampness. If there is not enough drainage facilities on the outside of the wall, in the case of rain, the rainwater can easily seep into the inside of the wall, causing the wall to regain moisture.

5.Human factors: Human factors are also one of the main causes of wall moisture resurgence. For example, placing too many plants, leaking water tanks, etc., can easily lead to dampness and moisture resurgence on the walls of the home.

To solve the problem of wall moisture resurgence in the home, we need to diagnose and repair the cause. Choosing the right building materials is the most effective way to do this. Installing good ventilation inside the house is also an effective way.

At the same time, we should also clean up rainwater in time during the rainy season to prevent floods. At the same time, avoiding too many plants in our homes and regularly checking our faucets and pipes for leaks can help reduce moisture resurgence on the walls.