What s the deal with succulent leaf cuttings that don t take root?

It is not difficult to grow roots with succulent leaf cuttings, but it is also difficult to root if you use leaves that are too tender or too old. Therefore, it is best to choose leaf cuttings in the prime of life when cutting leaves. Later management is proper watering and sun exposure to prevent succulents from growing.

The reason is that the cuttings are not well chosen. Not all succulent leaves can be successfully cuttings, and strong leaves should be selected as cuttings and cut at a 45-degree angle with scissors.

First, the time of cuttings.

Most succulent varieties have dormant habits, and their dormant period is either in summer or winter, during which the succulent will stop growing. Therefore, propagation by cuttings should not be carried out during dormancy, and in the south, it is necessary to avoid the rainy season.

Second, the choice of blades.

Choose mature and plump leaves, and remove them by pinching the leaves tightly and gently shaking them from side to side around the leaf growth point to remove the leaves completely without damaging the stems.

It may be the reason for the relatively low temperature, the succulent leaves, cuttings must be properly supplemented with some water at a room temperature of 15 to 25 degrees, and they will germinate quickly.

Why does the leaf cuttings grow succulentlySome people say that this is caused by a misunderstanding that succulents need less watering, and leaf cuttings should be watered more to grow faster.

In fact, there is some truth to this statement, but in practice, you will find other problems.

But if you have a variety of varieties, you will find that some of them grow very quickly, and some of them will grow very slowly.

So is there a better way?

Absolutely,I usually transplant the leaf cuttings after the sprouts are formed, so I usually buy a lot of small black cubes, just for transplanting leaf cuttings, the transplanted seedlings not only have more room for growth, but also more convenient to manage.

Therefore, the process of transplanting at this time is the process of changing the soil, and at this time it can be replaced with about 70% peat soil, which is more conducive to the growth of seedlings.

After transplanting, the seedlings can be directly placed in a sunny place for normal maintenance in two or three daysThe soil should be watered when it is dry, and the seedlings must have sufficient water to thrive, and the purpose of water control is to boil the state, and the color is more beautiful, and it is not suitable for the seedlings that have not grown up.

As for why you don't directly separate leaf cuttings at the beginning, of course, that is fine, but it is more labor-saving to put directly in a large vessel, so that as long as the leaf cuttings are successfully transplanted in good condition, it will not waste effort.

Why succulent leaf cuttings, sometimes grow slowly, most likely because of this!

Second, you don't know that something is wrong with your maintenance methods. Many people think that adult plants and succulents like a dry environment, and they think that leaf cuttings and seedlings are also maintained, but they don't know that leaf cuttings and new seedlings are very fond of water. Although the new seedlings of leaf cuttings have grown new leaves and new roots, they are very fragile and need to be maintained in a light and humid environment.

If there is no watering, the soil will dry up, the roots will soon wither, and the leaves will not grow without nutrients, but may die.

Third, your leaf cuttings are used incorrectly. Succulent leaf cuttings should be made of breathable, loose nutrient soil, and a small amount of granular soil can be used, but granular soil must not be used. If there are too many particles in the cultivation soil, it is not conducive to the seedlings taking root, and it is easy to lead to the stiffness of leaf cuttings.

Moreover, if there are too many particles and do not retain water, the seedlings will grow very slowly, which is the same as the water control of adult plants.

Leaf cuttings also have a lot to do with the season, if you want leaf cuttings to grow fast, then choose to carry out leaf cuttings in spring, and the seedlings must grow fast. If the leaves are cut in summer, the failure rate is high, and the high temperature is not conducive to the growth of new seedlings. You can water the new seedlings once a day, but don't overdo it, or you will quickly harvest a plate of "bean sprouts". ‍

The reason why only roots grow and do not sprout:

1. Nodules: If a package grows at the growth point, it will affect germination. This need to be cut off as much as possible, otherwise it will be difficult to germinate new shoots, and it will only make the leaves grow bigger and bigger.

2. The root system grows too vigorously:

If the new roots grow too luxuriantly, it will also affect germination, because the root system will gradually grow, and there will be no nutrients and space for the small shoots to grow. At this time, some roots need to be pruned, and after a while, buds will grow.

Post-budding treatment:

1. There will be different situations after the succulent budding of leaf cuttings, the first is not only the growth of buds but also the growth of roots, at this time without any treatment. Wait for it to grow for a while, transplant it directly into the new potting soil, and after a few days, normal maintenance will be fine.

2. If it is said that it only sprouts and does not grow roots, you need to let the seedlings continue to grow, and when it grows to a certain extent, it will grow roots, and you can transplant them. If the mother leaf turns black, it should be taken out, cut off, and dried to re-root.

1. Insufficient light: Succulent leaf cuttings will only grow roots and not sprout when there is a lack of light, so they need to be placed in a sunny place. 2. Overwatering:

Succulents are drought-tolerant plants that need to be watered every 7-10 days. 3. Soil discomfort: It is best to replace the loose and breathable soil with rich organic matter for the succulent to promote its rapid growth of new leaves.

1. Insufficient light

Succulent is a sun-loving plant, it needs sufficient light during the growth process, when the leaf cuttings are succulent, if it is placed in a dark place for a long time, it will cause the plant to be unable to photosynthesize, so that the succulent can not germinate, the succulent needs to be placed in a bright place to ensure that the plant receives no less than 5 hours of light every day.

2. Overwatering:

Succulent is not resistant to moisture, it is suitable for growing in a dry environment, when breeding succulents, if watering too frequently, it will lead to plant rotten stems, you need to control the frequency of watering, it is best to water every 7-10 days, and when watering the succulent, you can not sprinkle water on the center of the leaf.

3. The soil is unsuitable

When cultivating succulents, if the soil is stiff and compacted, it will lead to poor respiration of the root system of the plant, and it is necessary to replace the loose and breathable soil for the succulents, and you can use a mixture of humus, sand and vermiculite to make a cultivation medium, and apply rotten cake fertilizer to the soil to promote the vigorous growth of the succulents.

4. Bud-promoting method

If you want to grow succulent buds, you need to use a sharp knife that has been sterilized, make a slight cut on the leaves of the plant, let its small buds grow out of the cut, and in the succulent growth season, apply nitrogen, phosphorus and potassium compound fertilizer once a month to provide the nutrients needed for the growth of the plant, so that it can germinate and grow leaves quickly.

Succulents take a certain amount of time to establish their root system after rooting, and in the process of establishing their root system, they may consume a lot of nutrients, resulting in slowed plant growth. In addition, if succulents are exposed to environmental changes or stress deficits, they may slow or stop growing in response to these changes. Therefore, even if the cuttings have taken root, the following points need to be considered to provide them with a suitable growing environment:

1.Light: Most succulents need plenty of sunlight and light to promote leaf growth, and not having enough sunlight can cause plants to grow slower or even stagnate. However, in the high temperature of summer, you need to pay attention to avoid direct sunlight, otherwise photoburns will occur.

2.Temperature: Succulents are suitable for warm and dry environments, not too cold or too humid.

3.Moisture: When cuttings are dead and touching roots, they need to be watered appropriately to maintain soil moisture, but not too much, so as not to cause root rot. Typically, cuttings can start gradually increasing the amount of watering once they start to notice that the shoots are growing.

4.Loam: Succulents generally prefer loose and well-drained soils. It is recommended to choose a special succulent soil or a mixed soil made with an appropriate amount of perlite, humus soil and river sand to cultivate succulents.

If you've taken note of the above factors and the succulent still hasn't grown leaves, it could mean that it needs more time to regain growth. Please be patient, but also pay close attention to the health of its withered reputation and adjust the maintenance method appropriately.

It may be that the lead reed is due to the lack of nutrients in the cuttings, or the cuttings did not receive enough light in the first place, which caused the growth to be slow and the growth was slow. In addition, succulents grow slowly, so you need to be patient and give more light and nutrients, and you will slowly grow leaves.

Succulent leaves do not take root for the following reasons:

The leaves of succulents are not suitable for propagation, and the stems of succulents should be used for propagation.

The air humidity is insufficient, or the succulents are placed in a poorly ventilated location. Succulent propagation requires a certain amount of humidity and air circulation.

Succulent leaves are not healthy enough to reproduce.

In response to the above problems, the following methods can be taken:

Succulent stems are used for propagation by cutting off the stems, drying them for a period of time, and then inserting them into a suitable propagation medium.

To increase air humidity and ventilation, you can place some moisture around the succulents or use a humidifier to increase the humidity of the air, and place the succulents in a suitable ventilation location.

Ensuring the health of the leaves of succulents can avoid problems such as overwatering and excessive sun exposure, and regularly check the health status of succulents.

In short, for the problem of succulent leaves not rooting, it is necessary to analyze the specific causes and take corresponding measures to solve it to ensure the healthy growth and reproduction of succulents.

Succulent rooting is a phenomenon of its growth, and succulents can root in the air, so we don't have to worry about succulents rooting. What are the solutions for succulent leaves not rooting?

1. Prepare soil.

Succulents have high requirements for soil, and suitable soil should be prepared for leaf cuttings. The soil should be soft, breathable, drainable and fertile, and can be prepared with a mixture of vermiculite, humus, and a small amount of river sand, or you can buy special soil for succulents. In addition, the soil should also have a certain amount of humidity, and the appropriate amount of water can be sprayed, so that the soil environment is conducive to leaf rooting.

2. Handle the blades.

Succulent leaf cuttings can take root and survive as long as the method is appropriate, and the survival rate is relatively high. It is best to choose leaf cuttings in spring and autumn, the climate and environment are suitable, and it is easy to manage after cutting, and this is the peak season for succulent growth, and the activity is strong. The leaves must be strong and full, and care should be taken when picking them so as not to hurt the bud points.

If you want to root the leaves as soon as possible, it is best to soak them in the rooting solution for about 20-30 minutes. After soaking, take it out, put it in a cool, well-ventilated environment to dry, and then dry the water before cuttings.

3. Insert the soil.

After the succulent leaves are processed and the substrate is prepared, cuttings can be carried out. When cuttings, the leaves are facing up, which can be placed directly and evenly on the soil surface, or a shallow groove can be poked on the soil surface, and then the leaves are inserted, and the bottom of the leaves is stained with soil, and there is no need to cut too deep.

4. Later maintenance.

Succulent leaves that have been cut need to be managed, and it is best to put them in a warm, well-ventilated environment, usually providing an environment of 20-25, and the temperature does not need to be too high. Although succulents like light, they don't need to see light before rooting, just put them in a cool place. The environment is suitable for about 20 days to take root, and when the root system grows steadily, it can be planted in the soil, and the soil is slightly moist, and the survival rate is extremely high.

1.There are many reasons why succulent leaf cuttings only grow roots and do not sprout.

2.The leaves contain more water: the succulent leaves are broken off, and the leaves contain more water, which cannot stimulate the growth of the bud point limb wheel, and can only take root to maintain growth.

3.Lack of light: Succulent leaves lack light after growing after cuttings, and their photosynthesis is poor, so they cannot germinate and grow.

4.Soil discomfort: The soil is compacted and not breathable, which will affect the growth of roots and make it difficult to germinate.

5.Overwatering: If you overwater or the soil is moist, it will also not germinate.