What to do if the tires of a manual transmission car are blown out

If it needs to be disassembled, it is generally the brake or the bearing is locked. I hope mine can be helpful to you.

1. If a motor vehicle has a puncture, you must calm down first, and then follow the following operations to make the vehicle stop safely and smoothly as soon as possible

1.When you realize a puncture, you should hold the steering wheel with both hands, try your best to control the steering wheel from turning on its own, and try your best to turn in the opposite direction of the puncture to ensure that the vehicle runs in a straight line.

2.When a flat tire on one side of the vehicle is running, you will feel the body tilt, which will increase as you drive longer, and it will be difficult to control the vehicle.

3.When you find a flat tire while driving, you should hold the steering wheel tightly, brake slowly and slow down, drive the vehicle off the roadway as soon as possible, and park it in a safe place on the side of the road.

4.When the vehicle leaves the driving lane, it is not possible to brake urgently, otherwise it will be very easy to cause a rollover or cause a rear-end accident because the east of the rear car is not timely.

5.When the direction is controlled, quickly grab the low-speed gear, and use the engine drag effect to brake the vehicle. Do not use the brakes to stop until the engine drag is under control to avoid a rollover or rollover.

6.Don't brake suddenly, press the brakes lightly and slow down slowly, because the sudden puncture of the car at high speed will make the vehicle deviate sideways, and sudden braking will make this side deviation more serious, resulting in a rollover.

7.After controlling the direction and stopping the vehicle slowly, the hazard warning flashing lights should be turned on in time and the warning triangle should be prevented to remind the rear car to pay attention.

If the brake box is broken, open the gear box to see if the gear is broken or the bench is broken, and push it to the repair shop.

Call a trailer. There was a problem with the gearbox.

Call a trailer. Tow it to an auto repair shop.

1. The handbrake is made with the engine.

Manual transmission. If the brakes of the car with manual transmission fail, let go of the accelerator pedal as soon as possible. Press the clutch to downshift to achieve the purpose of generating traction from the engine.

Constant downshifts and handbrakes can achieve the purpose of deceleration. However, when you pull the handbrake, you can't pull it to death, and you can do it all at once. Otherwise, there is a lock-up of the rear wheels and the vehicle may lose control again.

Automatic. Nowadays most cars are automatic. Although it is said that the automatic transmission does not have the obvious effect of downshifting in the manual transmission model.

And there are also some gearboxes that do not have a downshift function. Therefore, if you need to downshift, you should downshift with the handbrake, and when you pull the handbrake, you should press and hold the unbrake button, and then pull the handbrake continuously, press the electronic handbrake after pulling it up, and slowly stop the car.

2. Choose the emergency lane brake.

If the above methods still fail to brake, you need to pull the warning light of the vehicle at this time to avoid injuring innocent vehicles. At the same time, it is also necessary to find some suitable sections of the road to slow down, and it is a good choice to have an emergency shelter or an uphill road.

3. Take advantage of obstacles on the road.

In the event of brake failure, the above methods are not applicable. The car owner can only stop the car from some large trees and large parking objects or even houses that may be encountered on the side of the road as a buffer obstacle for the car to brake. However, this method is a good idea, and the owner may be in danger, and it will also cause some damage to the car.

However, I have to say that the performance of the car is quite stable now, and as the owner must do a good job of regular maintenance, it will generally not be out of order. And once the brakes fail, you must be calm and calm, don't mess up. to find the ideal solution.

Locking is when the brakes (whether disc or hub) clamp the tires tightly, and the tires do not move relative to the brakes. In other words, the tires don't turn and the car slides like a brick on the road.

When the car brakes urgently at a high speed on a wet or icy road surface, it is likely that some dangerous situations will occur: the rear of the car deviates from the direction of travel during braking, and in severe cases, the car will rotate and turn around, and the car will lose directional stability, which is called side skidding.

Another situation is that the driver can not control the direction of the car during braking, that is, the car loses its directional maneuverability, if braking in a corner, the car will slide out along the side of the road or break into the opposite lane, even if it is a straight line braking, it will lose control of the direction and can not avoid the opposite obstacle.

The reason for these dangerous conditions is that the wheels of the car produce the locking phenomenon in the braking process, at this time, the movement of the wheels relative to the road surface is no longer rolling, but sliding, and the side-slip friction and longitudinal braking force acting on the tires on the road surface become very small, and the more slippery the road surface, the more likely the wheels are to lock; At the same time, the higher the initial velocity of the car's braking, the greater the danger caused by wheel locking.

Workaround:

One is a forced start, slamming the throttle.

system, as long as the rear wheel can move, it is normal.

The second is to remove the tires, take a hammer or something like the brake drum twice, and let the joint surface of the brake drum and brake pads loosen.

This situation is normal, and most of them are driven in the rain or after the car is washed for too long.

In the future, after washing the car or raining the brake drum into the water, do not stop immediately, drive for a period of time and step on the brake to let the water evaporate or do not pull the handbrake when parking, the manual gear is hung in 1st gear, and the automatic gear is hung in P gear, and the car will never slip away. In this way, the brake drum does not contact the brake pads and will not cause rust.

Generally, after rain or car washing, the vehicle is parked for more than a certain time (generally about a day), and the inside of the rear brake drum and the surface of the brake pad are easy to grow.

Rust leads to rust death.

There are two solutions, one is to force the start, slam the throttle, as long as the rear wheel moves, it will be fine. The second is to remove the tires, take a hammer or the like according to the brake drum and knock it twice, and let the joint surface of the brake drum and brake pads loose. There is no need to check anything, it is normal, and problems can be avoided as long as the response is done properly.

First of all, after washing the car or raining the brake drum into the water, do not stop immediately, drive for a period of time and step on the brake twice to let the water evaporate or do not pull the handbrake when parking, the manual gear is hung in 1st gear, and the automatic gear is hung in P gear, and the car will never slip away. In this way, the brake drum does not contact the brake pads and will not cause rust.

Hello, check to see if the handbrake cable does not return, or the brake pads are rusty and sticky. If you have any questions, please feel free to contact us and wish you a happy life! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, this is caused by rust between the brake pads and the brake disc, it is recommended that you check the return screws of the brake cylinder [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

In this case, you can hit the brake hub with a hard object when the handbrake is released.

What kind of car is the rear wheel burst Is it a drum brake or a disc brake Is it a drum brake, the tire is removed, and the hammer is knocked a few times The disc brake is going to split the pump [If the car has a problem, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Release the throttle, grip the steering wheel with both hands, and then gently apply the brakes after stabilizing the direction (remember!! Do not slam on the brakes!! Until the vehicle comes to a complete stop, pull the handbrake, double flash, get out of the car, and place a warning sign (150m away on the highway).

If you have experience in operation, you can consider changing the tire yourself, and if you are not sure, call ** for help. Generally speaking, if you have a flat tire on an ordinary highway, you can consider changing it yourself, if you are on the highway, it is recommended to leave the car immediately after placing the warning sign and call for rescue, and it is too risky to change it yourself.

Hello car owner, in this case, you should not panic, and do not slam the direction, intermittently press the brake pedal. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, do the following [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

1. Disassemble the tire

When disassembling the tire, do not immediately jack the jack to jack the car, you must first use the screw rocker arm to loosen the screws on the wheel one by one, when loosening these bolts, the method of loosening diagonally one by one should be adopted, so as to prevent the fasteners from being deformed due to uneven stress.

2. The use of jacks

Once all the bolts are loosened, the vehicle can be lifted (note: only loosen before lifting the vehicle). Before lifting the vehicle, the first thing to find is the position of the jack support, because the frame support point of each car is different, usually most car manufacturers will make a mark in the corresponding body position, so that everyone can find it, and if you can't find it, you can only climb down and touch.

3. Install tires

The most laborious thing to install the tire is how to align the spare tire with the wheel fixing bolt hole, it is best to have the help of others, if a person operates it is recommended to use the legs or feet against the spare tire to prevent displacement, and then tighten the bolts diagonally slightly.

Preparation before changing tires.

1. Safe parking.

After finding that the tires of the vehicle have a flat tire or a flat air, do not panic, do not stop in the middle of the road, immediately turn on the double flash, move the vehicle to the side of the road or emergency lane, try to choose a flat road surface, and avoid turning or slope. Go to the park, wait for the vehicle to be parked, turn off the engine and pull the handbrake.

2. Place a warning triangle.

When it is confirmed that it is safe, the warning triangle should be placed immediately. The position of the triangle should be placed 50-150 meters behind the vehicle, and if it is a highway, it should be placed 150 meters behind the vehicle; In rainy and foggy weather with low visibility or at night, it is necessary to place the warning sign 100 meters behind the car.

First of all, we need to prepare the tools and equipment needed for the whole process of disassembling car tires, a tire wrench, a small hook, both of which can be found in the trunk of the car, a jack, and it is best to prepare a small box for screws.

02 Removal of tire screw caps. Take out the small hook, as shown in the figure, hook the hole of the screw cap with a small hook, and then pull it out to remove the screw cap, a total of 5, everyone take it off one by one, and the screw cap should be placed in a small box to avoid loss.

03 The initial loosening of the screw of the automobile tire. Take out the tire wrench, use a special tire wrench to stick on the screw, and then turn it counterclockwise, just loosen it, because the tire is easy to operate on the ground, you don't need to remove it, and you can loosen all 5 screws.

04Support the area where the tire needs to be removed. Take out the jack, find the support point of the stiffener in the place of the car chassis, and then use the jack to support the vehicle until the tire that needs to be disassembled is removed from the ground.

That's a pretty brutal answer:

1. As long as you keep your hands on the steering wheel at all times, a flat tire is not terrible;

2. As long as your first reaction is not to slam on the brakes, a puncture is not terrible;

3. As long as your first reaction is not to play against the sudden change of direction, a flat tire is not terrible.

The most feared thing about the vehicle is a puncture, and a puncture is easy to cause a safety accident, so what should I do if I get a flat tire when I drive half of the car?

Do not brake suddenly.

Do not brake suddenly, but slow down. Because the sudden puncture of the car at high speed will cause the vehicle to deviate sideways, and sudden braking will make this side deviation more serious, resulting in overturning.

Hold the steering wheel firmly.

While slowing down, hold the steering wheel with both hands and turn in the opposite direction of the puncture to ensure that the vehicle runs in a straight line.

Enter the emergency parking strip.

After stabilizing the car, the vehicle will be driven into the emergency parking zone as soon as possible, so you have two options, one is to contact the tow truck to save you. Or put on a spare tire that has been waiting for you for a long time.

Step 1: Park your car in a safe and horizontal place and activate the warning lights. If you encounter a flat tire while driving, remember to stay calm, keep your hands on the steering wheel, and try to drive slowly to a safe roadside and stop.

At the same time, when driving an automatic transmission car, the gear should be shifted to P gear, and the manual transmission car should enter 1st gear or reverse gear.

Step 2: Before getting out of the car, observe the surrounding traffic conditions, and make sure that it is safe to get out of the car and take out gloves, spare tires and other related tools in the trunk of the car, and prepare to replace the tires.

Step 3: First, loosen the rim screws diagonally.

Step 4: Then place the jack on the chassis bracket and slowly lift the body until the tires are only slightly against the ground. Then put the spare tire under the car to prevent the car from falling suddenly.

Step 5: Then you can loosen the screws one by one.

Step 6: At this time, turn the jack again to raise the body by about 10 cm, making sure that there is enough space to put in the properly inflated spare tire. Then remove the punctured tire, put it under the car, and attach the spare tire.

Step 7: After attaching the tires, make sure the screws are in the correct position and tighten the screws diagonally. Since the wheels are still suspended in mid-air, the screws cannot be tightened to the tightest state.

Step 8: Then remove the tires under the car and slowly lower the jack. When the tires hit the ground, they can be locked diagonally one by one.

Step 9: Finally, take the jack and the burst tire back into the trunk of the vehicle, and drive to the maintenance center as soon as possible to replace the broken tire. The most important thing is that the car should be supported, and the way the screws are fixed should also be paid attention to, these two points are crucial.